be used for sale

Transnorm curved belt conveyor right 90°-800-600-IR600 RA2162 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in  ...

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Centre height: 145 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 400/130/H380 mm -Weight: 13 kg.

V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm -Hole: Ø 32 mm -Weight: 29.5 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 6-groove pulley -Art.No.: 168-06-00041000 -V-belt width: 13 mm -Mounting: Ø 38 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 105 x 95 mm -Weight: 3.6 kg/piece

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Evacuators/ Infeeders/ Conveyor systems Manufacturer: Budde Year of construction: 2011 Condition: Good (Used) Colour: Blue -galvanized Total length: approx. 2500 mm Short side (ejector) : approx. 780 mm Total width incl. motor: approx. 1300 mm Straps: 18 pieces - approx. 40 mm wide Conveying width: approx. 1000 mm Stock: 2 pieces Including SEW motor (1.1 KW) Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading y ...

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: conveyor belt belt conveyor -Speed: 9 m/min -Belt width: 440 mm -Conveyor length: 1375 mm -Drive: 0.18 kW, see photo nameplate -Transport dimensions: 1780/530/H240 mm -Weight: 42 kg

Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co.  ...

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: conveyor belt belt conveyor -Speed: 9 m/min -Belt width: 440 mm -Conveyor length: 1135 mm -Drive: 0.18 kW, see photo nameplate -Transport dimensions: 1230/530/H240 mm -Weight: 34 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 30 mm / height 64 mm -Dovetail: 174 to 145 mm 22 mm high -Dimensions: see technical drawing in the photos -Dimensions: 235/67/H115 mm -Weight: 4.7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, length 2020 mm -Tool angle: radius 5 mm -Dimensions: see drawing in the photos -Dimensions: 2020/27/H95 mm -Weight: 23.4 kg

TRIO-Technik belt conveyor GF 2530-940-840 RA1962 Technical data: Conveyor length (NL): 2530 mm stand width (NB): 940 mm Belt width (GuB): 840 mm Overall height (BH): 85 mm Adjusted height: 630 mm Support feet: 2 pieces Conveying speed (v m/s): 0,078 Electrical data: 50Hz V380-500, kW 0,18 / S1 Belt: Green, smooth Year of manufacture: 10/1997 Optionally available: Frequency converter Features: Construction year: 1997 condition: good (used) Conveying length in mm: 2530 Nominal / outside width in mm: 940 Belt width in mm: 840 Driven: YES KW: 0,97 Conveyor speed m / s: 0,078 scope of delivery: including supports and side guides For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Son ...

Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 1,6 scope of de ...

Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...

Transnorm belt conveyor 650-600-500 RA2194 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1998 Condition: good (used) Motor: fully functional conveying length (FL): 650 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Gearmotor Motor power: kW 0.37 230/400 V 50Hz Conveying speed: contact us Weight: 80 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 650 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktie ...

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: conveyor belt belt conveyor -Speed: 51 m/min -Belt width: 340 mm -Conveyor length: 6630 mm -Drive: 0.75 kW, see photo nameplate -Transport dimensions: 6735/600/H285 mm -Weight: 180 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / Height 70 mm -Dovetail: 90 to 74 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 133/60/H135 mm -Weight: 4.2 kg

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Plating: Brass -Dimensions: 170/80/H275 mm -Weight: 2.9 kg

SOCO RA2029 Technical data: Conveyor length (NL): 2010 mm Framework width (NB): 670 mm belt width (GuB): 580 mm height (BH): 110 mm support feet: optionally available Conveying speed (v m/s): 0,33 Drive: gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2010 Nominal / outside width in mm: 670 Belt width in mm: 580 Driven: YES Engine type: Nerimotori KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,333 scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of ...

Dematic Heavy duty Belt Conveyor GF 1520-760-650 RA2027 Technical data: Conveyor length (NL): 1520 mm Framework width (NB): 760 mm, 1110 mm with motor and movi mot belt width (GuB): 650 mm height (BH): 140 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1520 Nominal / outside width in mm: 760, 1110 Belt width in mm: 650 Driven: YES Engine type: SEW Movi-Mot KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,025 - 0,883 scope of delivery: without supports and side guides, includ ...

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 5550 ( 4750 + 800 ) Nominal / outside width in mm: 885 Belt width in mm:  ...

Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,445 t dimensions of the machine ca.: 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 147 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 165/65/H42 mm -Weight: 2.2 kg/piece

Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 167/56/H43 mm -Weight: 2.2 kg/piece

Bezel, steady rest, lynette -Bezel: max. aperture Ø 168 mm -Centre height: 275 mm -technical drawing: in the photos -Dimensions total: 540/100/H610 mm -Weight: 41 kg

USED TETRA PAK TBA 19 250ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-188 Category Tetra Pak TBA 19 1-TBA 19 250ml Slim Filling Machine, Year of manufactitng 1999, Version 10v, Speed 7500 PPH 2-Tetra Pak Straw Applicator TSA 46, Year of manufacturing 1997 3-Tetra Pak Cardboard Packer TCBP 70 4-Tetra Easy Ride 5-Conveyors and Paper trolly Condition: Still on production and Tetra pak maintained.

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Dimensions: 220/195/H340 mm -Weight: 8 kg

Bezel, moving bezel, steady rest, lynette -Bezel: max. aperture Ø 145 mm -Centre height: 190 mm -technical drawing: in the photos -Dimensions total: 310/115/H340 mm -Weight: 21.6 kg

Flat belt pulley, belt pulley, drive pulley, roller pulley -Pulley: Flat belt pulleys 7 pieces -Width 70 mm -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions box: 430/210/H115 mm -Weight: 11 kg

USED TETRA PAK TBA 19 200ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-189 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 200ml Slim Filling Machine, Version 10v, Year of manufacturing 1998, Speed 7500 PPH Tetra Pak Straw Applicator, TSA 21 Tetra Pak Packer, TCBP 70 Conveyors and Paper Trolly Condition: Good

PreviousNext BRAND NEW GABLE TOP FILLING LINE FOR SALE Item #: Usm-195 Category Gable Top Machines Brand New Gable Top Filling Machine, Speed 3000 Pack Per Hour, Filling Volumes 200ml to 1000ml, Year of manufacturing 2023, Pack Type B 70x70, Cold and Hot both Filling Possible, UV Sterile System and Hydrogen Per Oxide Sterile and Alcholic Sterile. Suitable for Milk, juices, Cream and yogurt, Expiry Date Hot Stamping also instaled, Cap feeder, Lifter and Cap Applicator Also installed. Cap Applicator Made by Branson USA. Air Compressor also included, PLC Brand Inovance

USED GEA TOMATO PASTE PASTEURISER 1400 LPH FOR SALE Item #: Usm-190 Category UHT Plants Gea tomato paste pasteuriser 700-1400 LPH, Year of manufacturing 2013, Tubular type, Indirect heat treatment, Suitable to feed 1 separate filling machine, Product Information for Tomato paste: max. viscosity 10 cp / 10°C max. 24-26 Brix° Plant condition: Excellent

Bezel, setting stick, lynette -Bench: for crankshaft grinding machine -Peak height: 170 mm -Dimensions: see photos -Dimensions: 205/115/H220 mm -Weight: 11.1 kg

USED TETRA PAK CAP APPLICATOR 45 Item #: Usm-191 Category Cap Applicator USED TCAP 45 for 1000ml Prisma Packs is available for sale. Year of manufacturing 2005 and working hours 10532 Condition: Good

Transnorm conveyor belt GF 8500 -600-500 RA2088 Technical data: Conveyor length (NL): 8500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 8500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...

USED TETRA PAK STRAW APPLICATOR TSA 21 FOR SALE Item #: Usm-192 Category Straw Applicator Used Tetra Pak Straw Applicator for sale Model: TSA 21, Straw Type: U Shape 200ml Slim, Year of manufacturing 2005, working hours 14300

SOCO RA2028 Technical data: Conveyor length (NL): 1470 mm Framework width (NB): 670 mm belt width (GuB): 580 mm height (BH): 110 mm support feet: optionally available Conveying speed (v m/s): 0,33 Drive: gear motor Electrical data: 50Hz V380-500, kW 0.12 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1470 Nominal / outside width in mm: 670 Belt width in mm: 580 Driven: YES KW: 0,12 Conveyor speed m / s: freely adjustable, 0,333 scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look for ...

USED TETRA PAK A3 FLEX 1000ML PRISMA FILLING LINE FOR SALE Item #: Usm-193 Category Tetra Pak A3 CF/Flex A3 Flex 250ml Slim and 1000ml Prisma Filling Line For Sale A3 Flex 250ml Slim filling machine with 1000ml Prisma Volume change kit, Version 100v, Speed 7000 PPH Straw applicator TSA 21 Cap applicator 45 for stream cap Tetra Pak packer TCBP 70 Tetra Film wrapper 67 eady ride and conveyors paper trolly Condition: Good

Conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt -Conveyor belt: conveyor belt -Width: 580 mm -Length: 11165 mm -Transport dimensions: 580/340/H220 mm -Weight: 10.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: Item No.: 12 00 00 204 RT8 -Profile diameter: 25 mm / 1 -Dimensions: see photos -Dimensions: 175/140/H82 mm -Weight: 3.8 kg

SBF grading machine model 3W-586 1100mm with 3 belts: - 1st roller belt D=150mm in 90 shore rubber - 2nd roller belt D=200mm in 65 shore rubber - 3rd roller belt D=200mm in 45 shore rubber - pneumatic on/off of the 3 rollers, from the control panel - Rubber pressure rollers - automatic table positioner, with digital reader - Feed mat in good condition - 2 belt feed speeds - front and rear roller conveyor - total installed power KW 24 , volt 380 - year 1997 , CE standards AVAILABILITY FROM APRIL 2024

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 47 mm -Mounting: Ø 33 mm -Dimensions: see photos -Dimensions: Ø 125 x 84 mm -Weight: 4.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: mm -Hole: Ø 20 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 163/82/H98 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 22 mm -Dimensions: see photos -Dimensions: Ø 102 x 113 mm -Weight: 4.0 kg

- Camshaft Support Bearing housing MWM 12302303 - Suitable for several motors - Please note! Price per piece! - 12302303 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 3/4 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 110/75/H55 mm -Weight: 1.5 kg

Long belt sander Hunziker (Ref. No. 517-2697) Format: 2.5 x 1.2 m L x W x H: 5.0 x 2.0 x 1.7 m Weight approx. 480 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 91/63/H51 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 15 mm -Dimensions: see photos -Dimensions: 130/65/H65 mm -Weight: 1.3 kg