bearings used for sale

Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...

charge load: / : / weight: 1350 kg diameter: 1760 mm height: 1240 mm 0: 1210 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in  ...

Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...

The positive displacement blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Conveyor belt, trough conveyor, trough conveyor GASUS type DG 300-5/2.75 Belt conveyor, conveyor belt, belt conveyor Fabrig No: D-7321915 Year of construction 1996 Usable length: 2.75 meters Belt width: 230/300 mm Deflection roller diameter: 210 / 230 mm (rubberized drive roller )Pulley width: 400 mm Belt speed: approx. 15 meters /min. Motor power: 0.75 kW Mains connection: 400 volts, 50 Hz - Drive via SEW Geared motor inlet hopper 550 x 430 mm- Metal rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles- Rubber conveyor belt with corrugated edge - Conveyor belt has grooves - stable frame made of sheet steel- for horizontal or slightly rising transport of bulk materials Overall dimensions L x W x H: 3000 x 950 x 700 mm Weight: 400 kg good condition; used

Conveyor belt, trough conveyor, trough conveyor probably GASUS type FB 400 x 5500 Belt conveyor, conveyor belt, belt conveyor Fabrig No: F-02071168 Year of construction 1996 Usable length: 5.5 meters Belt width: 400 mm Deflection roller diameter: 225 mm Pulley width: 450 mm Belt speed: approx. 30 meters /min. Motor power: 1.5 kW Mains connection: 400 volts, 50 Hz - Drive via tubular motor - inlet hopper 600 x 400 mm - The support stations are recessed in 2 parts- Metal rollers with maintenance-free ball bearings - Band tension adjustable via threaded spindles- Rubber conveyor belt smooth - stable tubular frame made of steel - cover plate can be dismantled via conveyor belt- for horizontal or slightly rising transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg good condition; used

Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.

Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable f ...

Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouches and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable  ...

Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW(200-300)mm. - Techn ...

Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Techn ...

Bezel, steady rest, lynette -Bezel: max.passage O 207 mm -Tip height: 355 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 590/125 / H745 mm -Weight: 69 kg

96 Units of never used Wartsila 16v32 bearings. The advertised price is unitary.

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

Bezel, stick, lynette -max. passage: Ø 450 mm -Tip height: 305 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 880/100/H870 mm -Weight: 169 kg

weight: 540 kg diameter: 1200 mm height: 1100 mm 0: 350 l total power requirement: 1,9 kW voltage: 350/50 V length in total: 1820 mm - with integrated manual separation ramp - control panel - Dosing pump for liquids - Capacity 382 liters - A soundproofing cover is also offered at extra cost! Sound insulation cover for VKUE 200 + The cover is controlled by a pneumatic piston + While the machine is running, the soundproof cover ensures for significant noise reduction. + It also prevents splashing of water or abrasives + It reduces noise emissions to less than 80 decibels. + The connection requires 6 bar General description: Our vibratory finishing system is suitable for: roughening, removing paint, decoating, deburring, derusting, descaling, de-oiling/degreasing, grinding as well as polishing and smoothing. The can also be used for non-metallic materials machine are used. Depending on the  ...

Shredder mill with blades Brand: Navarro, cutting chamber: 500x450 mm, motor: 30 hp. Extraction of side grille, water-cooled bearings and electrical panel.

Bezel, stick, lynette -max. passage: Ø 240 mm -Tip height: 290 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 760/130/H610 mm -Weight: 125 kg

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 870 mm turning diameter over slide: 420 mm turning speeds: 36 - 1600 U/min quill:: 5 MK quill travel: 150 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3990 kg. dimensions: 4500 x 1280 x 1650 mm - Versatile applications in general mechanical engineering, production, individual production - The machine bed, cast in one piece, is extremely torsion-resistant and+ low-vibration, which is an essential requirement for accurate turning is fulfilled - Modern main spindle bearing with precision angular contact ball bearings - Central, handy circuit for feeds and threads, with control and pull spindle - Serially with rapid traverse longitudinal and plan to reduce non-productive times - The gears are oversized, hardened and precision ground - The removable bridge al ...

drive motor: 7,4 kW tool adaptor: ISO 40 turning speed range: 1800 U/min Torque: 400 Nm Technical specifications Bodies arranged at 45° with respect to each other. Maximum transmissible torque from 550 Nm to 3.180 Nm. Maximum speed from 1.800 rpm to 3.000 rpm. Automatic clamping of the tool, driven by a hydro-mechanical system. Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). Spindles and gears are made of case-hardened and tempered chrome-nickel. High-precision angular contact ball bearings. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ripper 2 axes, Cutting chamber: 620x840 mm, 2 motors: 9.2 KW each. Electrical panel, hopper and foot. Newly revised with new bearings and all new blades and counter-blades (combs).

Working width: 2000 mm bending capacity: 72.0 mm Bend: 66.0 mm Number of driven rollers: 3 Diameter top roll: 500 mm Diameter lateral underrollers: 420 mm conical bending device by inclination of the two side rollers hydraulic folding bearings Motor power: 56 kW mobile control panel with digital display Net weight: approx. 28 tons

Power: 1.1kW; Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter; Speed range: 120 - 1810 rpm; RPMs: 9; Spindle mount: MK-4; Drilling stroke: 120 mm; Spindle projection: 254 mm; Table size: 475 mm x 425 mm; Tilt / rotate drilling table sideways: 45Â left / 360Â; Column diameter: 80 mm; Quick-release chucks: 1 - 16 mm; Weight: 132 kg; Industrial motor User-friendly safety switch according to IP 54 Digital drilling depth and speed display integrated in the housing Separate emergency stop impact switch Precision spindle bore Safety electrical system in 24 V DC voltage Guaranteed concentricity less than 0.02 mm measured in the drill quill Drilling spindle with precision ball bearings High-quality high-speed drill chuck Drilling depth stop Precision-crafted, stable drill table with diagonal T-slots and circumferential cooling water channel V-belt cover ...

Bezel, stick, lynette -Max. Diameter: 325 mm -Tip height: 405 mm -Edition: ball bearings -Drawing: in the photos -Dimensions: 780/140/H845 mm -Weight: 97 kg

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

Technical data paper shredder: Manufacturer Bollegraaf Type HBS 110 - 1500 Year of manufacture 1994 Drive power 110 kW Throughput approx. 25 t/hour Dimensions of feed hopper 1,970 x 2,000 mm Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H) Weight approx. 11.5 t Special features: The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant. Range of applications: The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder: The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery: Shredder ...

sheet width: 2050 mm plate thickness: 2 mm strokes per minute until: 38 cutting angle: 1,75 ° table height over floor: 870 mm total power requirement: 3 kW weight of the machine ca.: 1520 kg range L-W-H: 2,2 x 0,6 x 1,2 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emerge ...

Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...

Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the  ...

Spiral mixer Kemper SP 150 AL completely overhauledDescriptionA completely overhauled spiral mixer Kemper SP 150 AL with 2 extendable stainless steel bowls.The machine is completely overhauled and repainted. The machine's entire electronics including control cabinet, timers, buttons and wiring have been renewed. Manufacturer: Emil Kemper GmbHType: SP 150 ALProduction: completely overhauledMaterial: Kettle and spiral made of stainless steelThe spiral mixer is completely overhauledAll electronics (relays, timers and buttons, etc.) are newAll V-belts are newThe electrical box is newAll ball bearings are newWith automatic boiler locking2 timers automatic2 speedsFor max. 150 kg flour / max. 240 kg doughTub capacity: 350 litresWith flour dust CoverWith 2 kettles optionally also with several boilers

Used bread slicer and packaging machine HARTMANN, type: GBK/410 - 918 / 65L -completely overhauled- - Slicer for all types of bread - Blower for opening the bag foils - 2 sliding arms, alternating -Clipper - MHD Printer for Clipper - Year of construction: 10 / 1996 - For packing whole or half breads, sliced or uncut - Connection: 230 / 400 V, 50 Hz, 16 A, 6 kW - Weight: approx. 1,500 kg General overhaul: - all power cables renewed - All valves new from FESTO - All bearings completely replaced and renewed - over 300 working hours - refurbished to the value of over EUR 16,000 The machines have been completely overhauled and are in very good condition. After the overhaul, the system was never used because the order situation changed and the product type was changed so that this machine was no longer needed.

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

pressure: 80 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the ...

pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 4,0 mm/sec return speed: 10,0 mm/sec engine output: 4,0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounte ...

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment rang ...

VACUUM PUMP 7,5kW 510m3 Becker SV 500/1 + Cartridge filter + non-return valve SIDE CHANNEL COMPRESSOR SV 500/1 SINGLE-STAGE VACUUM PUMP Side channel fan - ideal pump for MDF In addition, it is equipped with a non-return valve and an external filter with a cartridge. The SV 500/1 is a single-stage regenerative blower that offers high performance in a quiet, touchless environment. 100% oil-free and contact-free, these pumps are maintenance-free, highly efficient, and require only minimal maintenance. SIDE CHANNEL COMPRESSOR Side channel blowers generate vacuum or compressed air for a wide range of industries. In these blowers, the rotor rotates contactlessly, so they are maintenance-free and wear-free. Above the upper and lower parts of the impeller there are separate working channels, thanks to which it is possible to use a single-stage version of the device for high flow ...

6-axis circular saw blade grinding machine with loading robot Schmidt Tempo Freestyle -inclusive. automatic fire extinguishing system Kraft & Bauer The machine is suitable for regrinding and re-gearing of all tooth shapes, cutting and angles with automatic threading, as well as for automatic chamfering in the deep grinding process using CBN or diamond grinding wheels. The machine is technically overhauled in our company and is prepared for the use of grinding oil, so that a much longer service life of all units is guaranteed in contrast to working with emulsion. All mechanical components such as linear guides, ball screw, grinding spindle. Bearings, etc., as well as wear parts are replaced. Saw blade diameter 20 - 550 mm Saw blade thickness 6 mm Working speed 3 - 75 strokes/min. Number of Teeth 999 Max. Saw blade stack height 180 mm

Slicer Bizerba VS 12 C F, large carriage, Ceraclean surface (easier to clean), with grinder, Connection 400V, built in 2019, with new bearings and drive belts, Dimensions LxWxH approx. 70x67x50cm, weight approx. 59kg, with signs of wear, but runs flawlessly

material width: 1650 mm material thickness: 2,00 mm no. of straightening rolls: 23 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 53,60 mm straight. rolls-needle bearings: ja / yes between stands ca.: 1750 mm barrel length ca.: 1820 mm straight. speed ca.: m/ min total power requirement: 58 kW weight of the machine ca.: 19,60 t dimensions of the machine ca.: 6,00 x 3,00 x 2,90 m Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individually deliverable 1 set of straightening rollers (replacement rollers) diam. 53.68mm Central grease lubrication of the straightening rollers bearing rails Circulating oil lubrication of gears and card ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...

CNC Wood Milling Machine 6KW 1300x2500 CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. ◾Hybrid table, i.e. vacuum, enabling non ...

Diosna Spiral Mixer Type: SP 120 D 2 new timers 2 speeds Spiral newly galvanized Stainless steel boiler Flour dust cover for 75kg flour or 120kg dough on castors with brakes 380V 50Hz New ball bearings, new belts, new watches, new electronics Height: 125cm Width: 85cm Depth: 130cm

STAMFORD Synchronous Generator CG634J2 788 KVA, 630 KW 400 / 231 V 1137.4 A 50 Hz, 1500 1/min. Accessories: - Winding PT100 - AVR ABB Unitrol_1010 COMPLETELY REHAULED, with new bearings and winding impregnation

Rego Stop/ Mixer Specifications: Type: SM2000 M digital control max. 30ltr incl. stainless steel kettle and whisk new ball bearings, new belts, new ball head, new electronics, repainted Height: 163cm Width: 58cm Depth: 70cm

STAMFORD Synchronous Generator - 2000 KVA Type rating - 690/400 V - 1540 A - 50 Hz - 1500 1/min Completely overhauled with winding refurbished and new bearings.

TechnologieCNC Milling Plotter CNC 1530 INDUSTRY 2.0 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Covscsx ◾Hybrid table, i.e. vacuum, enabling non-invasive fixation of th ...

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...