beckhoff p 10 used for sale

Fully automatic Saddle stitcher Configuration: Fully automatic from feeder to trimmer • 1 cover folder feeder • 1 horizontal sheet feeder • 6 vertical sheet feeders • Control panel with main operating point • Stitching machine with wire feed gear • Trimmer with trimmer feed • Compensating stacker RIMA RS-14 Technical specifications: Maximum format untrimmed 320 - 350 x 460 mm Maximum trimmed format 340 x 450 mm Maximum cutting thickness (single use) 12 mm cutting thickness (double use) 1/2x punch knife width Maximum staple thickness 6 mm Maximum trimming front trimming 50 mm Maximum trimming head and foot trimming 50 mm Stitching heads max. 4 Hohner narrow stitching heads staple length of the vertical feeders approx. 250 mm (depending on the paper) Arch opening vacuum suction cups at least 6 mm rear fold, 8 mm front fold, Sheet opening gripper max. 20  ...

; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Specifications Type: SDJ 1000/1600 Year of construction: 2014 Lifting capacity: 1000 kg lifting height: 1600 mm Mast height, lowered: 2080 mm Mast height, raised: 2080 mm Total weight: 214 kg Directly from the customer used from November from CH-Pratteln available.

capacity 250 Kg

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine Details Warehouse number 1105-03727 Machine Type Machining Center - Vertical Make YANG EAGLE Type MCV 1000 Year of construction 1998 Control type CNC Control Fanuc O-MD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1015 mm y-travel 500 mm z-travel 500 mm Control Fanuc O-MD Clamping surface table 1070x500 mm Table load - central/maximum approx. 250 kg Tool holder BT 40 Spindle speed: 24...6000 rpm Operating hours 5617 h Tool magazine with 20 seats/places Total power requirement 12 kW Information Equipment: CNC FANUC OMD -Cooling device BT 40 Copy of user manual available! Machine can be demonstrated! I.d..

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

We offer you an agitator (waste water technology) from the company Højmark. - Model RVPG S 100 - Power: 4 KW - Wings are made of stainless steel - Speed 1500 min/-1 - Slow running The prices include VAT (VAT can be demonstrated) and are non-binding If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. GTC Trade & Service Inh. M. Schönau Halbmondsweg 3 99885 Ohrdruf, Germany

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, braking resistor -Type: 100 Ohm 0.6 kW -Dimensions: 640/90/H115 mm -Weight: 3.2 kg

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand:-Siemens Model: Simatic S5-100U Programmable logic controller Siemens Simatic S5-100U If you have any questions, please do not hesitate to contact us, Yours sincerely,

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 106/45-5 -Number: 2 pieces available -Price: per piece -Dimensions: 100/85/H115 mm -Weight: 3,6 kg

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 20 mm/M16 -Stroke: 100 mm -Cylinder tube outside Ø 40 mm -Total length retracted: 280 mm -Admission: hole Ø 20 mm -Dimensions: 280/40/H60 mm -Weight: 2.2 kg

Alignment ruler, alignment rail, steel ruler -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Jungheinrich, forklift drive wheel -Wheel size: Ø 310 x 105 mm -Pitch circle: Ø 113/18 mm -Weight: 13.2 kg

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Wicke- Elastic heavy duty bike -Wheel size: Ø 270/105-225 mm -Hole circle: Ø 188/9 mm -Price: per piece -Number: 1 piece -Weight: 8.9 kg/piece

Very robust and compact 1-fold eyelet machine, electric table unit in top condition. Designed for 5.5 mm eyelets. Stock goods, immediately available.

Sensor, probe, immersion probe -Manufacturer: KFG Level, magnetic level sensor -Type: KA-10310/3 -Dimensions: 215/150/H75 mm -Weight: 0.4 kg

Diesel tank system - company filling station - consisting of: 1 x Storage container, 10.000 liter capacity, used 1 x fuel pump, type Eco 75, brand new Description container: according to DIN 6616-D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome cover, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is reprimed and painted on the outside. (RAL sound). L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex wo ...

Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...

Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available -Dimensions box: 265/145/H30 mm -Total weight: 0.7 kg

Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Accessories: see photo -other sizes: available -Dimensions box: 265/125/H25 mm -Total weight: 0.8 kg

Cam switches, circuit breakers, motor protection switches, step switches, rotary switches -Type: WAA477/100 VZ -Voltage: AC-3 kW 3 ph 380 V/440 V 125 A -Dimensions: 330/95/H130 mm -Weight 2.3 kg

Milling machine MACMOM M 100, year of construction 1970. Without table. At call.

Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...

Dreh-Øüber Bett: 320 mm Dreh-Øüber Support: 185 mm turning length: 1000 mm Spindelbohrungs -Ø/ Aufnahme: 32 mm mm spindle turning speed range: (12) 85 - 2000 U/min feeds - longitudinal: 0,006 - 1,77 mm/min feeds - cross: 0,003 - 0,888 mm/min thread - mm pitch: 0,1 - 28 mm thread - module: 0,1 - 1,75 mm thread - inch: 2,5 - 75 inch. voltage: 400 V / 50 Hz power capacity: 2,2 kW weight of the machine ca.: 0.8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 28 x 57 mm -Construction: B5 -Protection class: IP 55 -Price: per piece -Number: 1 Stück -Dimensions: 365/273/H250 mm -Weight: 20 kg/piece

Heidelberg Stitchmaster ST 100 Year of construction.: 2004 6 Investors 1x Turnaround feeder Trimmers with central groove Stacker

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, hydraulic pump A10 TGL 10859 -Motor: VEM 3 kW/1430 rpm -Dimensions: 515/250/H265 mm -Weight: 43 kg

properties: Used belt conveyors curve 90° Transnorm Condition: Fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. motor 0,55Kw and side guide Feet to be ordered separately Color: Silver/ Yellow 1 pc in stock specifications: Dimensions of the belt conveyor curve 90° Type: 1600-105 Total outer width: 1,820 mm Total width inside: 750mm Total width incl., motor: 870mm Curve angle: approx. 90° degrees Belt width: 500mm Strap Type: Gripp Frame height: 220mm Material: Aluminum / Steel Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, Schraegfoerderer or telescopes for loading and unloading your goods, we ar ...

-Model UW-105-0 -Serial number: 86.131.711 -380 volts -13.7 kW Dimensions: 64x72x190cm (WxDxH)

Three-phase motor with 2 speeds, electric motor -Power: 2.7/3.3 kW -Speed: 1420/2850 rpm -Design: B5 -pole-reversible -Protection class: IP 54 -Dimensions: 355/250/H200 mm -Weight: 27 kg

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Temperature sensors, resistance thermometers, thermometers, thermocouples -Thermocouple: LC-05, unused Ovp -Type: LC-05/NI-100 D DM -Number: 6x available -Price: per piece -Dimension packaging: 150/20/H20 mm -Weight: 0.1 kg/piece

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, caster, pallet truck castors -Manufacturer: Wheels-Vogel, heavy-duty bike -Wheel size: Ø 85 x 100 mm -Inside: Ø approx. 25.5 mm -Weight: 1.3 kg

Machine Details Stock number 1105-03787 Machine type machining center - vertical Make TRENS Type MC 100 VA Year of construction 2000 Control type CNC Control HEIDENHAIN TNC 415 Storage location FRANCE Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 1015 mm y-travel 610 mm z-travel 508 mm Table size 1080 x 580 mm Spindle holder ISO 40 Drilling capacity in St 60 - solid drilling 45 mm Tapping up to M 24 Speed range - infinitely variable 20 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Spindle/table distance 100 - 608 mm Number of tool magazine slots 40 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 125 mm Tool length max. 380 mm Tool weight max. 7 kg Tool change time 7 sec Spindle 11/16.5 kW Control HEIDE ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Recordings: Ø20 x 22 mm -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm -Weight: 5.7 kg

electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: IDM 100/30.6013/2 -Power: 40 W -Speed: 1380 rpm -Shaft: Ø 9 x 8 mm -Design: B5 -Protection class: IP 22 -Dimensions: 165/135/H160 mm -Weight: 4 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: KR 100, 1/4 -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 345/200 / H230 mm -Weight: 29 kg

DALEX 50Hz AC welding transformer 100kVA Rated Power: 100kVA/50%ED Voltage Prim.: 380V50Hz Voltage sec.: 8.2V Weight: 165kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 212.20.100 1.6 bar -Screw connection: G1/2 B below -Dimension box: 140/110/H60 mm -Weight: 0.6 kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: Hasco, high-performance cartridge heater -Item No.: 277202 10 x 100 mm -Power: 400W 220V -Dimensions cartridge: O 10 x 100 mm -Weight: 0.1kg

Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German