beckhoff p 10 used for sale

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintance, 13Kw motors, highshear overhauled 2017, level detection, 50mm discharge pipe, 3Ph

Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt, belt conveyor -Speed: 6 m/min -Conveyor belt width: 130 mm -Conveyor belt length: 1020 mm -Motor/Transmission: 0.18 kW -Dimensions: 1020/335/H285 mm -Weight: 19 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt roller: Transport roller -Roll: Ø 100 x 1800 mm -Shaft: Ø 23 x 200 mm -Quantity: 3x transport rollers available -Price: per piece -Dimensions: Ø 100 x 2200 mm -Weight: 13 kg/pc.

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines for: noise dampening and absorption of small vibrations -Size: DN 100 -Number: 2x available -Price: per piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T slots: 16 mm

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg

Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg

Hoe, transport wagon -Material: entirely made of 4301 stainless steel -Dimensions: 1100/1000/H780 mm -Intermediate dimension: 85 mm -Weight: 41 kg

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Waste oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg

Power trowel, concrete trowel, screed trowel -without a flat iron -Weight: 60 kg

Replacement motor for geared motor, electric motor, three-phase motor -Speed: 1400 rpm -Power: 2.8 kW -Design: B14 -Brake -Shaft diameter: 20 mm toothed -Protection class: IP 54 -Weight: 35 kg

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

adjustable gearbox, variable speed gearbox -adjustable -Design: B5 -Angle gear ratio: 1:15 -Inlet shaft diameter: 19 mm -Output shaft diameter: 25 mm hollow shaft -Weight: 26 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 460/310/H160 mm -Weight: 50 kg

We offer you a sand classifier / sand separator from MEVA. - Type: SKS 100 E - Year of construction: 2003 - Integrated ventilation

bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power: 4 kW -U: 400 VAC -F: 25 kHz -I: 10 A Ac -P: 4 kW -Dimensions: 130/350/H210 mm -Weight: 7 kg

Contactor, semiconductor contactor, contactor -Type: B 105 -Power: 220 V AC 22 kW -Quantity: 3 pieces available -Price: per piece -Weight per package: 3 kg

System for filling 10 liter PET canisters. The canisters are filled onto two platform scales. Automatic fine weighing and shutdown. Compressed air operated

NH fuse switch disconnector -660 V AC VDE 0660 -IEC 408 AC 23/500 V -Dimensions: 100/670/H280 mm -Weight: 8 kg

Reflective light barrier, light barrier -10-30 V DC 100 mA -Range: 20-130mm Price: per piece -Quantity: 4x Available -Weight: 0.2 kg

Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile shelving unit, tray trolley, embroidery trolley -Width: 1010 mm -Depth: 690 mm -Height: 1600 mm -Number of subjects: 36 -Material: Stainless steel -Sheet width: 460 mm -Quantity: 1 piece available -Weight: 45 kg

Machine type: Vacuum dough divider Model: VD 100-700 The dough dividing machine is the latest system of dough processing technology Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW

grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 90 l/min tank contens: 100 l voltage: 220 / 380 V tank dimensions ca.: 800 x 380 x 400 mm height with motor ca.: 900 mm power capacity: 2,2 kW weight: 57 kg Condition: unchecked: Base: 820 x 390 x 650 mm The capacity liter is estimated because on the type of the motor is model KMR 90 L 4. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor, electric motor -Speed: 30 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Dimensions: 1000/600/H400 mm -Groove: 45 mm -Weight: 700 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

Brand: Bassra Type: BMT-1000 Kind: Butyl Extruder Max speed: 1k/per min. Output Capacity 30kg. Hopper capacity 3 temperature controls Digital readout of temperature zones Programmable temperature controllers Progressive kit heating funnel 3 meter hose Positive displacement gear pump Undertemperature on all zones Miniature circuit breaker Photos/film available: Photos available Other: Gun is missing 11.1.180

Folding bench, continuous segment 100 mm high, for U-profiles, without backgauge, Colour: blue, upper bolster stroke: 50 mm, without roller shears, bending angle: 145 degrees

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise dampening and absorption of small vibrations -Size: DN100 -Nominal pressure: 6 bar -Width: 550 mm -Weight: 17.5 kg

workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 A guide channel, size of approx. 60 mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise reduction and absorption of small vibrations -Size: DN100 -Width: 320 mm -Weight: 9.8 kg

Vibration damper, compensator, damper -Installation: on pumps, compressors, valves -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel -Clear diameter: 240 mm -Width: 390 mm -Number: 2x dampers available -Price: per piece -Weight: 15.2 kg/piece

KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running Direction: Right – Left This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production  ...

- CP 2000 (incl. ink remote control) - Preset Feeder - ALCOLOR dampening units - Technotrans Combi cooling device (water cooled) - ink temerature control - HEIDELBERG Autoplate - Standard Wash-up systems - GRAPHIX Alphatronic 200 - high pile delivery - Perfecting 2/0 or 1/1 - machine raised by 30 cm

KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running direction: left - right This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production vo ...

Klöckner-Moeller Track System BD O-100 A Klöckner-Moeller Busbar system BD O-100 A 500 V Track 160 cm 120 pieces 192 meters More items - new and used - can be found in our shop! International shipping costs on request!

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 10 bar -Quantity: 6 available Price: per package -Weight: 0.5 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 4 bar -Quantity: 6 available Price: per package -Weight: 0.6 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 6 bar -Quantity: 2 available Price: per package -Weight: 0.6 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 2.5 bar -Quantity: 2 available Price: per package -Weight: 1 kg