beam saw used for sale

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

Machine No.: 92380 Weight: 210kg Year of construction: 04/2011

SPECIFICATIONS: Workbench for reading and cutting glazing beads Workbench dimensions: 3000 x 1250 mm Tilt of saw blades: 45° Pneumatic/electric operation

• Manual operation • Good properties for profile cuts • Adjustment of the cutting angle via backlash-free tapered bearings • Quick clamping device • Precise belt guide, with ball bearings and carbide inserts • Electric coolant pump Specifications • Stop: 2000 mm • Power: 400V 2.7 A • Engine: 0.8 – 1.5 HP • Cutting speed: 40 – 80 m/min. • Vise opening: 315 mm • Jaw height: 110 mm • Jaw length: 180 mm • Working height: 1080 mm • Mitre cut: 60° right • Dimensions (LxWxH): 870 x 1250 x 1900 mm • Weight: 270 kg

Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Reciprocating saw, dovetail saw, tiger saw, saber saw -Nominal power input: 700 W -in the suitcase -Dimensions: 570/135/H230 mm -Weight: 10 kg

Saw blade 12 pieces -Various sizes -From: Ø 125 mm to: Ø 180 mm -Package: complete -Weight: 7 kg

SPECIFICATIONS: Max. cutting length: 3000 mm Max. cutting height: 50-60 mm Manual Saw Blade Feed Adjustable cutting width Electric/pneumatic operation

Automatische nachschnittsaege,saummeranlage Mohringer 3 bewegischesaege steuerung microtec baujahr 2009 komplete anlage

Form 7 473 Band saw Cutting height max. 90° 270mm Cutting width max. without stop 465mm Saw blade length 3455mm Motor: 1.6KW 400/230V Suction nozzle 2x 100mm Weight: 160kg Exhibition Machine:

Serial Number: 7880-10 Weight: 2,5 tons Power: 6 kW Air pressure: 6 bar Length mm: 5000 Width mm: 1000 Height mm: 3500 Working height: 70 cm. Transport size L x W x H: 5,0 x 1,0 x 3,5 + 1,1 x 0,8 x 1,35 Maximum speed: 1,6m/min. Min.-max. glass thickness: 50 mm Condition machine : Good Control type: Manually/ semi automatic Electric. Connection: 400 V Documentation: No Instructions: No Electric diagram: No Photos en video available

Aluminum circular saw, miter saw, glass strip saw, aluminum miter saw, metal miter saw, compound miter saw -Processing: of flat, angle and solid materials, pipes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg

Weibert BS 400 Band saw Wooden Band Saw Roller Diameter 400mm Belt width 25 mm Cutting height 320 mm Swivel -15° +45° Motor power 2.2 KW Belt length 3300 to 3400mm Suction nozzle 2x 100mm WJ-X00100 Exhibition machine

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

Model: STG 230 GANC Type: SR-230 No. SR-230/070/199 Connection: 3x400V EL Box: ASTP

Vollmer electric line saw sharpener

Key data: 45 °, 3800 mm

SPECIFICATIONS: Max. saw blade diameter mm: 400 Saw blade inclination: 0° - 45° Saw carriage length mm: 3800 Installed capacity: Hp 7.5 Scoring diameter mm: 120 2 angle stops

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Key data: 350 mm, 45 °

Saw blade: ø 350 mm Saw Capacity: 110 mm Round / 100 mm Square Saw angle: 45º Left/Right Sawing speed: 18 / 36 rpm Equipped with: - Coolant system - Pneumatic clamping - Variable feed -Saw blade Country of origin: Germany Motor power: 1.8 kW Machine LxWxH: 800 x 1000 x 1850 mm Machine weight: 800 kg

Sell Carat wall saw type W3011. Blade diameter: 300mm The machine is in good condition, functional and tested.

• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump

Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany

Key data: 500

ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine

FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315

Control: KASTO Max.cutting range: 400 x 400 mm Cutting speed:20 ? 110 m/min Saw band dimension: 5700 x 41 x 1.3 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Germany

Control: TMJ Max.cutting range: 360 x 305 mm Cutting speed:10 ? 100 m/min Saw band dimension: 3660 x 27 x 0,9 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Czech Republic

Key data: 600 mm, 45 °

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Key data: 600 mm, 20 °

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg