126,721 used machines on RESALE, but how to find them? Machine Search
Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter
Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 Liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe connection NW50 with butterfly valve
Storage tanks outside marbled for wine, water, fruit juice, schnapps 2.100 liter UNI-NIED Measurement and Weight: Total Height: 2100 mm Length: 1950 mm Width: 650 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection for level indicator with bar and scale With zapf clape gr. 37 Lower bottom: With flat bottom With outlet pipe pulled forward NW 50 with butterfly valve
Henkellikator COMAG Power 100 + 100 Pack/min The machine is double lane
all stainless steel max. load 1.000 kg (depending on the product) with new control Variotronic with new vacuum pump Busch 63m³ 3 speed engine : 1 / 2,8 / 3,4 rp/min dimensions (l x dpt x h) : ± 2.080 x 1.560 x 1.920 mm
500 Heavy Duty Grating 100 x 100 cm Used goods, very good condition, see pictures hot-dip galvanized Weight load: approx. 450 kg/m² Dimensions: 1000 x 1000 mm Mesh size: 20 x 30 mm Bearing rod height: 45 mm Material thickness bearing rod: 3 mm Negotiation price: € 45,- net per piece from stock Larger quantities on request! Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
300 Heavy Duty Grating 100 x 141 cm Used goods, very good condition, see pictures hot-dip galvanized Weight load: approx. 450 kg/m² Dimensions: 1000 x 1410 mm Mesh size: 20 x 30 mm Bearing rod height: 45 mm Material thickness bearing rod: 3 mm Bearing bar over long side (1410 mm) Negotiation price: € 64,- net per piece from stock Larger quantities on request! Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
NEW JOB CENTER! 480 HOURS TO POWER ON! COURSE AXIS X MM 1,000 COURSE ASSE Y MM 550 COURSE ASSE Z MM 500 TAVOLA DIMENSIONS MM 1.100x502 TAVOLA PLAN: 130-630 MM MAXIMUM LOAD ALLOWED: 700 KG ATTACK: BT40 GIRI/MIN VELOCITY SPEED 12,000 TOOL WAREHOUSE: 24 FANUC CONTROL 0i-MF COMPLETE OF TAVOLA 4/5th ASSE LEHMANN SOO EDITION 3
Stock# UG6276 Used vertical disc agitator/dissolver by Test SA (PL) type MP-11/1000Ex. Machine can work on 1000 l mixing pans and is equipped with disc agitator. Driven by motor 11 kW, 1440 rpm. Working rotation of agitator adjusted in range from 0-1000 rpm. Mechanical rising and lowering of agitator up to height 1250 mm. Dimensions: H 3180 mm x W 800 mm x L 1200 mm. Ex proof design - ExII2GcIIBT3. Includes technical documentation. New 2014. Mixing pan not included.
Used Ciat LDC 100V EVO R410A air-cooled chiller on R410A built in 2016. Complete with 1 Copeland ZP120KCE-TFD-455 scroll compressor, condenser with 1 EBM-Papst A8D800-A101-05 fan - 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm and a total airflow of 16.700 m³/h, brazed heat exchanger as evaporator, Wilo MHIL502-E-3-400-50-2 water pump, expansion vessel, control cabinet with a Ciat Connect2 controller and a Schneider Electric VW3A4422. Specifications: Brand: Ciat Type: LDC 100V EVO R410A Product type: Air cooled chiller Capacity kW: 26,3 kW Capacity tons: 7,5 Tons Refrigerant: Freon Refrigerant type: R410A Weight: 388 kg Dimensions: 2050x1060x1500 mm (LxWxH) Compressors type: 1 Copeland ZP120KCE-TFD-455 Display: Ciat Connect2 Number of fans: 1 Fan specifications: 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm Amount in stock: 1
Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t
Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours
This Rational UltraVent hood for Rational combi steamers, built in 01/2018 including connection kit, fits for the combi steamers CMP, SCC 61/101 gas from 2011 to the present ( index H+I ). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 4066 € net. The article is subject to the special regulation for used equipment: margin taxation according to § 25 a UStG. Our used equipment service for you: •6 months warranty on all electrical parts •Professional overhaul / inspection & expert cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected •Competent advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal This UltraVent hood has the patented condensati ...
Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.
Scale with conveyor belt Brand Sartorius Built in 2006 Type: WM6FDP-1000Q Up to 6 kg Conveyor belt speed: 15-36 m/min Bandwidth: 300mm - Calculation and display of weight values (RS-232C) - 100 product storage - Fixed weight values in dynam. Operation - TCP | IP, RS-422 and RS-485 can be used via external cartridges
Key data: 100 KW, 125 kVA, 400 V
MODEL: EQ-BG125100 ENGINE: WP6D132E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 1085kg DIMENSIONS L/W/HEIGHT (MM): 25329501365 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your d ...
Key data: 1000 KW, 1250 kVA, 400 V
ENGINE: Cummins KTA38-G9 FREQUENCY (HZ): 50 VOLTAGE (V): 400/230 POWER: 1250kVa / 1000kW STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 8200kg DIMENSIONS L/W/HEIGHT (MM): 445018502350 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full add ...
TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm
Storage Tank / Flat Bottom Tank with Outlet Discharge 20.100 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 3700 mm Height: 4000 mm weight: approx.. 1,5 tons
Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)
BOEHRINGER VDF DUS 1000 CNC lathe was built in 1993 in Germany. The machine, designed for machining workpieces with a maximum diameter of 1000 mm, delivers excellent turning results during even the most intensive challenges, thanks to its extremely stable design and reliable components. The spindle is driven by an stepless AC motor, which allows efficient turning in two different, optimally adapted speed ranges. All axes, on the other hand, have powerful servo drives, guaranteeing excellent dynamics and positioning accuracy throughout the machine’s lifetime. This is rounded off by an intuitive SIEMENS CNC control with many functions for easy operation and programming. The BOEHRINGER VDF 1000 DUS lathe weighs approximately 10100 kg. Technical specifications of BOEHRINGER VDF DUS 1000 metal lathe - turning diameter above the bed: 1000 mm - turning diameter over transverse slide: 710 ...
Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.
Dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry They can be banded and spiral The spiral rounder uses a spiral to shape the dough The machine shapes the dough thanks to the aluminum cone and aluminum sleeves around which it spirals The dough that comes from the dough compartment falls into the aluminum inlet groove All surfaces over which the dough moves are coated with Teflon Thanks to the system with flour and optional blowing of hot or cold air on the grooves, the dough does not stick to the drum Working range: 100 - 800 gr Dimensions: 950 x 950 x 1520 mm Weight: 175kg Electrical power: 1.1kW
Mathis THN 10988 Laboratory Thermosal Plant Use This foulard-dryer combination has proven itself excellently in practice. It is used in this way for a wide variety of hot air treatment processes such as drying, fixing, condensing, thermo-isolating, etc This system is used wherever a certain sample size is already required, for example to produce sample collections or the like. Dryer THA If the foulard and dryer are to be used separately in addition to continuous operation, the THA type dryer should be chosen. Attached to this device are a unwinding unit at the dryer entrance and a pull-out unit at its exit. This element determines the speed of goods in individual operations. This offers the advantage of using the foulard and dryer independently and at the same time. For drying, fixing, condensing, etc., the goods are then put on the dryer. If all the previously listed ap ...
approx. 4x belt conveyors, transnorm, approx. 1m long – used - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos1+2+21+22 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor / Type: 1600-105 Year of Make: 1996 Element length: 100cm Element width: approx. 50cm Strap width: approx. 40cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony
Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order
electric box lifting device, lift lift Brand: KLB Type: Lifter 1000 Built: 2013 Load capacity: 2000N, approx. 200kg maximum lifting height: 102 cm Crate dimensions: 62 x 62 cm Trolley with spindle drive Forks to hang in Cable for power supply Control panel with cable This item is only sold to traders. All information without guarantee
Measuring Machine in Excellent Condition Available Immediately The Dr. Heinrich SKM 1000p 3D Multi-Sensor Measuring Machine offers precise measurement technology and versatile applications. Technical Specifications: X-Y: 1000 x 400 mm Z: 300 mm Max. Workpiece Weight: 100 kg 3D Measurement and Analysis Software SAPHIR with features such as: CAD import Graphical representation Programmed learning Target/actual comparison Power Supply: 220-240V, 50-60Hz This high-precision machine is in excellent technical condition. A functionality video can be provided via WhatsApp upon request. Shipping: Nationwide shipping within Germany via freight carrier is possible on short notice. If you have any questions, feel free to write or call: (+49) 160 96679844 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg
Vessel for Melting Manufacturer BINDER 1000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available (from 2008)!
Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg
7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc
Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293
conus taper: HSK 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting effort 1000t the number of strokes (no load) 17 /min course a support of the blades 140mm Max. cutting diameter of rounded workpiece, mm 190 Max. cutting diameter of squared workpiece, mm 180 for 450 N/mm2. Machine weight, kg 60000
Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.
Used machine with 110 KW as a retro-fit machine We are also happy to work on your Stephan machine as in the pictures in the appendix as retro-fit
Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.
Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel
General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine ...
Clocked working machine for fully automatic sealing of round, flat and mould objects made of glass, plastic or metal with up to two different types of closure. Rubber plugs, drip inserts, screw and pilferproof and flange caps can be easily machined. Power: up to 4200 units/h.
Extinguishing water tank Extinguishing water tank 100,000 litres steel tank, earth tank can be used as extinguishing water retaining tanks, Sports field irrigation, rain retention tanks, cisterns, etc. Factory new Dimensions: D = 2.90 m - L = approx. 16.00 m On request, the container can be fully equipped with a fire-fighting water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A, with Storz A-fixed coupling and Storz A-blind coupling, - 1 pc. vent pipe DN100 with stainless steel hood - V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Extinguishing water colle ...
Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION
PART NUMBER: 7547 Specifications: - Track width 300mm - working width of the shaft 290mm - max disc diameter 300mm - blade bore diameter 70mm - max cutting height 100mm - width of the table top with extension 680mm - table top length 1630mm -in advance: - 2 rows of ratchets - Slip roller, metal, pressure roller - shaft with saws - 2 smooth metal sliding rollers, pressure roller - from below: - guide strip -Triggers -caterpillar - electric body adjustment up/down - central lubrication of the track - 2 types of feed speeds - feed motor 1.1kW - main motor 22kW - extraction spigot diameter 130mm - total dimensions length/width/height 2000x1400x1700mm - weight about 900kg ADVANTAGES – Italian production – very good condition – used multi-rip saw Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change w ...
PART NUMBER: 7545 Specifications: - Track width 250mm - shaft width 220mm - max disc diameter 300mm - blade hole diameter 60mm - cutting height 100mm - table top width 650mm - table top length 1460mm –in advance: - 2 rows of ratchets - smooth sliding shaft - shaft with saws - smooth, sliding shaft – from below: -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - central lubrication - feed motor 1.2kW - main motor 21kW - extraction spigot diameter 180mm - total dimensions length/width/height 1700x1450x1500mm - weight about 1800kg ADVANTAGES – Italian production – DTR documentation – a solid machine – used multirip saw, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)
Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN ...
PART NUMBER: 7544 Specifications: - Track width 250mm - working width of the shaft 220mm - max disc diameter 300mm - blade hole diameter 60mm - max cutting height 100mm - width of the table top with extension 560mm - table top length 1580mm –in advance: - ratchets 2 rows - Slip roller, metal, pressure roller - shaft with saws - smooth, metal, slip roller – from below: - slip roller - guide strip -Triggers -caterpillar - central lubrication of the track - smooth speed control on the inverter - feed motor 1.5kW - main engine 15kW - extraction spigot diameter 170mm - total dimensions length/width/height 1950x1500x1600mm - weight about 1800kg ADVANTAGES – Italian production – central lubrication of the track – very good condition – used multi-rip saw Net price: 33900 PLN Net price: 7884 EUR depending on the price of 4.30 EUR (Pric ...
; Gross weight [kg]: 2960; Engine: Deutz TCD4.1L4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100
: 1050 mm : 600 mm : 600 mm : 1200x600 mm : ISO 40 : 12.000 U/min Motor Capacity: 7,0/10,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
