beam drill used for sale

Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dürselen Corta PB 04 Paper drilling machine Age: 1999 4-spindle Drill hole diameter: 3-15 mm Drilling distance: 31.7 – 293 mm Max. stacking height: 50 mm

Key data: 50 mm, 1600 mm

Radial drilling machine max. drilling diameter in steel 50 mm max. drilling diameter in cast iron 60 mm max. thread in steel M50 x 1.5 Spindle projection 1600 mm max. distance spindle nose to lower part plate 1505 mm max. boom height adjustment 875 mm Max. drill carriage adjustment on boom arm 1280 mm Taper of spindle Morse 5 Spindle stroke 310 mm Spindle speed infinitely variable 12 Spindle speed range 28 - 2500 1/min Max. torque 310 Nm Base plate 1820x986 mm Machine weight approx. 4550 kg

Stegherr dowel drilling machine Manufacturer: Stegherr Type: FD Year: 1995 Mach.Nr.: 35/12951 Control: Alfa-nummeric mit pre-programmed drilling patterns Alongsiide and head-tail drilling Length stopper: Left- and right digital stoppers for alongsicde drilling Head-tail: Left-Right drilling wih revolver posiioning devices Dowels: 6-16 mm Stroke: 80 mm Motor: 2.2 KW Air pressure: 6 bar Dust extraction: ø80 mm Condition: fully functional tested – fully operational

Weeke ABD 150 Drill and dowel inserting machining center manufacturer: Weeke Type: ABD150 Year: 2013 Mach.Nr.: 0-253-05-5352 Production hours: Desctription: CNC-controlled drill- and dowel automat for production of furniture and such Workpiece dimensions: X-ax 20 – 1.250 mm Y-ax: 100 – 800 mm Z-ax: 10 – 60 mm Center positioning fence: max. 600 mm Workfield: 1.250 mm Positioning: X-as AC -servo drivesystem via tooth bar Y-as: manual setting X-as: manual setting Positioning stops: Table support with rear- and sideward stoppers 6 workpiece supports manual positioning over full machine width, with scale Pneumatisch controlled center fence via manual control button 5 top clamps, manual positioning Vacuum clamps for sensitive panel surface 10 vacüumcups (115140100 mm) manual position over full machine width 2 vacüumcups (12575100 mm) manual positioning over full machine width 1 externa ...

Vitap Forex 24 Manufacturer: Vitap Type: Foratrice Forex24 Machine Nr.: 790847 Year: 1999 Motor: 1.8 kW Nr. Spindel: 21+3 Head and topdrilling: Electro-pneumatic tilting Semi-automatic: Verical and horizontal drilling: RPM: 2.840 rpm Drilling dept: Max. 80 mm, with Siko counter Raster: 32 mm Spindel/group: 3-5-9 Length stoppers: both sides scale with 2 filp stops per side Clamps: 2 pneumatic clamps top-side manual adjustment Pressure: 6-8 bar Dimensions: 1.570920 mm Weight: 350 KG

Hofmann long hole drill Manufacturer: Hofmann Type: LL160 Year: Specifications: Drilling dept.: max. 145 mm Drilling length:.: max. 240 mm Height adjutment: max.135 mm Drilling: Dept limitation stopper Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Power: 1,3 kW Drill clamp:: 5 – 20 mm

4-Spindel-Papierbohrmaschine / 4 heads Paper Drilling Machine 4-Spindel-Papierbohrmaschine / 4 heads Paper Drilling Machine Nagel Citoborma 480 AB Serial-No. 884370 Stapelhöhe / Pile height max. 60mm Einlegebreite / Paper Width max. 460mm Throat Depth 270mm Lochdurchmesser / Drill bit sizes 2 - 35mm 1-4 Bohrköpfe / 1-4 Drilling heads Inkl. extra Bohrer / Include extra spare drilling heads Es sind Bohrungen unterschiedlicher Größe in beliebigem Material wie Papier, Pappe, Kunststoff, Leder, Textilien mit Bohrerdurchmessern von 2 mm bis 35 mm bei maximaler Stapelhöhe von 60 mm möglich. Holes of various sizes can be drilled in a wide range of materials—such as paper, cardboard, plastic, leather, and textiles—using drill diameters from 2 mm to 35 mm and a maximum stack height of 60 mm.

Alzmetall AX3 SV Säulenbohrmaschine Hersteller: Alzmetall Typ: AX3SV Baujahr: 1996 Zustand: gut, gebraucht Drehzahlbereich: 160 ? 2250 U/min Bohrvermögen (St60) 40 mm Futter-/ Werkzeugaufnahme MK 3 Spindelhub 120 mm Ausladung 293 mm Säulendurchmesser 115 mm Abstand Spindel-Tisch min./max. 117 / 701 mm Vorschub 0,1 + 0,2 mm/U Nettogewicht ca.270 kg Sonderausstattung: ? Automatischer Vorschub ? Spindelschutz

Wood drill bits, the set includes 6 drill bits, 460 mm long, in sizes from 6 mm to 18 mm Auction-ID: A7-50066-256

21 V cordless drill/screwdriver The device is ideal for drilling in different materials and for screwing and unscrewing screws, bolts, self-tapping screws, etc. The set includes two 2 Ah batteries, a charger and a practical plastic case. Auction-ID: A7-50066-9

Set 170 Pcs Professional HSS Metal Drill Bits, Engineering Presion Drilling Tools, Assorted Titanium Kits 1mm-10mm Auction-ID: A7-50066-281

For metal, Ø1-10 mm Overall dimensions: 350 x 250 x 100 mm Weight: 5 kg Auction-ID: A7-50208-271

For metal, Ø1-10 mm Overall dimensions: 350 x 250 x 100 mm Weight: 5 kg Auction-ID: A7-50208-169

Metal drill bit set. The bits are made of HSS high-speed steel with titanium nitride coating. The set includes 19 bits in the following sizes: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0 mm. The set is contained in a metal box. Auction-ID: A7-50066-158

Set: Set of two LOHMEYER NDC642A & NDC602A CNC drills – sold only as a set Type: Automatic Continuous Flow Multi-Spindle Drills Function: Vertical and horizontal panel drilling with automatic feeding and unloading Construction: High-strength steel frame, castings for precision and durability Drill heads: 12 multi-spindle rows with servo motors and digital positioning Control: PLC/PC with touch screen and machine learning for new drilling patterns Total power: approx. 95 kW (38 kW + 57 kW) Dimensions (mm): approx. 11,000 × 3,650 × 2,800 Weight (kg): approx. 14,000 Power supply: 400 V – 3 phases – 50 Hz Year: 2022 Manufacturer: LOHMEYER Notes: Machines sold together and inseparable – same principles as KUPER machines. Equipped with chip conveyors, pneumatic clamping, servo motor control and user-friendly PLC interfaces. Serial number included in the  ...

Wood drill bits, the set includes 6 drill bits, 460 mm long, in sizes from 6 mm to 18 mm Auction-ID: A7-50066-56

Set 170 Pcs Professional HSS Metal Drill Bits, Engineering Presion Drilling Tools, Assorted Titanium Kits 1mm-10mm Auction-ID: A7-50066-181

Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-326

STEMA MS Multi-Point Drilling Machine Panel capacities: L 50–600 mm, W 50–1300 mm, thickness 16–28 mm. Robust machine for precise drilling series, quick adjustment. Auction-ID: A1-50215-21

Metal drill bit set. The bits are made of HSS high-speed steel with titanium nitride coating. The set includes 19 bits in the following sizes: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0 mm. The set is contained in a metal box. Auction-ID: A7-50066-258

Set 170 Pcs Professional HSS Metal Drill Bits, Engineering Presion Drilling Tools, Assorted Titanium Kits 1mm-10mm Auction-ID: A7-50066-81

21 V cordless drill/screwdriver The device is ideal for drilling in different materials and for screwing and unscrewing screws, bolts, self-tapping screws, etc. The set includes two 2 Ah batteries, a charger and a practical plastic case. Auction-ID: A7-50066-109

21 V cordless drill/screwdriver The device is ideal for drilling in different materials and for screwing and unscrewing screws, bolts, self-tapping screws, etc. The set includes two 2 Ah batteries, a charger and a practical plastic case. Auction-ID: A7-50066-209

For metal, Ø1-10 mm Overall dimensions: 350 x 250 x 100 mm Weight: 5 kg Auction-ID: A7-50208-129

Metal drill bit set. The bits are made of HSS high-speed steel with titanium nitride coating. The set includes 19 bits in the following sizes: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0 mm. The set is contained in a metal box. Auction-ID: A7-50066-58

Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50066-260

Wood drill bits, the set includes 6 drill bits, 460 mm long, in sizes from 6 mm to 18 mm Auction-ID: A7-50066-156

Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable 80 - 1170 rpm - 2 feeds 0.1 / 0.2 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - Right – Counterclockwise rotation - Keyless chuck 1-13 - Lighting

Drilling machine, pillar drilling machine, column drilling machine, tapping machine, thread cutting machine -Manufacturer: Möller, pillar drilling machine type MOE 1132 -Engine: Loher 1.5 kW -Speed: 110 - 1450 rpm, continuously variable right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Table size: Ø 370 mm, travel 735 mm -Spindle holder: MK3 -Spindle stroke: 170 mm -Projection: 280 mm -Column Ø: 130 mm -Dimensions: 940/650/H1830mm -Weight: 398 kg with pallet

Drilling machine, bench drill, pillar drill, column drill -Clamping table: with fixed machine vice -Table size: 275 x 325 mm -Spindle mount: MK3 -Protrusion: 300 mm -Speeds: 90-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 125 mm -Translation about: gears Quantity: 1 piece available -Dimensions: 770/660/H2060 mm -Weight: 284 kg

Auction-ID: A1-50229-68

Offer 26203 Technical data: - Drilling capacity - in steel 16 mm - - in aluminium 20 mm - Drilling spindle holder MK 2 - Drilling depth 100 mm - Spindle / column projection 215 mm - 6 drilling spindle speeds stage 1 200 - 1600 rpm - 6 drilling spindle speeds stage 2 400 - 3200 rpm - Drive 400 V / 0.7 kW - Drilling table with T-slot W 250 x D 320 mm - Max. distance between drill chuck / table approx. 220 mm - Space requirement approx. W 300 x H 1050 x D 450 mm - Weight approx. 100 kg - Keyless chuck 1 - 13 mm - Coolant device - Original machine cabinet

Offer 26251 Technical data: Drilling capacity in steel ST 60 32 mm Drilling capacity in steel ST 60 40 mm Long spindle MK 3 Drilling spindle speeds infinitely variable 160 - 2250 rpm Drilling spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machined base plate with T-grooves 400 x 400 mm Max. distance from base plate to spindle 600 mm Emergency stop button E. Footswitch Space requirement approx. W 450 x H 1250 x D 900 mm Weight approx. 250 kg Keyless chuck Table base

In metal case.

table with 4 slots, Incl. matching tool holders

incl. vice, jaw width: 100 mm.

Incl. vice, jaw width: approx. 150 mm

• Drilling units: four • table with one slot • vise, jaw width: 80 mm

incl. Machine vice, jaw width: approx. 135 mm

Spindeldrehzahl: von 220 bis 2500 U/min, Spindelaufnahme: MK 2, Motorleistung: 550 kW, Betriebsspannung: 400 V, Tischabmessungen: 200 x 200 mm

WABROTECH DJ-16 E Magnetic Core Drilling Machine Manufacturer WABROTECH Model DJ-16 E Condition untested Location 73529 Schwäbisch Gmünd DE Lot 25

Maschinennummer: 00874, Betriebsspannung: 220 V, Frequenz: 50 Hz, Anschluss: 315 W, Tischdurchmesser: 250 mm

ASSFALG ASM-125/S Drill Grinder Manufacturer ASSFALG Model ASM-125/S Year 1987 Condition untested Location 72589 Westerheim DE Lot 164

Additional technical specifications: • max. tube diameter: approx. 30 mm • Chuck clearance: 30 mm • max. clamping length: approx. 3200 mm

Drehzahl: von 200 - 2800 U/min, Bohrtiefe: bis 100 mm

Maschinennummer: 831285, Schleifscheibendurchmesser: ca. 160 mm

SOLID TB 15 Bench Drilling Machine Manufacturer SOLID Model TB 15 Condition untested Location 72589 Westerheim DE Lot 37

Attention: the tapping head seen in the photos is not included in the scope of delivery! Additional technical specifications: • Drilling units: three • table with one slot

Betriebsspannung: 380 V, Nennstrom: 16 A, Frequenz: 50 Hz, Tischabmessungen: 340 x 230 mm