bearings used for sale

Deep groove ball bearings, ball bearings, single row deep groove ball bearings SKF 6319/C3 Inner diameter: Ø 95 mm outer diameter: Ø 200 mm height: 45 mm New ! Dimensions ( single bearing ): 200 x 200 x 45 mm Dimensions ( packaging ): 220 x 210 x 60 mm

Deep groove ball bearings, ball bearings, single row deep groove ball bearings SKF 6322/C3 Inner diameter: Ø 110 mm outer diameter: Ø 240 mm height: 50 mm New ! Dimensions ( single bearing ): 240 x 240 x 50 mm Dimensions ( packaging ): 255 x 250 x 60 mm

Deep groove ball bearings, ball bearings, single row deep groove ball bearings, 8 pieces ROLLWAY 6308C3 Inner diameter: Ø 40 mm outer diameter: Ø 90 mm height: 23 mm New ! Dimensions ( single bearing ): 90 x 90 x 23 mm Dimensions ( packaging ): 190 x 95 x 100 mm

Deep groove ball bearings, ball bearings, single row deep groove ball bearings DKF 6314 Inner diameter: Ø 70 mm Outer diameter: Ø 150 mm Height: 35 mm New ! Dimensions ( single bearing ): 150 x 150 x 35 mm

Deep groove ball bearings, ball bearings, single row deep groove ball bearings, 2 pieces DKF 6212 N P6 ( 6212NP6 ) / inner diameter: Ø 60 mm outer diameter: Ø 110 mm height: 22 mm Features: open, groove in outer ring New ! Dimensions ( single bearing ): 110 x 110 x 22 mm Dimensions ( packaging ): 110 x 110 x 45 mm

Tapered roller bearings, roller bearings, ball bearings TIMKEN 32006XM-90KM1 4 pieces Inner diameter: Ø 30 mm Outer diameter: Ø 55 mm width: 17.5 mm originally packed unused ! Dimensions (package): 120 x 65 x 65 mm

Axial deep groove ball bearings, deep groove ball bearings, ball bearings FAG 51220 Inner diameter: Ø 100 mm outer diameter: Ø 150 mm height: 38 mm New ! Dimensions ( single bearing ): 150 x 150 x 38 mm Dimensions ( packaging ): 155 x 155 x 45 mm

Axial deep groove ball bearings, deep groove ball bearings, ball bearings FAG 51222 Inner diameter: Ø 110 mm outer diameter: Ø 160 mm height: 38 mm New ! Dimensions ( single bearing ): 160 x 160 x 38 mm Dimensions ( packaging ): 165 x 165 x 45 mm

Used overhauled Compressor Siad Low and High pressure System for 1850 CBM Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022 like new and ready for delivery Machine has 1850 CBM of power Complete replacement of the Baty and replacement of bands bearings gaskets valves ATLAS Copco ZR4 screw overhaul with replacement of air filter oil filter and vapor filter ACS Z oil shuttle KIT intake KIT exhaust silencer filter flexible coupling replacement greasing of engine bearings and general compressor control The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need The machinery is guaranteed a 12 month or 2000 hour warranty on all replaced components Only HP LP tank and dryer need to be added The two machines Booster equipment and LP compressor Atlas were purchased by the same company where they increased its compres ...

x-travel:2000 mm y-travel:800 mm z-travel:800 mm table-size:2.000 x 700 mm workpiece weight:3500 kg drive capacity - spindle motor:17 kW spindle cone:50 ISO spindle turning speed range:3000 U/min dimensions of the machine ca.:5265 x 3250 x 2730 m weight of the machine ca.:9 t CNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ...

x-travel:2500 mm y-travel:800 mm z-travel:800 mm table-size:2.500 x 700 mm workpiece weight:4000 kg drive capacity - spindle motor:22 kW spindle cone:50 ISO spindle turning speed range:20 - 3000 U/min dimensions of the machine ca.: 7800 x 3315 x 2730 m weight of the machine ca.:11 t CNC controller: Heidenhain TNC 426 :Auto-indexing UDG (2.5º) :HR-410 used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and  ...

CNC processing centre Brand: TecnoTeam Type: Enjoy Basic 3 Achsen New machine Save your space: Standing upright means progress for human! - With a vertical CNC machine you save a lot of space: Wether for consuming material or a further machine, you have more space to use in your storage. Easy machine use: - TPA makes the use very easy, you find this software at several well-known machine brands - You see the programmed processings on a virtual display, no matter which process: if circle, bow, linear millings or drillings, - Create job lists in the CAM - Forget the calculator, the machine calculates for you. - For this software several genious tips and tricks are possible. With realiability to success: - Technoteam uses High-Quality components from well-established producers. - We modify the machine exactly to your needs: If you process massive wood, you get a stro ...

Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.

CNC-controlled flatbed cutting machine Satronik DS 2500 double-sided. synchronized rack-and-pinion pinion drive in laeng axle game-free timing belt drive in transverse axis, drive system with 3 drive motors working width: 2500 mm Total width: 4000 mm feed: 0 -12000 mm/min 1 x Autogen 1 x Plasma (option) CNC 801 CNC web control CNC 801 - driving control unit/user interface SATO PLC - 80486 Simple and over-the-top menu for programming control panel with large-scale touch switches for all machine functions CPU 80486 DX4 32 Bite CPU/75MHz 10.4 LCD screen Essi format (ISO 6582) Floppy drive 3.5, 1.44 MB (default) 2 pcs. Interfaces V 24 (RS 232C) Flash memory for operating system and 512K for user programs 4 MB memory function list (excerpt) 54 Standard shapes Graphically underscored part programming Programmable cutting joint display of the plate sizesize plate r ...

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

FOR SALE... NEW ORIGINAL ABB VTR 254 BEARINGS 34100-32100 SETS AT TURKEY... TO WHOM IT MAY CONCERN; --WE VE NEW UNUSED ORIGINAL 11 SETS ABB VTR 254 BEARINGS 34100 & 34200 AT OUR STOCK. --BESIDES WE VE 9 SETS SPARE PARTS HZTL 431301R1 AT OUR STOCK AT SPECIAL WOODEN BOXES. PLS FIND DETAILED LIST ON PICTURES ALL PARTS READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...

Vertical axis basket centrifuge with discharge from above with bag mounted on three feet (with straps and compression springs) of second hand. Model FT-12-BG manufactured by COMTEIFA. All parts in contact with the product are made of 316L stainless steel. General characteristics: Maker COMTEIFA Model FT-12-BG Guy Vertical axis basket centrifuge with discharge from above with bag Material Stainless steel 316L Variable speed per frequency converter. Total opening. All parts in contact with the product are made of AISI 316L stainless steel. Mounting on very strongly sized roller bearings. Box of casting bearings. Electric stop brake made by the converter. Stainless steel cap AISI 316L piston movement compensated by spring. Specifications: Discharge Manual above with bag Basket diameter 1,200 mm Basket height 650 mm Maximum permissible load 450 kg Payload 350 d ...

Buhler rotary discharge valve type MPS 22/13, reviewed, with ball bearings, partially with new bearings. Rectangular inlet 130/10, I/U 2, gap 0.05 (2 x), 0.10 (2 x), 0.15 (1 x), 0, 2 (1 x), d = 35. We have used rotary valves in all sizes and of many various types. Just ask! Our technicians will gladly advise you.

Edgebander Symbel Coronel; good condition; cleaned and checked, installed new bearings; Working width 60 mm; 2-roll; suitable for cold glue; Glue tank height-adjustable. Edge gluing machine Symbel Coronel; good condition; cleaned and checked; New bearings; working width 60mm; two rollers; used for cold glue; Glue reservoir adjustable in hight.

USED NX418 DECANTER REF.: C2858 NX 418 RECONDITIONED DECANTER. Carbon steel platform, with 4-leg fixings for ground anchoring. Carbon steel frame, fixed by silemtblock to the platform. Side engine support with belt tension plate. Anchorage of main bearings. Stainless steel bowl in conical trunk shape, in three removable pieces. screw solid discharge built in stainless steel troco-conical shape with contribution of crest tostene and wing advance. Stainless steel top enclosure with three rear hinges for easy opening, screw closure. Feeding tube built in stainless steel Cam type cycle reducer. Main engine at a speed. Power from 18Kw to 3000 Rpm 400V / 50 Hz Properly oversized bearings installed according to manufacturer's standard. Rolling unit driven by 6 V-belts. Save integral protection straps. General characteristics: Model NX418 Weight 1600 kg

Current stock: approx. 965 pcs. Included in delivery are: 01x castor, used Manufacturer: Kama Material Color Roll: Red Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 34 mm Bearings: Needle bearings Roll Material: Rubber Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( Oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 55 mm (middle - middle hole) Weight / pcs.: approx. 0.970 kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Hello all We have the following spares for Wartsila 32 LN Cylinder heads 24 pieces used Connecting rods 12 pieces used Fuel pumps 12 used 1 piece new Pistons 12 pieces used 1 piece new Cylinder liners 12 pieces ueed camshaft pieces 12 pieces used injectors 12 pieces used All of them are dismantled from 2007 built Wartsila 32 LN engine with low running hours and are in really good condition We also have in our warehouse brand new consumable spares for Wartsila 32LN such as: exhaust and inlet valves, valve seats, guides, piston ring sets, main bearings, big end bearings , nozzles , cylinder head gasket sets, anti polishing rings and much more Please contact us at: infofin-marine

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 95 mm Shaft diameter: 30 mm Shaft revolutions: 7 U/min roll diameter: 132 mm Drive: 0,75 kW weight: 220 kg range L-W-H: 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 80 mm roll diameter: 260 mm : 7 U/min : 170 mm : 27 kN : 160 mm : 450 mm total power requirement: 3,7 kW dimensions: 980x1430x1600 mm weight: 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x850x1350 mm weight: 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW range L-W-H: 900 x 600 x 1000 mm weight: 470 kg connected load: 400/50 V/Hz Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 495 kg range L-W-H: 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control: FANUC 0i-TF+ with 10.4"/15" LCD color display and Manual Guide i -12-fold tool turret with BMT65 mounts -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the main spindle -Parts catcher with collection box -Automatic surveying arm -Transformer -CE conformity -English machine manuals -3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle 8": 3-jaw power chuck Ø170 mm (6") for spindle head standard: A2-5; Make: SAMCHULLY, incl. 1 set of soft and 1 set of hard  ...

roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the "new generation" of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought- ...

: 6 St. weight: 12 kg range L-W-H: 990 x 400 x 870 mm Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. Scope of delivery: 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 St. weight: 162 kg range L-W-H: 1200 x 800 x 1050 mm Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. Scope of delivery: 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm characteristics - Versatile application possibilities in general mechanical engineering, Production, one-off production, ... - Central, handy switching for feeds and threads with lead screw and pull spindle - Prism bed made of gray cast iron, inductively hardened and precision ground - Modern main spindle bearings with tapered roller bearings in precision design - Hardened and ground gears and shafts, also in the feed gear - Standard with rapid traverse lengthways and flat to reduce non-productivetimes - Large spindle bore (105 mm) for workpieces with a large di ...

range L-W-H: 1980x510x1860 mm weight: 195 kg : 15 St. weight max. in kg: 700 kg Professional workbench / tool trolley Dimensions of the right 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the right 4th drawer 41.5 x 39 x 15 cm. Dimensions of the right 5th drawer 41.5 x 39 x 23 cm. Dimensions of the middle 3 upper drawers 83.5 x 39 x 8 cm. Dimensions of the middle 4th drawer 83.5 x 39 x 15 cm. Dimensions of the middle 5th drawer 83.5 x 39 x 23 cm. Dimensions of the left 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the left 4th drawer 41.5 x 39 x 15 cm. Dimensions of the left 5th drawer 41.5 x 39 x 23 cm. Dimensions of the back wall 183 x 46 cm. Dimensions of the closets 183 x 30 x 46 cm. Dimensions of the shelf 22.5 x 63 cm. Wheel diameter 150 mm. Maximum capacity of the wheels 175 kg. Per bike. (700 kg total) Maximum capacity per tray 30 kg. Dead weight 195 kg. Overall dimensions 19 ...

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 140 mm cutting capacity - round: 240 bei 45° mm work height max.: 945 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 200 bei 45° mm total power requirement: 3,0 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2650 x 2040 x 2050 mm Very robust machine framework composes of castings from grey cast iron andensures vibration absorption. In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy turntable on both sides in massive housing fitted with pre-stressing tapered roller bearings. Modern concept of the band saw arm allows for large cutting ranges in both upright and angular cutting. Massive arm turning syst ...

turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Berstorff Three Roll Calender Manufacturer: Krauss Maffei Berstorff 2650mm wide x 650mm (26”) diam. Effective working width 2600mm (Roller Head Die Width) Rolls Configuration: ‘I’ shape Rolls Type: Peripherally Drilled Drive: Right Hand Transmission: Direct Drive by Cardan Shafts Motors: 3X 75 KW, 2600 RPM, 50 Hz Nip Adjustment: Hydraulic (Berstorff patented) Fixed roll: Roll 2 (middle roll) Adjustable roll: Roll 1 and 3 (upper and lower roll), Max Roll gap is 80 mn Cross axis: Roll 1, 2 and 3, Hydraulic operated, max. 25 mm Pre-loading & Roll Bending: Available Rolls Speed: Variable, 0.5-10 m/ min Bearings: Antifriction Roller Bearings Electricals/ Controls: PLC Complete with motor and controls Year 2009

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

Control plansifter Rüter 4-part, 1000 mm high, Complete overhaul. Wire mesh 500 my, resopal sieve With product distributor Double bearings completely renewed, product distributor bearings and seals renewed, sieve stacks cleaned Edition with short floor nozzles without control opening

Lifting kneader Kemper F 150 ASL completely overhauled Completely overhauled Kemper lifting kneader Model F150ASL with 2 to 7 stainless steel boilers for a maximum of 240kg dough each.The machine is completely overhauled and repainted, new electrics, new ball bearings, new gears.The machine can be inspected and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - at 2 speeds - with 2 automatic timers (new) - with stainless steel lifting arm - per kettle max. 150kg flour or 240kg dough - with flour dust cover - Boiler with handle - all ball bearings grained - complete electronics new - V-belts new - Machine completely repainted

We offer you here 4 transport castors for sale. Included in delivery are: 04x Swivel castors, used Manufacturer: Kama Material Color Roll: Red Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 34 mm Bearings: Needle bearings Roll Material: Rubber Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( Oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 55 mm (middle - middle hole) Weight / pcs.: approx. 0.970 kg

FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS  ...

BATES Fully automatic valve bag filling, Thermal valve welding, 140 – 180 bags / hour (25 kg, 50 kg), food/non-food, refurbished, like new Description SPECIFICATIONS Valve bag filling, manufacturer Bates, year of construction 1992. The system is designed for the bagging of dry, fine powder in valve bags, whose valve width V = 135 mm (clear width). Since all parts in contact with the product are made of stainless steel, this system is suitable for both the food and non-food sectors. (From a purely technical point of view, ATEX is also fulfilled – but there is NO longer any guarantee for this.) Depending on the product and its characteristics, the production capacity of 25.0 kg bags is approx. 140 – 180 bags/hour. Of course, the system can also process 50.0 kg bags. The offered installation consists of several components: 1. 60FFED fully automatic filling machine  ...