137,854 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 40 mm throat: 330 mm bore stroke: 190 mm spindle taper MT: 4 MK table:: 500 x 400 mm column diameter: 140 mm turning speeds: 90 - 1500 U/min total power requirement: 2,2 kW weight of the machine ca.: 435 kg. range L-W-H: 570 x 930 x 2170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1x 18.Volt battery without charger, 1x 230 Volt Auction-ID: A1-44050-78
Machine No.: 311615 Type: U1 Volt: 380V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 310 kg
Machine No.: 306916 Type: U1 Combi Volts: 380 V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 760 kg
drill diameter: 2 - 13 mm drilling length: ca.160 mm lip angle: 90 - 135 ° total power requirement: 150 W weight of the machine ca.: 8,5 Kg dimensions of the machine ca.: 20 x 40 x 20 cm Grinding range from 2 - 13 mm Accesories: CBN grinding wheel for HSS tools ER 29/12 pliers set 12 pieces from 2 - 13 mm, increasing by 1 mm, double slotted for intermediate sizes Operation manual Spare part list The machine can be demonstrated in our company. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3858 Furukawa HCR1450 ED year/Baujahr 2015 10.150 hours/hours 15.3 t Blast-hole drill rig; new engine installed approx. 1,490 hours ago; old engine—still functional—included (high crankcase pressure due to worn piston rings); includes a pallet of spare parts (5 hammer shanks, filters, GT51 drill rods, drill bits, etc.); additional drill rods available optionally Blast hole drilling rig, new engine approx. 1,490 hours ago, old engine – still functional is included (increased crankcase pressure = piston rings worn), incl. pallet with spare parts (5 hammer insertion ends, filter, GT51 drill pipe, drill bits etc.), optionally more drill pipe available
SPECIFICATIONS: Table dimension mm: 1600 x 500 Number of spindles: 21 + 3 (accessory head) Wheelbase between each spindle mm: 32 Max. drilling depth mm: 90 2 workpiece clamps Installed capacity: Hp 2.5 Pneumatic tilting device of the unit from above to the horizontal
Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy
Various sizes and designs, see pictures. Auction-ID: A1-50529-204
Various sizes and designs, see pictures. Auction-ID: A1-50529-203
bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 220 mm : 425 mm table surface area: 700 x 210 mm connected load frequency: V max. distance between table and spindle-nose: 470 mm total power requirement: 1,5 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,2 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan
bore capacity in steel (diameter): 23 mm throat: 300 mm bore stroke: 150 mm table-size: 300 x 410 mm spindle taper: MK 2 total power requirement: 1,4 kW weight of the machine ca.: ca. 315 kg dimensions of the machine ca.: ca. 700 x 900 x 1900 mm Machine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-49889-217
including: deep hole drilling, Auction-ID: A1-44050-268
Maximum drilling capacity in steel/casting 63/80 mm The maximum drilling diameter in steel 300 mm leadership Maximum distance spindle axis to the leadership mantle 2000 mm Vertical adjustment arm 950 mm spindle speed - The number of stages 16 - Range from 11 to 2000 /min Main engine power of 5.5 kW Total input 8,5 kVA Weight 7100 kg
number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
of which: TR14/TR19 Auction-ID: A1-44050-223
Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5
- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)
table surface area: 170 x 170 mm base plate surface area: 170 x 170 mm throat: 185 mm quill stroke: 65 mm spindle turning speed range: 500 / 896 / 1473 / 2428 U/min column diameter: 65 mm total power requirement: 0,37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- technically efficient, ready to work - after full service - 4-spindle - bumpers (right + left)
Various insert drills, milling and thread tapping. Auction-ID: A1-49889-27
Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t
Various sizes and designs, see pictures. Auction-ID: A1-50529-202
Key data: 30 mm
Specifications: Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 – 2240 rpm Spindle motor 1.1 / 1.6 kW Radius approx. 320 mm
Key data: 35 mm
New drill motor 230V - Part No. TB02752
NEW drill motor with MK3 mount. Performance data according to type plate. The machine comes from a spare parts warehouse.
Includes Chicago Pneumatic Sander Auction-ID: A1-50090-163
NEW - TB08148-1 - Electronics 230V from spare parts warehouse.
NEW electronics 230V - TB09050-1 - from spare parts warehouse
NEW - Electronics 230V - from spare parts warehouse.
NEW - Electronics 230V from spare parts warehouse.
Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.
Inv. Num. : 7365 Type: B3N-6000 Producer: TBT Tiefbohrtechnik Created: 1991 Parameters: Control system: Siemens Maximum turning diameter: 8.5-63.5 mm Spindle power: 270 kW Bed length: 17000 mm Maximum drilling length: 8000 mm
Dowel drilling machine DORNBURG Type: DDBP incl. 5-fold gear drill chuck Rotatable drilling unit Support table height adjustable and swivel from -20° to +30°. Motor power 1.5 KW Pneumatic workpiece holder automatic pneumatic drill feed incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.
SPECIFICATIONS: Number of drill bits: 29 - Quick release Drilling distance mm: 32 Pneumatic operation Vertical/horizontal tilt: 0°-90° Installed capacity: KW 2.2 04 Workpiece clamping hounds With angle drill
Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)
Various sizes and designs, see pictures. Auction-ID: A1-50529-205
Equipped with pneumatic clamping Auction-ID: A1-50090-76
maximum number of results exceeded
please refine your search
10 € 
