126,731 used machines on RESALE, but how to find them? Machine Search
For screwing steel or aluminium profile sheets. 5 boxes of 500 pieces. Auction-ID: A1-45977-235
For screwing steel or aluminium profile sheets. 3 boxes of 100 pieces each. Auction-ID: A1-45977-230
For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-236
For screwing steel or aluminium profile sheets. 5 boxes. 500 pieces. Auction-ID: A1-45977-248
Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTurning diameter200 mmTransverse stroke182,5 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmGeneralUniversal Turning Machines; Control: Siemens 840D SL Main drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ext ...
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the ...
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...
Conrad drill rig, suitable for geothermal drilling., , - Machine manufactured in 2018, - Hours: 5,985, - Maintenance performed by the manufacturer, - Fully documented, - Powered by an IVECO N45 ENT, 4-cylinder Stage 5 diesel, - Manipulator included, - Remotely controllable via remote control, - Pull up: 5000 daN, - Pull down: 3000 daN, - 4 drill head, bore 100mm, - Included with the machine: 32 drill pipes of 3 meters long (96 meters total), , Very neat and well-functioning machine, ready for immediate use!, , Contact us for an excellent offer, , = More information =, , General information, Year of manufacture: Aug 2018, Model year: 2018, Colour: Green, , Technical information, Power: 125 kW (170 HP), Number of cylinders: 4, Engine capacity: 4.500 cc, Type of fuel: Diesel, , Condition, Technical condition: very good, Visual appearance: very good, , Financial information, Price: On reques ...
- 4 head drilling machine - with the existing accessories
RADIAL DRILLING MACHINE Inv. No. 13.214N1 Make MAS Model VR2 Mach.no. 5078 Max. drilling capacity Ø 25 mm Max. capacity (cast iron) Ø 35 mm Taper MT 3 Radius 590 mm R.P.M. 90 -4500 mm KW 1.5 Volts 380 Cycles 50 Auction-ID: A1-45737-191
HORIZONTAL BORING MILL (table type) Inv. No. 13.077A1 Make UMA Model BF56 Spindle diameter Ø 75 mm Taper ISO 40 DIN Table 450 x 560 mm Cross travel (X) 550 mm Drilling height over the table 600 mm Drilling range 55 mm Drilling depth 900 mm Rapid feed for table Longitudinal travel 4 m/min Cross travel 2 m/min Weight 2600 KG Including: Induction-hardened table guides Electromagnetic feed coupling Emergency stop button for rapid traverse and electromagnetic feed clutch Protective covers over the bed 1 hardened sleeve for machine vice, 40 mm opening Auction-ID: A1-45737-138
DRILLING MACHINE Inv. No. 12.973N1 Make ERLO Model SE25 Drill of benchtop manual feed • Feed manual • Transmission gears • Column diameter: 100 mm • Distance from spindle to column: 250 mm • Fixed table, moveable and rotating bit • Drilling capacity: ⌀ 25-30 mm • Tapping capacity: M 22-25 • Spindle cone: CM 3 • Engine power: 1.1/1.6 | 1.5/1.9 HP • Num. and selections of speeds: (8) 65 – 3060 rpm • Drilling depth: 120 mm • Weight: 200 kg • Measurements: 560x380x935 mm • Cooling equipment • Light equipment Auction-ID: A1-45737-123
HORIZONTAL BORING MILL (floor type) Inv. No. 12.019BM Make UNION Model BFP 125-1 Mach. No. 7935/62 Spindle Slide. Ø 125 mm Spindle Taper ISO 50 P.D.B. Horizontal Travel Spindle 1.130 mm Horizontal Travel Column 6.000 mm Vertical Travel Headstock 1,700 mm Cross Travel Column 400 mm R.P.M. 2.24 - 450 (27x) KW 14 Volts 380 Cycles 50 Including: Facing Head D.R.O. Auction-ID: A1-45737-107
HORIZONTAL BORING MILL (floor type) Inv. No. 11.474BM Make UNION Model BFP 125 Mach. No. 10386 Spindle Slide. Ø 125 mm Spindle Taper ISO 50 P.D.B. Horizontal Travel Spindle 1.000 mm Horizontal Travel Column 7.000 mm Vertical Travel Headstock 2,500 mm Cross Travel Column 450 mm R.P.M. 3.55 – 710 (27x) kW 25 Volts 380 Cycles 50 Including: Facing Head Ø 800 mm Auction-ID: A1-45737-101
unused; in a suitcase; Max brick drill diameter 132mm; Max concrete drill diameter 80mm; no load speed 1 720-1230rpm; no load speed 2 1000-1780rpm; with water supply; 7749 Auction-ID: A1-45901-306
equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-45901-308
unused; in a suitcase; Max brick drill diameter 132mm; Max concrete drill diameter 80mm; no load speed 1 720-1230rpm; no load speed 2 1000-1780rpm; with water supply; 7749 Auction-ID: A1-45901-307
NC HORIZONTAL BORING MILL Inv. No. 13.033A1 Make SCHARMANN Model WF132AX Table 1,500 x 3,000 mm Spindle diameter 132 mm Taper ISO50 Longitudinal travel table 3.000 mm Cross travel 1,500 mm Vertical travel headstock 1.750 mm W-Axis 950 mm RPM 16 – 1,250 kW 30 Volts 380 Cycles 50 Auction-ID: A1-45737-132
MOBILE HORIZONTAL BORING MILL Inv. No. 11.583B1 Make GIDDINGS & LEWIS Model 230-5 Table 812.5 x 2,812.5 mm Spindle diameter 75 mm Taper MT 5 Horizontal spindle travel Longitudinal travel Cross travel Vertical travel headstock 2000 mm RPM kW Volts 400 Cycles 50 Hz Including: Digital read out Auction-ID: A1-45737-103
equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-45901-309
Drill Comec FMC 900+ AGG Automatic loading from the magazine Number of spindles 3 Number of milling spindles 1 3kw main motor 0.5kw milling machine motor Element length max 900mm Element width max 100mm Maximum drilling distance 800mm Use in large series of chairs, beds, cots as well as in components of other furniture Net price
Drilling and sawing machine for side rails Franke type SG Technical data: Station 1: Cutting components to length Station 2: Drilled on the front side in increments of 27, 32 or 60 mm, 95 mm deep Station 3: drill another hole on the front side or the holes from station 1 are blown out Station 4: Deflection Testing
SCM DK090 S4 Dowel Drilling Machine – 4-Spindle, Pneumatic, Mobile For sale is a reliable dowel drilling machine type DK090 S4, manufactured in 1993 by SCM and Elektromotorenfabrik HOF. The machine is ideal for row and carcass drilling. It has a pneumatic drilling system, 4 spindles, foot release and a solid table top. Thanks to the stable chassis, it can be used flexibly in any workshop environment. Traces of use present, but technically ready for use. Auction-ID: 03A-8S7-3
Column Drill Knuth Type SSB 35X Technical data: - Power (kW): 2.4 - Voltage (V): 400 - Frequency: 50 Hz / 3 phases - Various drills and drill holders: included - CE
1x Type DDF440 18V, 1x Type BTD134 14.4V, 1x Flashlight Type BML145 14.4V, Charger Type DC18RC. Auction-ID: A1-45979-189
Machine number: 6016 Speed range: 320 to 1600 rpm Table dimensions: approx. 290 x 220 mm (clamping surface of the table) Auction-ID: A7-46287-226
Machine number: 133979 Speed range: 900 - 10,000 rpm Table dimensions: approx. 200 x 200 mm Auction-ID: A7-46287-35
Machine number: 181578 Table dimensions: 290 x 225 mm Speed range: 240 to 3800 rpm Auction-ID: A7-46287-4
The long-hole drill is in used but working condition. Always been well maintained. Auction-ID: A3-43519-34006
Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5,Φ6,Φ7,Φ8, ...
Machine number: 189368 with a total of 6 drilling spindles Table dimensions: 340 x 300 mm with two grooves Auction-ID: A7-46287-133
Serial number: 36434 Operating voltage: 380 - 415 V Connection: 1.5 kW Speed: up to 1400 rpm Rated current: 5.7 A Speed: from 70 to 2590 rpm Drilling depth: up to 170 mm Table dimensions: 650 x 270 mm with three grooves incl. three-axis digital display from the manufacturer HEIDENHAIN also an attached vice, jaw width: 85 mm and a matching dividing head Auction-ID: A7-46287-93
with two electro-mechanical drives with multi-spindle head 6 tapping units, 4 of which are equipped Distance between the drilling units: approx. 400 mm Auction-ID: A7-46287-189
Includes: (1x) wooden stand with drills in various types and sizes. Auction-ID: A1-45979-102
Machine number: 00121330 Speed range: 80 - 1400 rpm Table dimensions: 350 x 300 mm Auction-ID: A7-46287-33
Stored in working condition, buyer must provide transport himself. Elevator available. Auction-ID: A3-43519-17035
Serial number: 508219 Table dimensions: approx. 330 x 260 mm Auction-ID: A7-46287-176
Machine number: 00122457 Speed: from 240 to 3800 rpm Table dimensions: 300 x 230 mm with vise attached, jaw width: 100 mm Auction-ID: A7-46287-92
Machine number: 182396 Speed range: 320 - 1600 rpm Table dimensions: 290 x 225 mm Auction-ID: A7-46287-39
Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5,Φ6,Φ7,Φ8, ...
Stored in working condition, buyer must provide transport himself. Elevator available. Auction-ID: A3-43519-17023
Machine number: 14018 Table dimensions: approx. 290 x 225 mm incl. small vice, jaw width: approx. 80 mm Auction-ID: A7-46287-37
1 x with impact function and 1x without impact function Auction-ID: A7-46261-459
with two drilling units with 4 drilling spindles each Auction-ID: A7-46287-149
Equipped with: adjustable drilling table Auction-ID: A1-45979-119
Machine number: 144359 Speed range: up to 1600 rpm Table dimensions: approx. 290 x 225 mm Auction-ID: A7-46287-14
Tables can be adjusted at an angle. Auction-ID: A1-45979-146
1x Type DDF440, 1x Type BTD134, 1x Flashlight Type BML145 Auction-ID: A1-45979-188
maximum number of results exceeded
please refine your search
150 € 
