be used for sale

Description KVX 3.100 Coal Pusher Set Becker Art. No. 90140200004 Set (4 pieces)

Description KVX 3.100 Clutch Disc Becker Art. Item No. 90221000000 Set (4 pieces)

Description KVX 3.100 Bearing Becker Art. Item No. 90662000000 Set (4 pieces)

Description KVX 3.140 Gasket Set Becker Art. No. 54900021300 Set (1 piece)

Description KVX 3.140 Filter Cartridge Becker Art. No. 90950701000 Set (4 pieces)

Description KVX 3.140 Filter Cartridge Item No. 90951400000 Set (2 pieces)

Description KVX 3.140 Coal Slide Set Becker Art. No. 90132400004 Set (2 pieces)

Description KVX 3.140 Clutch Disc Becker Art. No. 90221000000 Set (2 pieces)

Description KVX 3.140 Bearing Becker Art. No. 90662100000 Set (2 pieces)

Description KVX 3.140 Bearing Becker Art. No. 90666400000 Set (2 pieces)

Description SV 201 Filter Cartridge Becker Art. No. 90951070000 Set (2 pieces)

Description SV 201 Bearing Becker Art. No. 90661660000 Set (2 pieces)

Description SV 201 Bearing Becker Art. No. 90661670000 Set (2 pieces)

Description SV 400 Filter Cartridge Becker Art. No. 90951030000 Set (2 pieces)

Description SV 400 Bearing Item No. 90951030000 Set (2 pieces)

Description Becker DVTLF 250 from 2008 dry running rotary vane vacuum pump Manufacturer: Becker Type: DVTLF 250 Motor: 400V/50Hz Suction power: 250m³/h Final pressure: 200mbar (abs.) corresponds to 90% vacuum

Description VXLF 2.250+DXLF 2.250 Gasket Set Becker Art. No. 54900052200 Set (2 pieces)

Description VXLF 2.250+DXLF 2.250 Filter Cartridge Becker Art. No. 90951000000 Set (8 pieces)

Description VXLF 2.250+DXLF 2.250 Filter Cartridge Becker Art. No. 90951200000 Set (4 pieces)

Description VXLF 2.250+DXLF 2.250 Charcoal Slide Set Becker Art. No. 90132500005 Set (4 pieces)

Description VXLF 2.250+DXLF 2.250 Clutch Disc Becker Art. No. 90664900000 Set (4 pieces)

Description VXLF 2.250+DXLF 2.250 Bearing Becker Art. No. 90220020000 Set (4 pieces)

Description VXLF 2.250+DXLF 2.250 Bearing Becker Art. No. 90661720000 Set (4 pieces)

General SKU033H160 LocationBarneveld MakePannevis TypeRT 0,25 x 4,0 M :Gastight: No.1348 Dimensions Filter width25 cm Filter length400 cm Main Features MaterialHastelloy Motor11 KW Surface1 m2 Specified Features - Vacuum belt filter Vacuum belt filtercheck Filter surface1,0 m² Filter width250 mm Filter length4000 mm With motor0,75 KW, 400 Volt With variable speed drivecheck Knife dischargecheck With vacuum pump(2x), make Siemens and NASH Motor± 11,0 kW (Ex) With vacuum tankcheck With liquid pump(2x) make Bungartz (in Hastelloy C4) Motor4,6 kW + 1,85 kW MaterialStainless steel 1.4539 (904L), Stainless steel 2.4610 (Hastelloy C-4) General Year of construction1996 With switchcheck With switchgear(as is) Floorspace6,7 x 1,7 m (filter) Total height1,8 m Weight4500 kg Extra SpecificationsContact parts in Hastelloy C4Remaining parts are stainless steel 1.453 ...

General SKU123X722 MakePannevis TypeRT/PT 0,25 x 2 mtr No.1645 Year of construction1994 LocationBarneveld Dimensions Filter width25 cm Filter length200 cm Main Features MaterialStainless steel Motor0.25 KW Surface0.5 m2 Specified Features - Vacuum belt filter Vacuum belt filterin pressure tight housing Filter surface0,5 m² Filter width250 mm Filter length2000 mm Number of sections:4 (3x 400 mm + 1x 800mm) With motor0,25 kW (400 V, (Ex)) With variable speed drivecheck Belt speed± 15-85 m/h Knife dischargecheck With vacuum pumpmake SIHI With liquid pumpcheck MaterialStainless steel 1.4571 (316Ti) General With switchgearDim. 1,4x0,5x2,2 m Floorspacefilter 4,0 x 2,1 m Total height2,7 m Weight8000 kg ATEX designedcheck Extra Specifications- Housing vac/6 bar, - Test pressure 11,7 barPowdered foodsStarchBiotechnologyAgrochemicalsCatalysts & fillersOrganicsPa ...

Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, DRO, elecro-permanent magnetic plate

Case Erector BEDO VA988 + Year of construction 1997 Machine no. VA 988.1.52490, serial no. 4705 Output: 20 cart./min. with automatic format change. format range: L 200-650mm W 150-460mm H 100-500mm. Carton outlet height: 600 mm Electrical data: Voltage: 400V 3 phase Frequency: 50Hz Connected load: 7.3 kVA 18 amps Operating pressure: 5-7 bar The machine is equipped with a PLC control make Siemens S 5. Machine weight: 1,500 kg machine dimensions: Length: 3000mm Depth including cardboard magazine: 2100 mm Height : 2100mm Machine weight: 1,500 kg Bottom closure with NORDSON 3400 hot-melt device. If you need more information. We are here to help! Please contact us using the contact form or give us a call

Belshaw HI18F Icer unused, 2023, Stainless, This icing machine quickly applies icing to an entire tray or pan of donuts, can ice up to 24 donuts in one swift action, tray size up to electronic temperature controller, up to 1500 donuts per hour, mobile, 1Ph

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PFP Anvil with saucer, unhewn. Weight approx. 80 kilos. see photos

Conveyor belt systems 21 or 23 according to the desired layout. For the selected asset or your existing lines. Curves, switches and drives can be adapted according to your wishes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Two Belimed cleaning and disinfection devices RDG with integrated drying are available. Washing chamber dimensions X/Y/Z: 690mm/630mm/800mm, usable volume: 350l, coarse filter: 2mm, fine filter: 1.5mm, drying temperature: 110°C, air filter: HEPA H13, separation efficiency: 99.95%, A0 disinfection value: 3000. Machine dimensions X/Y/Z: approx. 1850mm/900mm/950mm, weight: approx. 400kg. Documentation available. An inspection on site is possible.

BERNARDO URS 1000 N universal grinding machine was built in 2021 in Austria by PWA Handelsgesellschaft m.b.H. It is an extremely versatile machine for precision grinding of both cylindrical and internal surfaces with a maximum length of 1000 mm. The best machining results during even the most intensive challenges are guaranteed by the precisely aligned work head with stable grinding wheel spindle. The grinding wheel spindle features adjustable sliding bearings consisting of three segments. It is adjusted hydraulically or manually according to the operator’s needs. Movement in the X and Y axes, in turn, takes place on precision, hand-grooved guides, ensuring high accuracy and smooth movements. The BERNARDO URS 1000 N also stands out for its sturdy, heavily ribbed construction with large panels, which is resistant to temperature fluctuations and deformation. The work table can be tilt ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

ALMiG Screw compressor BELT 30-10 | 30 kW | 10 bar | Industrial quality For sale is a powerful and reliable screw compressor from the ALMiG brand (Made in Germany) – ideal for industry, production or larger workshops. Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: BELT 30-10 Year of Make: 2009 Motor power: 30 kW Operating pressure: 10 bar Volume flow: 4.12 m³/min Drive: Belt drive

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

Tool set for installing Beftec brackets in flat roofs

English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible.

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

Toast bread long-forming machine, Fabr. Benier, Type MI 600 with 4 four pieces of equipment,

Uhlmann BEC300 blister packaging line comprising B1330 blister machine, format area max. 200 x 145 mm (index x width), forming depth max. 12 mm, film width max. 160 mm, max. reel diameter of thermoforming foil 600 mm, max. reel diameter of lidding foil 300 mm, with Hapa 230-T-1C-LR digital printing machine for foils and papers from reel, C2155 intermittend cartoning machine, max. carton format 115 x 100 x 170 mm (LxWxH), pitch 140 mm, max. blister stack height 85 mm, with GUK Cartonac 91 leaflet folder, Wolke m600 inkjet printer and downstream Transnova-RUF robot Flex Line RV-400 case packer & palletiser, packaging section with infeed conveyor, magazine, erecting/loading robot, carton closing station using self-adhesive tape at the bottom and top, carton discharge with labelling system (2 carton labels at a corner position of the carton), palletising with palletising conveyor (1-3), pall ...

A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.

BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)

BEKUM BA 200 Blow Molding Extrusion Machine Type: BA 200/ S123 Year: 1990 8L Accumulator Head 1 Head and 1 Station Material Processed: PE Production Capacity: 500 kg/h Extruder Type: Accumulator Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Thickness Control: Yes Material Feed Opening Stroke: 710 mm Clamping Force: 800 kN There are 2 machines

cutting diameter: 200 mm band length: 350 mm capacity 90 degrees: round: 200 mm total power requirement: 3,0 kW weight of the machine ca.: 0,45 t dimensions: 1,4 x 1,4 x 1,3 m Automatic hacksaw - with 1000 mm infeed roller conveyor - preset counter - material stop with trigger, max. 600 mm - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU413X1254 MakeVirba LocationBarneveld TypeVSK 14,7-10-10/7,5-II Main Features MaterialStainless steel Motor0.9 KW Surface2.06 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface2,06 m² Bed sizes2750 x 750 mm Product inletø 150 mm Product outlet2x ø 200 mm Number of sections:1 Air inletø 250 mm Air outletø 400 mm Vibro motor2x Motor2x 0,90 kW, 400 V, 965 rpm MaterialStainless steel 1.4301 (304) General No.33482 Year of construction1997 Mounted on mild steel framecheck Floorspace3,70x1,40 m Total height2,25 mPowdered foodsTea, herbs & coffeeStarchBiotechnologyAgrochemicalsSpicesFluid bed dryers continuousCatalysts & fillersFeed additivesCosmeticsAnimal feedSolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicVibraIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffe ...