be used for sale

Becker BZ-2 Atomic - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of construction 2020 In the system, a trimming is first carried out at the front of the cardboard in order to to cut off possible damage to the van. After trimming, a Edge trimming on both sides of at least 30 mm each. Furthermore, if necessary, a corner is cut off from the cardboard. This is depending on the type of Fefco different. Finally, the cardboard is creased at the folding points and removed from the machine. The waste that is generated is transported by means of a waste belt underneath outside the machine. At the machine outlet there is a Conveyor belt, which disposes of the waste into a container. If the edge trim is too long, it must be cut inside the system so that it can be easily removed from the of the plant. The blanks and the ...

: ja miter: 1500 mm : 230 mm weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St. : 70/100 kg : ca. 820 x 740x 560 mm weight: ca.110 kg drawer measurements: 450 x 600 mm Colour: 7035/5012 RAL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU201U005 MakeBecomix TypeM1 RW 1000S No.011-6-1185 Year of construction2007 Mounted on legscheck Pressure Working pressure2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume1442 Ltr. Motor23 KW Specified Features - Processing vessel MaterialStainless steel 1.4404, Stainless steel 1.4541 (321), Stainless steel 1.4581 (348) Closed stirring vesselcheck Capacity1442 Ltr. Vessel sizesdia. 1250x1200 mm Dished bottomcheck Dished top sidecheck Manholedia. 500 mm Top connectionsdia. 80 mm Outletdia. 35 mm (2x) Max. temperature20/134 °C With gate type stirrercheck With paddle stirrercheck Motor11 kW 380-420/660-725 Volt Speed mixing shaftStirrer: 47 rpm: Homogeniser: 2945 rpm With homogenisercheck Motor23 kW 400 Volt Information LocationBarneveld With switchcheck With switchgear(as is) Floorspace2x1,4 m Total height2,9 m Weight15 ...

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 135 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm control: ModEva 12S oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11.0 kW weight: 8800 kg range L-W-H: 4250 x 2150 x 2800 mm current new price approx. 80.000 euros special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ALo1SpWfnTk --------------------------------------------------------- SPEED BEND electro-hydraulic press brake with : increased installation height increased cylinder stroke increased throat depth --------------------------------------------------------- Equipment: - CNC electro-hydraulic press brake - CYBELEC ModEva 12S CNC control unit High-resolution screen  ...

1.0 PCS screw compressor system consisting of the The following components: 1.0 pcs Screw Compressor, Manufacturer: Almig, Type: Belt Drive 15 , Year of manufacture: 2013, Operating pressure: 10 bar, power 15 KW 1.0 pcs. Compressed air dryer Manufacturer: Prematic 1.0 pcs pressure vessel 1.0 Sr. Oil Separator

Key data: 400 mm

Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg

Key data: 340 mm, 1170 mm

CNC turning/milling center Gildemeister CTX Beta 1250 4A with Sinumerik 840D Shopturn Year of Make: 2012 Program running hours: approx. 20,000h INTERLOCKING OPTION UNLOCKED Technical data: Main spindle speed: Drive power: 32 KW ISM 102 Speed of sub-spindle: Drive power: ISM 76 Y-axis carriage 1 Driven tools 1x12 on slide 1+2 Bar Feeder Package Workpiece pick-up gripper can be used on main and counter spindle Coolant system Chip conveyor Short Bar Loader IRCO MUK

Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8,690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 8,850,Design: rectangular,Stand shape: feet height adjustable,Number of feet: 4,Total height: 3,850,Total width: 1,500,Total length: 2,600,Type plate: No,Equipment: Level indicator (without guarantee), Disc,Outlet: DN65 DIN 11851,Remarks: 1 manhole approx. 325 x 420 mm in the front floor Container were professionally cleaned and overhauled by the manufacturer in 2024 Brand new residual drain valves (reduce the size screwed on the Outlet on DN 50 DIN 11851 (with disc valve)) and manhole seals were installed

Extendable spiral mixer PIETRO BERTO, type: Pegaso 340L - Machine suitable for up to 340 kg dough or approx. 200 kg flour - Including 3 tank cars - Including lifting tipper - EL. Connection: 3x 400 V, 50 Hz, 9.3 kW, 19 A - Net weight: 1,185 kg - Machine technically tested and ready for immediate use Visits and test runs are possible by arrangement.

Equipment: Overpressure,Manufacturer: Bertsch,Condition: used,Volume: 67,000,Max. overpressure: 1.0,Max. permissible overpressure Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,000,Cylindrical height: 8,870,Total height: 11,100,Wall thickness underbody: 9,Wall thickness cylinder: 5,Wall thickness upper floor: 6,Technical documents: drawing, acceptance certificate,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet : 100,Remarks: Total height according to drawing (slight deviations possible) Manhole cylinder NW 600,last

Manufacturer: Möschle Behälterbau,Condition: used,Volume: 35,910,Design: upright,Stand shape: feet,Diameter outside: 3,700,Cylindrical height: 3,000,Total height: 4,500,Technical documents: Drawing,Manhole / dome: in the cylinder (approx. 340 x 440 mm), in the topsoil (DN 400),Type plate: Yes,Equipment: Level indicator (without guarantee), Crane eyelets,Outlet: available,Outlet: 50,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No, Power Interferer: No,Ground Bearing: No,Power Interferer: No

Manufacturer: Möschle Behälterbau,Condition: used,Volume: 42,300,Shelves: Klöpperboden,Design: standing,Standing shape: feet,Number of feet: 5,Diameter outside: 2,600,Cylindrical height: 7,250,Total height: 8,750,Wall thickness underbody: 5,Wall thickness upper floor: 3.5,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: crane eyelets,Outlet: available,Outlet: 65,Note: Pressure marks on the cylinder,Last purpose: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Floor bearings: No,Current interferers: No,Floor bearings: No,Current interferers: No

Equipment: Agitator, Overpressure,Manufacturer: Bertsch,Condition: used,Volume: 67,000,Max. overpressure: 1.0,Max. permissible Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,000,Cylindrical height: 8,870,Total height: 11,500,Wall thickness underbody: 9,Wall thickness cylinder: 5,Wall thickness upper floor: 6,Technical documents: drawing, acceptance certificate,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet : 100,Note: slight adhesions,Remarks: Manhole cylinder NW 600 Total height may vary slightly (dimensions

Equipment: Agitator, Overpressure, Vacuum,Manufacturer: Bertsch,Condition: used,Volume: 67,200,Vacuum: 0.25,Max. overpressure: 1.0,Max. permissible Operating temperature : 100,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,000,Cylindrical height: 8,830,Total height: 11,620,Wall thickness underbody: 12,Wall thickness cylinder: 6,Wall thickness upper floor: 8,Technical documents: Drawing, various underlays,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: spray head, crane eyelets,Outlet: flange DN100,Remarks: Cylinder manhole diameter: 600 mm

Equipment: Agitator,Manufacturer: Gebr. Hagemann Beckum,Condition: used,Volume: 30,000,Max. permissible Operating temperature : 100,Lower shelf: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2.488,Cylindrical height: 5.350,Total height: 7.100,Wall thickness underbody: 5,Wall thickness cylinder: 6,Wall thickness upper floor: 5,Technical documents: Drawing,Manhole / dome: in cylinder, hand hole,Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN65,Note: slight adhesions,Last purpose: Chemical,Material in contact with the product: V2A 1.4301 (AISI304), Agitator:

Equipment: Overpressure, Vacuum,Manufacturer: Bertsch,Condition: used,Volume: 43.350,Vacuum: 0.25,Max. overpressure: 1.0,Max. permissible overpressure Operating temperature : 100,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2,400,Cylindrical height: 9,060,Total height: 11,730,Wall thickness underbody: 6,Wall thickness cylinder: 5,Wall thickness upper floor: 6,Technical documents: Drawing, various underlays,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN100,Note: slight adhesions,Remarks: Cylinder manhole diameter:

Equipment: Insulation, Agitator, Overpressure,Manufacturer: Bertsch,Condition: used,Volume: 118,000,Max. overpressure: 1.0,Max. permissible Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 4,Insulation: available,Insulating sheath: riveted,Insulation thickness: 90,Diameter inside: 4,000,Cylindrical height: 8,400,Total height: 13,100,Wall thickness underbody: 12,Wall thickness cylinder: 5,Wall thickness upper floor: 6,Technical documents: Drawing, acceptance certificate,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet : 100,Note: light

Manufacturer: Jorns Behälterbau,Condition: used,Volume: 150,000,Lower bottom: flat bottom with slope,Top floor: conical bottom,Design: standing,Standing shape: flat bottom with slope,Diameter outside: 4,000,Total height: 11,600,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Outlet: present,Remarks: Slight dent in the cylinder,Last purpose: Food,Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No, Bottom Bearings: No,Power Interferers: No

General SKU366W1248 LocationBarneveld CEcheck MakePfaudler-Werke TypeBE 4000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Motor11 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity4000 l. (5369 l.) Vessel sizesø 2000 x 2100 mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck with valve With jacketcheck Max. temperature—25 / 200 °C With propellor stirrercheck 4 blade cryo lock Motor11 kW, 380 V, 1455 rpm (Ex) Speed mixing shaft125 rpm Glass Reactors MaterialGlass - Enamel Information No.59897 Year of construction1995 Mounted on legscheck Floorspace2,2 x 2,2 m Total height1,2 m Weight6400 kg ATEX compatiblecheck Technical specs Extra informationVolume 504 l, allowable temperature -25°C/+ ...

General SKU397X1138 MakeBegerow LocationBarneveld CEcheck TypeK800021 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface0.07 m2 Cake30 Ltr. Specified Features - Candle filter Candle filtercheck Number of candles1 Cake capacity30 l. Liquid outletDN50 Max. temperature0 / 140 °C Vessel sizesø 324 x 440 mm MaterialStainless steel 1.4301 (304) Information No.9092248 Year of construction2003 Mounted on framecheck Mounted on legscheck Floorspace0,70 x 0,80 m Total height1,50 m Weight100 kgCandle filtersBegerowFilters > Candle filtersBrand > Begerow What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more m ...

General SKU397X1076 MakeDe Dietrich LocationBarneveld CEcheck TypeBE 6300 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor11 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6300 Ltr. (8204 Ltr.) Vessel sizesø 2000 x 3050 mm Dished bottomcheck Dished top sidecheck Manholecheck (DN500) Top connectionscheck (DN150) Outletcheck (DN150) With jacketcheck (712 Ltr.) Max. temperature– 25 / 170 °C With propellor stirrercheck Motorcheck 11 kW 400-690 V 1460 rpm (Ex) Speed mixing shaft300-1500-1800 rpm Glass Reactors MaterialGlass - Enamel (3009U) Information No.70021 Year of construction2009 Floorspace2,6 x 2,6 m Total height4,5 m Weight9300 kgGlass-lined ReactorsundefinedReactors > Glass-lined ReactorsBrand > undefined What you can ...

General SKU366W1259 MakePfaudler-Werke LocationBarneveld TypeBE 4000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Motor15 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel Glass Reactors Reactorcheck Capacity5450 l., (4000 l.) Vessel sizesdia. 2100x1600mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck with valve With jacketcheck Max. temperature-25°C/+200°C With propellor stirrercheck 4-blade cryo lock agitator Motor15 kW, 380 volt, 1450 rpm (EX) Speed mixing shaft25-125rpm Information No.49364 Year of construction1989 Floorspace2,1x2,1 m Total height1,6 m Weight5750 kg ATEX compatiblecheck Extra Specificationsmechanical seal on shaft, 4 blade cryo lock agitator, beavertail baffle, botto ...

General SKU366W1266 MakePfaudler-werke LocationBarneveld TypeBE 4000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume4000 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity5450 l., (4000 l.) Vessel sizesdia. 1900x2700 mm Dished bottomcheck Dished top sidecheck Manholecheck DN500 Top connectionscheck Outletcheck with valve With jacketcheck Max. temperature-25°C/+200°C With propellor stirrercheck 4-blade cryo lock agitator Motor15 kW, 380 volt, 1455 rpm, (Ex) Glass Reactors MaterialGlass - Enamel Information No.49365 Year of construction1989 Floorspace2,1x2,1 m Total height1,6 m Weight5750 kg Technical specs Extra informationVolume 514 l. allowable temperature -25°C/+200°CGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werk ...

functionality: Heiz-/Kühlbar, Isolation, Overpressure,Manufacturer: GROSS Behälter- und Anlagenbau,condition: gebraucht,volume: 37.800,max. excess pressure: 2,0,max. allowable working temperature: 20,lower bottom: Konusboden,construction: hanging,stand type: Ring,Heizung/Kühl (Filterleiste): vorhanden,Volume double jacket: 260,0,max. allowable working overpressure (dj) : 1.0,insulation: vorhanden,total height: 7.500,total width: 2.900,manhole: im Oberboden, nameplate: Yes,remarks: Cooling area: 17 m² Cargo dimensions: 7.5 x 3.0 x 3.0 m ,latest application: Beer,floor bearing: No,stream interrupter:

Manufacturer: GROSS Behälter- und Anlagenbau,condition: used,volume: 70.800,bottom: Klöpperboden,construction: liegend,stand type: Sättel,total height: 3.000,total width: 3.000,total length: 10.500,nameplate: Yes,outlet: available,remarks: manhole approx. 350 x 450 mm in the front floor a container (9540-1) with a small bump under the bearing shell, a container (9540-2) without nameplate up to 4 identical additional tanks can be made available on request. The following saddle feet could be purchased separately for the container:

For sale is a Fanuc control panel Type AO5B-2301-C375 Fully functional Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

The machine is in good technical condition, testing is possible after prior agreement. We have a video of the machine available.

Woodzilla BBT 400 Drum Chipper Year of manufacture: 2023 Engine: Deutz 75 hp diesel Max. trunk diameter: 32 cm Height of inlet opening: 320 x 500 mm 360° machine slewing ring Length of feed table: 1300 mm Crane type: Z-Kraan BenTele -Crane reach: 5500 mm -Telescopic: 1100 mm Radio remote control Chassis: Tandem axle Speed up to 80 km/h Weight: 3500 kg

Behr ST 150 Vertical Shaping Machine -Masch.-Nr: 096, -large stroke: 150 / 175 mm -Tilt adjustment of the ram in both directions: 5 / 8 degrees -Height table / UK ram guide: 260 mm -Rotary table diameter: 340 mm -Longitudinal displacement of the table: 320 mm -3 lifting speeds: 17 / 54 / 108 H/min. -Gr. groove width: 16 / 26 mm -External dimensions approx.: 960 x 1530 x 2030 mm with - Feeds in X and Y (back and forth) -Speed adjustable - Adjustment of rotary table manually

General SKU376X935 MakeBecomix TypeDH-500 LocationBarneveld CEcheck Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drivecheck (freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) Information No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specificationsin-line colloid-millInline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working conditio ...

General SKU227X153 MakePfaudler-Werke TypeBE-8000 No.39592 Year of construction1994 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor13.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity9.367 l., (8.000l.) Vessel sizesDia. 2200x2100 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN140 With jacketcheck volume 800 l. Max. temperature-35°C/+200°C With paddle stirrercheck twin paddle stirrer Motor13,5 kW, 500 volt, 1460rpm (EX) Speed mixing shaft70 rpm Glass Reactors MaterialGlass - Enamel (WWG-9115) Information Floorspace2,40x2,40 m Total height4,80 m Weight9.500 kg ATEX compatiblecheckGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke Wha ...

General SKU227X152 MakePfaudler-Werke LocationBarneveld TypeBE-8000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor14.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity9.367 l., (8.000 l.) Vessel sizesDia. 2200x2100 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN140 With jacketcheck volume 800 l. Max. temperature-35°C/+200°C With paddle stirrercheck twin paddle stirrer Motor10/14,5 kW, 500 volt, 725/1455rpm (EX) Speed mixing shaft70 rpm Glass Reactors MaterialGlass - Enamel (WWG-9115) Information No.58225 Year of construction1994 Floorspace2,40x2,40 m Total height4,80 m Weight9500 kg ATEX compatiblecheckGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-we ...

General SKU366W1228 MakeThaletec TypeBE800 LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume800 Ltr. Motor4 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity910 l., (800l.) Vessel sizesdia. 1200x1200mm Dished bottomcheck Dished top sidecheck Manholecheck 320x420 mm Top connectionscheck OutletDN80 With jacketcheck (volume 200l) Max. temperature-25°C/+200°C With propellor stirrercheck2-blade cryo lock agitator Motor4 kW, 380 volt, 1430 rpm, (Ex) Speed mixing shaft23-116 rpm Glass Reactors MaterialGlass - Enamel Information No.629145 Year of construction2009 Floorspace1,4x1,4 m Total height1,2 m Extra Specificationsstraight side, mechanical seal on shaft, 2 blade cryo lock agitator, beavertail baffle, driven by 4KW/3~/ ...

General SKU350W925 LocationBarneveld Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor19 KW Rotor130 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 130 x 50 mm Inlet80 mm Outlet25 mm With mechanical sealcheck Motor16,5/19 kW, 400 volt, 1460/2930 rpm MaterialStainless steel Information MakeBecomix Year of constructionUnknown Mounted on framecheck Floorspace0,50 x 0,90 m Total height0,80 m Weight300 kg Extra Specifications- With input hose Inline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: -- Machine ...

General SKU250U362 MakeBepex TypeL200/50p No.10427 Year of construction1987 Mounted on framecheck Main Features Motor3 KW Inlet diameter310 mm Width50 mm Specified Features - Roll compactor MaterialStainless steel 1.4301 (304) Roll compactorcheck Roll width50 Roll diameter200 Rolls can be heated/cooledcheck Motor3,0kW,220/380 Volt, 1420 rpm With variable speed drivecheck Roll speed18-90 Rolls can be adjustedcheck With dosing/compacting screwscheck Stöber, type: R65-3115-300-4, Dia: 50mm, pitch: 40mm With motor0,75kW, 220/380Volt, 2780/3335 rpm With variable speed drivecheckStöber, type: R25-2038-K2-075-2 Speed3,1-15,5 With hoppercheck Hopper sizesDia: 310x280mm InletDia: 310mm Information LocationBarneveld With switchcheck With switchgearcheck Floorspace1,6x0,9m Total height1,3m Weight750 kgRoll compactorsBepexCompactors > Roll compactorsBrand > Bepex ...

saw blade diameter: 450 mm cutting diameter: 150 mm turning speeds: 6 / 12 / 24 / 48 U/min capacity 90 degrees: flat: 240 x 70 mm capacity 60 degrees: flat: 170 x 70 mm capacity 30 degrees: flat: 120 x 70 mm capacity 90 degrees: round: 150 mm capacity 60 degrees: round: 145 mm capacity 30 degrees: round: 120 mm capacity 90 degrees: square: 140 x 140 mm capacity 60 degrees: square: 125 x 125 mm : 100 x 100 mm total power requirement: 3,6 kW weight of the machine ca.: 1150 kg dimensions: 1450 x 1610 x 1900 mm Semi-automatic mitre saw Equipment: - miter 30° / 60° / 90° - digital display - roller conveyor - Hydraulic clamping - Hydraulic saw blade feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A homemade tractor for logging, a motor from a Belaruss tractor, a bridge from the Urals. HIAB 100 lift, controlled from the cab. Everything works, starts, goes. We sell inexpensively, offer a price.

Pressure plate bending hatchet PB-S; suitable for Heidelberg Speedmaster 52-105; Floor-standing device. Plate bender axe PB-S; used for Heidelberg Speedmaster 52-105; standing device.

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 9,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 2,000,Cylindrical height: 2,440,Total height: 3,700,Wall thickness underbody: 3,Wall thickness cylinder: 2,Wall thickness upper floor: 2.5,Technical documents: Drawing,Manhole / dome: in the cylinder,Type plate: No,Outlet: DN100 DIN 11851 ,Remarks: 1 manhole approx. 320 x 420 mm in the cylinder Container was professionally repaired by the manufacturer in 2024 cleaned and overhauled brand-new residual drain valve (reduced) outlet to DN 50 DIN 11851 (with

This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine.