beckhoff p 10 used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16100 € : 309.12 € : 100 to : fix : 300 mm : 680 mm : 1020 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2350 mm : 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to : 400 mm : 850x630 mm : 850x640 mm : 685 mm : 250 mm/s : 10-20 mm/s : 11 kW : 2030 mm : 1150 mm : 3565 mm : 7700 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully functional. Free loading, forwarding possible, please call if you have any questions.

Boiler was pressed off by me with 2 bar. I have not tested gas burners, can only guarantee tightness of the boiler. Unfortunately, I don't know the year of construction.

Stock # UG6398 Unused horizontal sand mill with contact parts made of abrasion-resistant stainless steel, manufactured by TEST Sp. z o.o. (Poland) model MP-100. The machine has a 100-liter milling chamber. The mill is equipped with a rotor with abrasion-resistant discs. The machine is belt-driven by an electric motor with a power of 55 kW, 1450 rpm, 400 V, 50 Hz, and IP54 rating. The mill is equipped with a feed pump, electrical control panel with frequency converters and zirconium balls with diameters ranging from ø 1.4 mm to ø 2.7 mm. Included full technical documentation. Year of manufacture: 06-2023.

Groninger plastic bottle filling & capping line comprising ZSB 2000 empty bottle unscrambler, DFV 10005Q in-line filling machine with 10 filling stations with cross-feed function, dosing range of 5 to 1000 ml, bottle height from 30 to 250 mm, transport cup dimensions (pucks) 108 x 80 mm and KVK 106 rotary capping machine with 6 capping stations with ZSK 1500 cap sorter and a lift-off conveyor for the transport cups (pucks), capacity up to 150 bottles per minute

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

Wire cutter Type: AU-1000 iA Manufacturer: ACCUTEX Year: 2015 Max size of the work piece:1330 x 900 x 595 mm Max. weight of the work piece: 5000kg X/Y/Z/U/V 800 / 600 / 400 / 150 / 150 mm Diameter of the wire: 0.15-03 mm Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone ± 22.5 °/ 100 mm Accuracy class of ball screws rpm C1 - the highest Filter system capacity l Main tank 1630 l, secondary tank (Z=600) 1280 l Max. cutting speed mm²/min 250 Dielectric conductivity measurement Auto – 5  200 k-cm Auto dielectric temperature measurement with an accuracy of ± 1°C Input kVA 15 Weight of the machine: 8500 kg Windows CE control system product for vertical alignment paper filter 2 pcs deionization resin - 1st filling container for deionization resin upper and lower nozzles – 2 pcs diamond guide 2 pcs tool for removin ...

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - / Contact us at -

Manufacturer: Motan Model: Gravicolor 100 Type: GC 100-P-Z Year of Manufacture: 2008 Type of Machine : Dosage Unit Condition: Used Electrical Data - Supply voltage: 1N/PE 230 V, 50 Hz - Power consumption: 0.26 kW - Rated current: 2.5 A - Control voltage: 24 V DC - Delayed fuse: 10 A Find more here - / Contact us at -

Brushing machine brand: Ecoline Type: Rustikmat 2-1000 New machine 2 brushes More stability due to the lower brush position Length of the brushes 1000 mm; Diameter 270 mm. Power 4 kW per brush. Each brush can rotate in synchronism and counter-rotation. Working width: 1000 mm Working thickness: 120 mm. Workpiece dimensions: Min. length: 350mm Max. Width: 1000mm Max. Thickness: 120mm Electric adjustment of thickness, speed and feed with digital display. Spindle diameter 50 mm. Infinitely variable feed: 0 - 12 m/min. The speed of the brushes and the feed speed are controlled by frequency converters. The heavy machine bed allows deep structuring of the plates.

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Sliding table saw ALTENDORF F 35 Type 3 - 1000 exhibition machine 5.5 kW (7.5 HP), 3 speeds, Motorized height and swivel adjustment, Large protective hood, Double trolley 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, Cutting width 1,000 mm, Angle mitre stop 3,450 mm, without length compensation, Table top extension/table top extension:, With high-quality CDF surface---------- Technical data ----------Swivel range: 0 - 46 , Carriage length: 3,200 mm, Cutting length: 3100 mm, Cutting width: 1000 mm,

Mazak Integrex i-100H SYear of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mmTurning length : 850 mm____________Description:In General:Year of manufacture:2023Control system:Mazak Mazatrol SmoothAiMax. machining diameter:600 mmMax. machining length:850 mmMain spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Chuck:3-jaw chuckClamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Tailstock function:YesTool carrier (X/Y/ZB):Technology:Travelling column with milling spindleX-axis:535 mmY-axis:210 mmZ-axis:900 mmB-axis:-30° / +210°Milling spindle speed:20,000 rpmPower:24 kWTool magazin:Technology:Shelf magazineNumber of stations:250Tool changer:Double gripperEquipment:Chip disposal:Chip conveyorCoolant s ...

Nakamura NTJ-100Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mmTurning length : 678 mm____________Description:In General:Year of manufacture:2015Control system:Fanuc i 31-BTurning diameter:175 mmMax. turning length:678 mmSpindle:Technology:Motorised spindleSpeed:4,500 rpmPower:11 kWBar capacity:65 mmC-axis:0.001°Clamping cylinder:Hollow clamping cylinderChuck:Collet chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmPower:7.5 kWBar capacity:51 mmC-axis:0.001°Clamping cylinder:Semi-hollow clamping cylinderChuck:Collet chuckTool carrier I (X/Y/Z/B):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:330 mmY-axis:80 mm (+/- 40 mm)Z-axis:1,040 mmB-axis:182° (+/- 91°)Tool carrier II (X/Y/Z):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:127 mmY-axis:65 mm (+/- 32.5 mm)Z-axis:678  ...

Size: 1045 x 1135 mm Equipments: Thermal laminating Flat pile feeder IA 20 Suction feeder head Automatic rotary separator ITM 104 Jogger Maximum laminating format: 1045 x 1135 mm Minimum laminating format: 215 x 215 mm Substrate thickness: 150 - 450 g/sqm Foil thickness: 24 - 40 microns Speed: 2500 - 4500 sheets/hour

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: ? kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 3 x 2,5 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: ? kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 3 x 3,2 m Table clamping surface 1,270 x 590 mm max. table load 1,350 kg feed rate 15,000 mm/min rapid traverse 20 m/min Tool holder ISO 40 24-position tool changer Chip conveyor IKZ Preparation for IR - measuring probe ( Renishaw ) SELCA control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8900 € : 171.77 € : 100 to : fix : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2500 mm : 1000 mm : 2200 mm : 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 € : 96.69 € : 100 kg : 150 mm : 150 mm : 360 ° : 120 kgm : 230 / 50 V / Hz : 0.25 kW : 0.25 kW : 0.1 - 3 U/min : 30 s : 350 mm : M12x6 mm : 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - o ...

Key data: 1000 kN

BILLION H260 / 100 - 100T Type: H260/100 Clamping Force: 100T Control: Dixit 500 Operating Hours: 25,000 h Distance Between tiebar: 445 x 445 mm Platen Dimensions (H x W): 630 x 630 mm Mold Thickness (Min/Max): 180-400 mm Opening Stroke: 380 mm Weight: 5100 kg Dimensions: 4.6 x 1.7 x 2.1 m

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm

A gravimetric dosing and mixing unit for plastic granulate Motan is available. Dosing stations: 4, throughput capacity: approx. 150kg/h, reference bulk weight: 0.6kg/dm³, container volume: 4x18l. Machine dimensions X/Y/Z: approx. 600mm/650mm/920mm, weight: approx. 100kg. An inspection on site is possible.

Edge banding machine Type: STREAMER 1057XL Manufacturer: Holz-Her Year: 2019 Max. edge thickness: 8 mm Max. part thickness: 60 mm Manual adjustment of the thickness of 0.5; 1a 2 mm abs edge PUR+EVA Fully equipped New glue application unit, new diamond cutters + spare cutters not yet ground. Machine in good condition, fully functional, under power Find more here - / Contact us at -

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10000 € : 193 € : 100 to : horizontal verschiebbar : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2630 mm : 1000 mm : 2430 mm : 1600 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is a used Drautz leaching machine type RD 100 for sale. The machine is cleaned, checked, works perfectly and is in good condition. All plastic bushings are fine and not knocked out. With short puller, a long puller can be offered on request. Price: 3500,--€ excl. VAT ex stock Straubenhardt (Germany)

Double corner round slotting machine Tränklein EK-D 100; cleaned and tested; 2x Knife 16mm (other sizes on request); Insertion height max.100mm; optical sensor; Foot release. Double corner rounding machine Tränklein EK-D 100; cleaned and checked; 2x knife 16mm (other diameters on request); max.pile hight 100mm; optical sensor; foot switch.

turning diameter: 500 mm turning length: 1000 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

Mixer silos SPIROFLUX MVRTS 1000 Type : MVRTS 1000 Liters

Mixer silos SPIROFLUX MVRTS 1000 Type : MVRTS 1000 Liters

Excellent condition - Fully operational - Loading / Transport possible! saw: Kappa Automatic 100 lifting table: Silverstone HW4002 with lifting capacity 4000 kg KOGI dust extraction system with a capacity of 4000 m3/h AIR BOX compressor with GUDEPOL dryer Main Saw Size: max. fi355 x 30 mm min. 250 x 30 mm size of scoring saw: fi150 x 30 mm Installation Dimensions: saw: 7250 x 6050 x 1900 mm lifting table: 2000 x 1200 x 250 mm dust extraction: 3200 x 750 x 2800 mm compressor with dryer: 2100 x 500 x 1000 mm Transport Dimensions: Front saw beam: 7650 x 900 x 1800 mm Front Supports: 2100 x 700 x 1000 mm bumper beams and fencing: 4600 x 1000 x 1200 mm Bumper beam: 4100 x 900 x 500 mm Control cabinet: 1200 x 300 x 1050 mm Fan: 700 x 7500 x 1300 mm Filter: 1300 x 900 x 2800 mm compressor with dryer: 2100 x 500 x 1000 mm

General SKU001A015 Makeunknown Mounted on legscheck Main Features MaterialStainless steel Volume1000 Ltr. Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Closed stirring vessel(1x) Capacity± 1000 Ltr Vessel sizesdia. 1200x800mm Dished bottomcheck Dished top sidecheck With covercheck Top connections(12x) Outletcheck Half coil jacketedcheck With paddle stirrercheck Motorcheck Information LocationBarneveld Floorspace1,4x1,4 M Total height3,5 MDiscountStirring vessels-DiscountStirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU076Y588 MakeDynamit Nobel AG No.1025 Year of construction1982 LocationBarneveld Pressure Working pressure1 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume1040 Ltr. Motor5 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity1040 Ltr Vessel sizesdia. 1000x1050mm Dished bottomcheck Dished top sidecheck Manhole/hand hole dia. 200mm Top connectionsdia. 100mm + 4x dia. 50mm Outletdia. 100mm With jacket(205 Ltr) Max. temperature120 Degr. C., With blade stir. Ekato,EM-080 Motor5,0 KW, 380 Volt (Ex) with variable speed dr. Information Floorspace1,4x1,4 M Total height3,9 M ATEX compatiblecheckDiscountStirring vesselsDynamit NobelDiscountStirring vessels > Stirring vesselsBrand > Dynamit Nobel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis FERMAT VMF 1000 vertical machining centre was manufactured in 2008. It features a table size of 1300 x 600 mm and a maximum table load capacity of 800 kg. The machine offers impressive X, Y, and Z-axis travels of 1000 mm, 600 mm, and 570 mm, respectively. If you are looking to get high-quality machining capabilities, consider the FERMAT VMF 1000 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2980 ( 800 + 1275 + 1005 ) Nominal / outside ...

A Gernep cold glue and self-adhesive labeling machine for spirits is available. Nominal capacity: 12000bottles/h, direction of operation: RM, control range: 3000-18000bottles/h, bottle format volume: 700ml/750ml/1000ml, bottle material: glass. Including two cold glue units, two self-adhesive dispensers, cold glue unit height adjustment, diameter adjustment slide, breakage detection, bottle counter, side cam alignment, dating unit and Etima neck ring preparation. Documentation available. An on-site inspection is possible.

A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 € : 148.61 € : 80 to : horizontal verschiebbar : 250 mm : 1040 mm : 865 mm : 200x120 mm : 5 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0151 : 217 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Floor-standing unit approx. 100l capacity Stainless steel version with agitator with boiler tilting device with outlet tap double-walled, with thermal oil/electric heater Heating 50 - 200°C

sheet width: 1050 mm plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm distance between columns: 1200 mm blade length: 1150 mm no. of strokes: 46 - 69 Hub/min cutting angle: 1.30 ° Control: konv. oil volume: 100 ltr. total power requirement: 5.68 kW weight: 1100 kg From a maintenance workshop In good condition () Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge Backlash-free ball screw for backgauge Travel speed 100 mm/sec - Electric cutting length limiter Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) The data for this ad was created with ModulMWS - the softwa ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : 1000 mm : 300 mm : 11 kW : 2110 mm : 1000 mm : 2450 mm : 2400 kg : 1 : 610 mm : 1020 mm : 5 mm/s : 10 mm/s : 8 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13200 € : 253.44 € : 100 to : horizontal verschiebbar : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2560 mm : 1000 mm : 2480 mm : 1755 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 115600 € : 2184.84 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning lengt ...

: neu : Bulgarien : 127060 € : 2401.43 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 240 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 112 010,00 ...