130,501 used machines on RESALE, but how to find them? Machine Search
Key data: 1000 kN
Arburg 470H 1000-400 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 100 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubricat ...
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...
Used Used Filler Borelli 1.100 bph: Year: 2023 Condition: As Is Model: RM Year: 2023 Speed: 1100 BPH Direction of rotation: clockwise Type of bottle: glass bottle 8 valves Type of filling: gravity Dearation system Safety protections Code: T 209 More details: https://bottlingscout.com
Used Used labeller Bmc 1000 A1: Year: 2001 Condition: Good Used Labeller BMC Year: 2001 Speed: 1.000 Bph Model: 1000 A1 Direction: Linear Single adhesive station Application: front and Back label Safety protections Code: EA 580 More details: https://bottlingscout.com
Used Used Wirehooder Minerva 108: Year: 2007 Condition: As Is Used Wirehooder: Model: Minerva 108 Year: 2007 Speed: 2.800 BPH Direction: Clockwise Single head Type of cage: 4-wire Distributor cage with long autonomy Safety protections Code: HJ 81 More details: https://bottlingscout.com
Dispositif à tronçonner pour broche Schaublin 102 - Type F. Etat neuf, jamais utilisé, avec des traces de stockage. Für Spindel Schaublin 102 - Typ F. Zustand: neu, nie gebraucht, mit Lagerspuren.
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Siemens Sinumerick 840D Total hours: 12,058 h Operating hours: 5,039 h Worktable length: 1200 mm Worktable width: 5 Spindle rotation: 8000 1/min Number of axes: 3 X-axis travel: 1035 mm Y-axis travel: 560 mm Z-axis travel: 510 mm
Homogenizing Mixer Manufacturer: Becomix Type RW 1000 CD Capacity 1000 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 1000 liter pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells
Homogenizing Mixer Manufacturer: Becomix Type RW 1000 CD Capacity 1000 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 1000 liter pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells
TECHNICAL SPECIFICATIONS Description: Cement silos / building material silos Number of silos: 3 pcs. Version: 2 x single chamber / 1 x double chamber silo Capacity: 3 x 100 tons. Number of screw conveyors: 4 pcs. SPECIFIC COMMENT - Also available individually - Incl. pneumatic compressed air filling - Incl. dedusting filter
1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.
Cylinder 63/28/630 ORSTA TGL 10906/7 W 63 mm Shaft 40 mm. Stroke 630 mm. M22 x 1.5 thread. D hole 40 mm. Length one 85 cm 2 x M22 x 1.5 mm Pressure 165 bar All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk
W&P rack oven type REC 1020 Year of construction 02/2017 (test laboratory) NAVIGO control Gas burners Ramp Hood
Belt spiral mixer with 1,000 l. gross capacity, equipped with 2 cutter heads (4.0 kW / 2,885 rpm each). Drive belt coil via roller chain. Incl. base frame, without motor and chain (necessary data can be provided). Neat condition.
The machine is in very good technical condition, testing is possible by prior arrangement.
Year of manufacture 2004 for 5 - 10 litre containers Clamping force: 100 kN Wall thickness control: 64 points Max. product diameter: 115 mm Cavities: 1 x 3 Center distance: 125 mm Machine is in good condition, and available immediately
Control Mazak Mazatrol SmoothAi Rotary diameter. [mm] 600 Turning length [mm] 850 General: Control Mazak Mazatrol SmoothAi Processing diameter max. 600 mm Processing length max. 850 mm Main spindle: Motor spindle technology Speed 6,000 rpm Power 11 kW Torque max. 184 Nm Bar passage 51 mm C-axis 0.0001° Chuck 3-jaw chuck Clamping Cylinder Hollow Clamping Cylinder Sub-spindle: Motor spindle technology Speed 6,000 rpm Power 11 kW Torque max. 184 Nm Bar passage 51 mm C-axis 0.0001° Tailstock function: Yes Tool carrier (X/Y/Z/B): Technology Travelling column with milling spindle X-axis 535 mm Y-axis 210 mm Z-axis 900 mm B-axis -30° / +210° Milling spindle speed 20,000 rpm Power 24 kW Tool magazine: Technology Shelf Magazine Number of stations 250 Tool Changer Double Gripper Equipment / Accessories: Chip disposal chip conveyor Coolant suppl ...
• Year of manufacture: 2020, • Operating hours: about 2,200 h, • Rotor: Diameter 860 mm, Width 830 mm, • Drive: Direct drive via coupling, • Crusher box: 4 impact bars, 2 impact plates, • Rear leg unit (in RS): 2.44 m × 1.2 m (8 × 4) with oversize backfeed, • Task opening: 860 mm × 720 mm, • Transport weight: approx. 30 t, • Application: concrete, asphalt, construction debris and natural stone, Task funnel, • Hopper capacity: 2.6 m³, • Task height: 3.0 m, • Width at the back: 2.0 m, • Sieve area: 1,080 × 810 mm, • Year of construction: 2020, • Operating hours: approx. 2,200 h, • Drive: Direct drive via clutch, • Crusher box: 4 strike bars, 2 impact plates, • Transport weight: approx. 30 t, • Funnel capacity: 2,6 m³, • Task height: 3,0 m, • sieve surface: 1.080 × 810 mm
This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a HYBRIDE 10+5 drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine.
Manufacturer: Gur Is Model: TY-1050 MT Year of Manufacture: 2020 Machine Type : Bagmaking Machine Condition: Good working condition, currently in production Materials and Film Specifications - Film types: LDPE, HDPE, recycled film extracts - Film thickness: 20 to 100 micron PE film Production Specifications - Sealing width (bag length): up to 1050 mm - Draw length (bag width): 80 to 600 mm - Linear speed: up to 300 m/min - Output: up to 200 bags per minute Bag Types Produced - Patch handle bags with handle cut-off - Safety bags - Side weld and bottom seal bags - Bottom gusset bags - Open and closed lip bags - Round bottom bags - Header seal bags Drive and Control System - Control: PLC with operator interface terminal - Drive: servo motor driven input nip rollers and sealing bar - Print registration: photocell print registration control included Attachments and Accessories In ...
This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine.
s/s-style, adjusted for filling and closing of vials/bottles 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts Output max. 3,000 objects/h according to product Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps Drip retraction 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm 2 sets dosing needles, each 2 pcs, several dia PLC Klöckner Möller PS4-201-MM1, touchscreen Eectr. connection 220/380V/50Hz
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 m total power requirement: 300 kW weight of the machine ca.: 280 t dimensions of the machine ca.: 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the sell ...
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
through-put width: - mm working heigth: - mm : - serial number: 2044 total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. -Reitstock mit Feinverstellung -Inn ...
internal diameter: - mm grinding depth: - mm swing diameter: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: - mm grinding depth: - mm swing diameter: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...
max. wheel diameter: 1000 mm gear width: 200 mm max. module: 10 min. module: 0,5 max. dia. of teeth cutting: 1000 mm min. dia. of teeth cutting: 75 mm table diameter: 1000 mm boring diameter: 400 mm spindle stroke: 0 - 230 mm stroke position adjustment: 250 mm distance between table / ram: 480 / 730 mm dia. of shaper cutter: 8 Zoll taper: Morse 5 tool taper: 1 3/4 Zoll total power requirement: ca. 20 kW weight of the machine ca.: 11 t Standard version - Chip conveyor - Two additional tables with diameters of 850 mm and 1,500 mm - Several cutting tools - Set of interchangeable gears - Program for cutting in 1-2-3-4 passes/cycles - Program for spiral cutting - Several holders and clamps for workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 4770 mm swing diameter: 10000 mm turning height: 3500 mm table load: 100 t turning speeds: 40 U/min table drive: 125 kW Control: Siemens type: 840 D Rest: 1 slide adjustment: 1421 mm ram head dimension: 250x250 mm inclination: +/-30 ° live tooling: 16 Kw spindle taper ISO: 50 spindle turning speed range: 3000 U/min chip conveyor: total power requirement: 150 kW weight of the machine ca.: t dimensions of the machine ca.: m Machiney Refurbished 2003 Table extension up to 8000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, ...
ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect
Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1540, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone ...
spindle diameter: - mm x-travel: 1600 mm y-travel: - mm total power requirement: - kW weight of the machine ca.: 13,7 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Máquina destroqueladora para el pelado del trabajo de troquelado de forma automática. No es necesario tener moldes para la operación, operando con pines que se seleccionan de forma sencilla en la preparación del trabajo. Formato máximo de pliego: 1080x780 mm Tamaño máximo destroquelado: 440 x 420 mm
Various stackable IBC containers with lid and bottom outlet valve. Available stock by manufacturer: - 3 pcs. Thyssen - 5 pcs. Stöcklin
- CNC wireless remote control - Zero-3 / 5-channel stepper motor drive - Base frame (movable on wheels) - Dell PC (with monitor, keyboard, and mouse) - WinPC-NC USB software (Version 2.50) - Accessories
Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details.
Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details.
This 4-axis WEMAS VZ 1000 vertical machining center was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 610 mm, and Z-axis travel of 660 mm. The machine includes a robust table size of 1300 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1000 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.
x-travel: 410 mm y-travel: 570 mm z-travel: 140 mm control: Mazatrol Matrix Maximum working diameter: 545 mm Maximum working length: 519 mm main spindle speed: 35 - 6000 U/min tool taper: Capto C6 rapid traverse y/x/z axis: 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 r ...
pressure: 100 t table length: 1800 mm table width: 1550 mm table travel: 2000 mm dayligth: 1800 mm total power requirement: 19,5 KVA weight of the machine ca.: 22 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
