be used for sale

: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degree ...

Pneumatic folding bending machine FASTI Type 606 - 11 - 1.0Folding machine for sheet metal folding pre-bendingFor making a fold bendFolding bending machine for thin sheet metal instead of press brakeFabr. No. 9166002 year of construction 1991Working length: 1100 mmMaterial thickness at 45 kg/mm² 1 mmCompressed air requirement 6 bar- pneum. Foot switch roller infeed via threaded toggle screwsSpace requirement L x W x H 1600 x 300 x 1050 mmWeight approx. 250 kggood conditionThe fold is the doubling of the sheet metal in the edge area, i.e. 1x folded around the

Roller sets for profile bending machine HERKULES WETZLARThe rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N for 3-roll ring bending machine, also come from such a machine.Shaft diameter 80/60 mmRoller diameter 160/180 mmRoller width max 180 mmThe machine had 2 driven rollersWeight of all rollers approx. 100 kggood condition; used

Double-sided grinding and polishing bench MEYER type SMPMasch. No. 848 Year of construction 1963Shaft diameter 50 mmGrinding wheel holder 305 mmDisc spacing 1470 mmGrinding-polishing wheel diameter max. 800 mmWorking height 550 mmSpeed 710 / 800 / 950 rpm. Drive power 2x 3 kWNet connection 380 volts, 50 Hz.- two drive motors for each working side separately- star-delta switch for each drive motor separately- speed change by folding the drive belt- dust extraction flange 100 mm-

Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

Sliding Belt Magnetic Conveyor, Magnetic Slide Conveyor GÖSSLING Z-Conveyor, Sliding Belt System, Conveyor Belt, Magnetic Belt ConveyorMasch. No: 21113628 02 / 2053405 60 Year of construction 2002 / 2016 overhauledSlide width 255 mmDistance of permanent magnets 270 mmInsertion length approx. 1000 mmInsertion height 200 mmSlide-in width 390 mmConveying height - discharge height approx. 1000 mmConveying speed approx. 15 meters/min. Motor power belt drive approx. 0.55 kWNe-connection 400 volts, 50 Hz- Circulating chain equipped with permanent magnets- Overall height

Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used

Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

OFFER - KRÜSIMATIC from Krüsi G1 4 axis system 1 used carpentry machine from KRUeSI type Kruesimatic G1 Year of manufacture 2005 Can be operated with all carpentry programs such as Catwork, SEMA, Lockrichs, S & S, Nut Reiner, etc. 4 axis system with dovetail cutter Task / Editing from right to left 6 Side processing without having to turn the wood! Total length approx. 18 m Weight 5.5 t BTL controlled for interface to the office or of course manual input on the machine. To increase the cutting performance, the feed rate is frequency-controlled and can be optimized for many cross-cut cuts Platform height without floor shaft 920 mm Sections fall into mobile box incl. chips The system only needs to be connected to the electrical cabinet with plugs Max. wood cross-section - 200mm x 320 mm Plant set up and ready for demonstration Available IMMEDIATELY The entire system ha ...

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

• Suitable for drying and granulation (intended for preparations for in vitro diagnostic use) • Batch operation • Peristaltic pump for spray liquid • Top spray nozzle for spray liquid • Scales • Product container volume 24 L • Batch volume max. 16 L • Batch weight 1-8 kg (depending on product) • Product suction lance from Müller barrel • Conical transition piece for emptying into Müller barrel • Heating register • Star filter for separating product and air flow • Inflatable seals • Product temperature max. 85°C • Explosion-proof container • Max. explosion pressure 10 bar • ATEX Zone 20 inside the mixer (according to conditions in 2010) • Equipment category 1 according to Directive 94/9/EC • Equipment group II, D (dust) • Protection class IP 5x • Max. surface temperature 180°C • Operator terminal MP 277 Touch • Process data acquisition with ...

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

1 used WEINMANN Gebertisch, built in 2022, as good as new, For now.. without control, as this remains in the overall production control. Control is about 6000 euros new from Weinmann. Size 12 x 3 m - Model BuildteQ A 570.. Sale as seen from site without warranty, dismantling is helped with overhead crane and forklift free of charge without warranty.

Transnorm belt curve conveyor left GKF 90°-700-500-IR750 - NEW with STORAGE MARKS (RUST) RA2418 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 750 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,25 m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2017 Condition: unused, but has marks from storage, as can be seen in the photos Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2017 condition: neu mit Lagerspuren Nominal / inner radius in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Runni ...

Transnorm belt conveyor GF 25000-1000-900 RA2416 Technical data: Conveyor length (NL): 25000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 25000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

Transnorm conveyor belt GF 14800-700-600 RA2196 Technical data: Conveyor length (NL): 14800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 or 0,42 Drive: SEW gear motor, R27 DT80N4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 14800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor sp ...

DAVI MCA 1513 4-roll plate rolling machine was built in 2023 in Italy by Promau S.r.l.. This highly efficient machine is the perfect choice for precision rolling of cylindrical, elliptical and conical forms. Sheet metal with a maximum thickness of 6,5 mm is machined fully automatically by four rollers, which are driven by planetary gears. In turn, the advanced control system allows, among others, the generation of a full programme from CAD files and an offline performance test. The offered DAVI MCA 4-roll plate bending machine is a guarantee of achieving repeatable parts of the highest quality. Technical specifications of the DAVI MCA 1513 plate rolling machine - number of rollers: 4 - maximum sheet metal thickness (mild steel, yield point 260 MPa): 6,5 mm - maximum sheet metal length: 1500 mm - control system: DAVI - motor power: 5.5 HP - power supply of the MCA 1513 machine: 4 ...

K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg

Interroll Rising falling Incline belt conveyor with leading belt GF 4778 (3888+890)-690-580 RA2365 Technical data: Conveyor length (NL): 4778 mm ( 3888 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4778 (3888+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type:  ...

Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366 Technical data: Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 7028 ( 6138 + 890 ) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine ty ...

Interroll Rising falling Incline belt conveyor with leading belt GF 19782 (810+175+17907+890)-690-580 RA2363 Technical data: Conveyor length (NL): 19782 mm ( 810 + 175 mm arch + 17907 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 19782 ( 810 + 175 + 17907 + 890 ) Nominal / outside wi ...

Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...

FAS discharge flap belt conveyor GF 1380-800-600 RA2419 Technical data: Conveyor length (NL): 1380 mm (800 mm conveyor belt + 580 mm flap) Frame width (NB): 800 mm Belt width (GuB): 600 mm Construction height (BH): 435 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.25 lifting and 0.37 conveyor belt Side guide distance: 655 mm Maximum recommended package size: 600 x 450 mm Optionally available: Supports to increase the delivery height Frequency converter Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1380 Nominal / outside width in mm: 800 Belt width in mm: 600 Driven: YES Engine type: SEW Getriebemotor KW: 0,25/S1, 0,37/S1 scope of delivery: including side g ...

used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Transnorm belt conveyor 985-600-500 RA2420 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW Gear-drive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 0,8 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1999 condition: good  ...

used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Transnorm belt conveyor 1905-600-500 -- with new belt RA2422 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1905 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Weight: 60 kg Scope of delivery: including new belt with order Optional: supports Side guide Frequency converter for continuous speed control We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG ...

Transnorm belt conveyor 820-600-500 RA2421 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 820 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1999 con ...

Transnorm belt conveyor 800-600-500 RA1986 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 2,8 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...

Transnorm conveyor belt GF 1000-600-500 RA2423 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...

Inv. Num. : 8602 Type: W 9 Producer: TOS Created: 1975 Parameters: Work table length: 950 mm Work table width: 950 mm Maximum weight of the workpiece: 3000 kg Spindle diameter: 90 mm Maximum spindle speed: 1800 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Machine weight: 11000 kg Equipment: DRO

Technical data of the steel girder: Manufacturer: Stow Type: Pal Rack NS The scope of delivery includes: 01x Steel beams, used Material colour: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Overall length: 3,835 mm Note: The steel girders were attached to a length of between 2,700 - 2,800 mm welded on a plate. (Dimensions: approx. 200 x 110 x 50 mm (LxWxH) Since these are second-hand goods, scratches, damage, welds or rust roots! General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 1090 mm Nominal/outer width (NB): 630 mm Belt width (GB): 500 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 1090 Nominal / outside width in mm: 630 Belt width in mm: 500 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpa ...

FAS belt conveyor 850-530-400 RA2427 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 850 mm Nominal/outer width (NB): 530 mm Belt width (GB): 400 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 850 Nominal / outside width in mm: 530 Belt width in mm: 400 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartn ...

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

The scope of delivery includes: 01x Rectangular tube, used Material colour: orange Overall length: approx. 1,980 mm Center – center hole: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (WxH) Material thickness: approx. 2.00 mm Borehole Ø: 9 mm Weight: 5.04 kg | Pcs. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Transnorm belt conveyor belt conveyor belt flap belt Smart Sort GF 1450-800-700 RA2037 Technical data: Conveyor length (NL): 1450 mm frame width (NB): 800 mm, 150 with motor Belt width (GuB): 700 mm headroom (BH)/transfer height : 800 mm Conveying speed (v m/s): 1.47 Drive: SEW gear motors, with brake at angle adjustment Electrical data: 50Hz V380-500, kW 0,37 drive belt and 2,2 drive angle height of sorting out bottom: 500 mm sorting height top 1200 mm Angle adjustment speed: 1s from min to max year of construction: 2009 Special feature / accessories: 4x proximity sensors for angle determination Optionally available: Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2009 condition: Ausstellungsstück Conveying length in mm: 1450 Nominal / outside width in mm: 800, 1150 Belt width  ...

Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fra ...

Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 670 Belt width in mm: 600 angle: 109° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 1,0 scope of delivery: without supports and side  ...

Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt:KT58, will be changed Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus V ...