134,810 used machines on RESALE, but how to find them? Machine Search
tapered roller bearings -Weight: 7250 g -Outer diameter: 230 mm -Width: 40 mm -Inner diameter: 130 mm
Key data: 220 t, 4000 mm
with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.
Container turning station with belt conveyors possible for different containers very good condition
tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm
tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 60 mm -Outer diameter: 110 mm -Width: 29.75 mm -Weight: 1.3 kg
spherical roller bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 50 mm -Outer diameter: 90 mm -Width: 23 mm
Spherical roller bearings, self-aligning ball bearings -Bore: Ø 80 mm -Outer diameter: 140 mm -Width: 33 mm -Weight: 2.1 kg
Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Nord KW: 0,25/S1 Ampere: 0,9 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides ...
used
Key data: 200 mm, 1 mm, 200 mm
Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.
self-aligning ball bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 30 mm -Outer diameter: 72 mm -Width: 27 mm -Weight: 0.5 kg
self-aligning ball bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 35 mm -Outer diameter: 80 mm -Width: 31 mm -Weight: 0.65 kg
used
self-aligning ball bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 40 mm -Outer diameter: 90 mm -Width: 33 mm -Weight: 4.7 kg
plate length: 1550 mm plate thickness: 3,5 mm number of rolls: 3 roll diameter: 120 mm total power requirement: 2,2 kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 2,2 x 1,5 x 1,6 m Electrically operated round roller via foot lever, Sturdy, welded construction stand, Rear roller adjustable for conical bending, Rollers are hardened, Top roller can be swivelled to remove the workpiece. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cylindrical roller bearings -Type: NJ 206 -d: Inside: 30 mm -D: Outer: 62 mm -B: Width: 16 mm -Quantity: 50x cylindrical roller bearings available -Price: per piece -Weight: 0.2 kg/piece
Cylindrical roller bearings -Type: NU 204 E -d = Inside: 21 mm -D = Outer diameter: 46 mm -B = Width: 13 mm
Cylindrical roller bearings -Type: NUP 2314 -d = Inside: 70 mm -D = Outer: 150 mm -B = Width: 51 mm -Weight: 4.75 kg
Cylindrical roller bearings -Outer diameter: 72 mm -Inner diameter: 35 mm -Width: 23 mm
calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800
self-aligning ball bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 19 mm
Cylindrical roller bearings -Outer diameter: 130 mm -Width: 31 mm -Inner diameter: 60 mm -Weight: 1.9 kg -Number: several available
Cylindrical roller bearings -Outer diameter: 140 mm -Width: 33 mm -Inner diameter: 65 mm
Cylindrical roller bearings -Outer diameter: 150 mm -Width: 35 mm -Inner diameter: 70 mm
used
Key data: 2000 mm, 1 mm, 2000 mm
Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.
Eillert G1500 belt slicer stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt widths: 15 mm -Length: 400 mm -Adjustable speed: 14-56 m/min -Number: 2x conveyors available Price: per piece -Weight per piece: 88 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Up-down sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x Bottom unit 2×5.5kW 2x top chiller 2×5.5kW Sweeping brush top and bottom' 2×0.55kw Adjustable feed on the inverter 4-16m/min Electric grinding height adjustment Ability to work in-line with other machines CE Certified Year of production 2001
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg
Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg
Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 70 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 250 mm -Weight: 15 kg
pressure: 20 t stroke: 200 mm table-size: 550 x 550 mm working speed:: 10 mm/ sec. work height max.: 940 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200 x 10 mm weight: 650 kg dimensions: 1,1 x 0,6 x 1,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...
Bezel, steady rest, lynette -Bezel: max. passage O 90 mm -Center height: 155 mm -Condition: Gunmetal -technical drawing: with the photos -Dimensions: mm -Weight: 6kg
plate thickness: 1,25 mm throat: 130 mm roll diameter: mm total power requirement: 0,75 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch - Footswitch - 8 pcs. Roll sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bezel, setting stick, lynette -Max. passage: Ø 70 mm -Peak height: 250 mm -Weight: 10 kg
Bezel, setting stick, lynette -Max. passage: Ø 70 mm -Peak height: 200 mm -Drawing with the photos -Weight: 8 kg
Counter support, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Dovetail: 144 x 184 mm, 30 mm high -Drawing with the photos -Dimensions: 270/130/H195 mm -Weight: 12 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg
ID3345 Landbanden/Country conveyor belts year/Baujahr 2015 Land conveyor system consisting of: x 1400 mm x 190 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h 1 x 1400 mm x 165 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h Land conveyor system consisting of: 1 x 1400 mm x 190 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h 1 x 1400 mm x 165 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg
Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 70 mm -Edition: Brass -Hole spacing: 295 mm -Peak height: 135 mm -Weight: 4 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm -Length: 3500 mm -Weight: 70 kg
Specifications: - Load capacity 8 t - Usable height 620 mm - Total height 780 mm - 4 pieces of load pick-up double hooks adjustable - Grid distance adjustment double hoes 100 mm - Truss beam IPE 240 - Total length approx. 2000 mm - Total width approx. 1050 mm - Weight approx. 350 kg
Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V
Transnorm conveyor belt GF 21100-700-600 RA2204 Technical data: Conveyor length (NL): 21100 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 21100 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s: 0,42 scope of delivery: ...
Transnorm curved belt conveyor left bend 45°-800-700 IR900 RA2145 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjustab ...
Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992
maximum number of results exceeded
please refine your search
