be used for sale

Transnorm belt conveyor belt conveyor belt flap belt Smart Sort GF 1450-800-700 RA2037 Technical data: Conveyor length (NL): 1450 mm frame width (NB): 800 mm, 150 with motor Belt width (GuB): 700 mm headroom (BH)/transfer height : 800 mm Conveying speed (v m/s): 1.47 Drive: SEW gear motors, with brake at angle adjustment Electrical data: 50Hz V380-500, kW 0,37 drive belt and 2,2 drive angle height of sorting out bottom: 500 mm sorting height top 1200 mm Angle adjustment speed: 1s from min to max year of construction: 2009 Special feature / accessories: 4x proximity sensors for angle determination Optionally available: Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2009 condition: Ausstellungsstück Conveying length in mm: 1450 Nominal / outside width in mm: 800, 1150 Belt width  ...

Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fra ...

Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side  ...

Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt:KT58, will be changed Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus V ...

Transnorm belt curve conveyor left 90°-1000-800-IR900 RA2001 Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor Stand width (NB): 1000 mm Belt width (GuB): 800 mm Motor width (MB): +200 mm overall height (BH): 210 mm inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed: Please contact Drive: SEW gear motor with Movi-Mot Electrical data: 50Hz V230/400, kW 0,37 /S1 Year of construction: 1992 Included: Side guide on both sides and frame Optionally available: Suppo ...

Transnorm curved belt conveyor right 150°-780-600-IR600 RA2002 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) Motor: will be changed conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 150° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 scope of del ...

Transnorm belt curve conveyor left GF50°-740-550 IR700 RA1948 Technical data: Conveying length middle radius (NL): 851 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 200 mm Inner radius (IR): 700 mm Conveying angle: 50° degrees support feet: optionally available Conveying speed (V m/s): 0,045-1,3m/s Drive: SEW gear motor Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports: Side guide one- and both sideds Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 700 Nominal / outside width in mm: 740 Belt width in mm: 550 angle: 50° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Ampere: 1,60 Conveyor speed m / s: 0,8 scope of delive ...

Transnorm curved belt conveyor left 35°-780-600 IR600 RA1825 Make: Transnorm Running direction: 35° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm 3x 300-500V Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Features: Construction year: 2001 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 35° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 ...

Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 15000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg

Transnorm conveyor belt GF 12330-600-500 RA2072 Technical data: Conveyor length (NL): 12330 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor R27 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 12330 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0 ...

Transnorm Rising falling Incline belt conveyor with arch GF 580+1990-600-500 RA2430 Technical data: Conveyor length (NL): 2570 mm ( 580 mm arch + 1990 mm riser segment ) frame width (NB): 600 mm, 750 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 1.6 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2570 ( 580 + 1990 ) Nominal / outside width in mm: 6 ...

Transnorm belt conveyor GF 2200-1120-1000 RA2391 Technical data: Conveying length (NL): 2200 mm Framework width (NB): 1120 mm belt width (GuB): 1000 mm Framework width including Motor (MB): 1500 mm height (BH): 110 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.4-1.3 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1250 Belt width in mm: 1100 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,5-1,5 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...

Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive K ...

Transnorm curved belt conveyor left 150°-780-600-IR600 RA2017 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: will be changed Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 150° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: without supports and sid ...

Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising ...

Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed  ...

Transnorm Rising falling Incline with arch belt conveyor GF 4500+700-600-500 RA2195 Technical data: Conveyor length (NL): 5300 mm ( 4600 mm incline + 700 mm arch ) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 5300 ( 4600 + 700 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...

Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 RA2189 Technical data: Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3500 ( 2200 + 1300 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type:  ...

Transnorm Rising falling Incline with arch belt conveyor GF 2200+900-700-600 RA2190 Technical data: Conveyor length (NL): 3100 mm ( 2200 mm incline + 900 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3100 ( 2200 + 900 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW ...

Transnorm belt conveyor GF 4900-700-600 RA2185 Technical data: Conveyor length (NL): 4900 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DRE90M4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2185 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4900 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Ampere: ...

Transnorm conveyor belt GF 3800-700-600 RA2182 Technical data: Conveyor length (NL): 3800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s ...

Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in to ...

Transnorm belt curve conveyor 90° helix spiral left 980-800 IR600 RA2044 Technical data Manufacturer: Transnorm Type: Belt curve 90° left Year of manufacture: 1995 angle: 90 running direction: left inner radius (IR): 600 mm useful width (NUB): 800 mm nominal/external width (NB): 980 mm Pitch: 180 mm/ 90°, 720 mm/ 360° Conveying speed (m/s): with frequency converter freely adjustable between 0.0117 and 0.5167Electrical data: 1.5 kW / S1, 380-500 V Scope of delivery: without supports and side guides (please inquire if required) including frequency converter new belt optional: supports side guides Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: condition: very good (used) scope of delivery: including Movimot frequency converter, inklusive neuem Gurt, without supports and side guides Driven: YES Nominal / inner radius in mm: 600 angle: 90° Belt width in mm: ...

Transnorm curved belt conveyor right 35°-780-600 IR600 RA1825 Make: Transnorm Running direction: 35° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm 3x 300-500V Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Features: Construction year: 2001 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 35° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Transnorm curved belt conveyor left 65°-780-600-IR600 RA2000 Technical data: Manufacturer: Transnorm Year of manufacture: 1990 Condition: good (used) Motor: fully functional conveying angle: 65 nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 510 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1990 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 65 Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: ...

Transnorm belt conveyor GF 4080-1310-1200 RA1862 Technical data: Conveying length (NL): 4080 mm Framework width (NB): 1310 mm belt width (GuB): 1200 mm height (BH): 120 mm Side guides height: 100 mm Drive: SEW Motor Electrical data: 50Hz V380-500, kW 0,55 Side guides on both sides: includet Abrasion edge occurred during testing, see photos. Base layer intact. Optionally available: Supports Frequency Converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 4080 Nominal / outside width in mm: 1310 Belt width in mm: 1200 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: including side guides without supports For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and i ...

Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides frequency inverter Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 40° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,92 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing  ...

Belt conveyor slider 1900-300-1050 Make: Transnorm like new, showroom machine Year 2018 Length:1900 mm Belt width: 300 mm Stand dimensions: 790x480 mm Current conveyor belt height: 1050 mm Adjustable foot height: 100 mm Maximum ejection width: 890 mm Belt conveyor speed: 0,03-1,487m/s Electrical data Completely wired with sensors, direct wiring in the control box Belt conveyor motor data: V300-500, kw 0,75/S1 with frequency converter Ejection motor data: V300-500, kw 0,11-1,1/S1 with frequency converter and Brake Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Belt width in mm: 300 Conveying length in mm: 1900 Antrieb: SEW Getriebemotor mit MOVIMOT Foot plates: 790x480 Conveyor speed m / s: 0,03-1,487 Bauhöhe in mm (BH): 1050 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be  ...

Transnorm curved belt conveyor left 65°-780-600 RA1827 Make: Transnorm Running direction: 65° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V 220/380 Conveying speed: 0,78m/s Height frame: 210 Scope of delivery: without supports (please enquire if required) Features: Construction year: 2001 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 65 Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,00, 1,75 Conveyor speed m / s: 0,78 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG ...

Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1500 mm Control: Heidenhain 355 weight max.: 10 t head swivability: ° : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.

Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Conveyor belt width: 105mm, drive motor power: 0.37kW, installation dimensions: 1600x1380.5mm, height: 725mm. Includes operation and maintenance manual, conveyor belt, guide frame, feet, drive motors, power supply and additional elements. With extensive documentation, the machine is completely dismantled. An on-site inspection is possible. The conveyor belt can be assembled in various ways.

This 2015 TOMSA DESTIL Alcohol Dehydration Plant is designed for the large-scale production of high-purity ethanol. It processes distilled alcohol (95.5% v/v) into dehydrated alcohol with up to 99.8% v/v concentration, suitable for beverages, industrial applications, or biofuel. The plant has a nominal capacity of 90,000 liters per day and operates with advanced molecular sieve technology using pressure swing adsorption (PSA), ensuring high efficiency, low energy consumption, and fully automated operation. Condition & Usage The plant was barely used and only produced 2,000 m³ of dehydrated alcohol during its operation, leaving the equipment in excellent condition. Key Features - Capacity: 90,000 L/day dehydrated alcohol (99.8% v/v). - Feedstock: Distilled alcohol at 95.5% v/v. - Technology: Molecular sieve dehydration with PSA system. - Fully automated and continuous operation. Fi ...

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm turning speed range: 25 - 2.000 U/min power capacity: 4 kW feed: 5 - 500 m/min rapid traverse: 1,5 m/min work table:: 1.000 x 700 tool taper: SK40 weight: 1,8 t dimensions of the machine ca.: 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display with scales is defective. Extra interchangeable milling head. No accessories. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible.

Pipe bending machine Type: Gigalus 130 S Producer: Mewag Year: 2014 bending and shaping of 3D pipes with a diameter of min. 40mm and wall thickness min. 4mm. Based on CAD drawings, it converts the exact shaping of pipes into the final form, including the simulation of bending angles. Engine power: 40kW max.radius: 450mm bending accuracy: +/- 0.2 degree length accuracy: +/- 0.5 mm Machine in good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.36 m, Overall length= 1.65 m, Overall width= 3 m, Net weight= 300 kg,

Height=1.44 m, Overall length= 1.15 m, Overall width= 2.6 m, Net weight= 220 kg,

max. wheel diameter: 400/500 mm CNC-Control: GE FANUC Series 160i-M pinion diameter - max.: 400 mm crown gear diamter max.: 500 mm x-axis: +/- 70 mm y-axis: 200 mm z-axis: 200 mm axis angle: 90 Grad speeds:: R 0 - 3000 / T 0 - 5000 1/min rated current: 30 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,2 x 2,5 x 2,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20.0 t stroke: 185 mm flat steel: 200 x 12 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 480 x 1060 mm total power requirement: 2.2 kW motor: 400 Volt 50 Hz oil volume: 12.0 ltr. weight: 530 kg range L-W-H: 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 18.0 mm throat: 190 mm bore stroke: 80 mm morse taper: 2 Kurzspindel MK turning speeds: 225 - 4.300 U/min voltage: 400 / 50 Hz Volt table:: 300 x 240 mm column diameter: 65 mm engine output: 0.37 / 0.55 kW weight: 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mm band length: 2000 mm band speed: 343.0 mm/sek grinding width: 530 Plantisch mm table height: 475 - 1240 mm total power requirement: 3.0 kW weight of the machine ca.: 100 kg range L-W-H: 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction The data for thi ...

width of the strips: 45.0 mm band length: 850 mm band speed: 8.0 m/sek. voltage: 230 V total power requirement: 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.