137,632 used machines on RESALE, but how to find them? Machine Search
This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.
General SKU224S098 MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 No.43164 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel General Mounted on mild steel framecheck Floorspace4,7x1,6 M Total height3,2 M Weight1800 KgFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us ...
sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Truma Bend V85X 2 meters wide, 2.90 high Year of manufacture 2005 25,000 hours
Sprinkler pasteurizer,, Usable length: approx. 13,500 mm,, Usable width: approx. 2,000 mm,, with heat exchanger,, with fan in the outlet,, power: approx. 3,500 glasses / hour, detección automática de velocidad de transmisión: approx. 3,500 glasses / hour
Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type Peflex ESF 3/1 A21 015 beige M1 FG -Product No.: 15-01737 item 513334 -Width: 50mm -Length: 20000mm -Thickness: 1mm -Number: 6x conveyor belt available -Price per piece -Transport dimension: Ø 170 x 50 mm -Weight: 0.9 kg/pc.
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type Peflex ESF 3/1 A21 015 beige M2 FG -Item: 513334 -Width: 50mm -Length: 50000 mm -Thickness: 1mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 240 x 50 mm -Weight: 1.9 kg/pc.
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 2/1 A2/A2-NA-TT beige -Item: 900361 -Width: 50 mm -Length: 25,000 mm -Number: 2x conveyor belt available -Price per piece -Transport dimension: Ø 235 x 50 mm -Weight: 1.1 kg/pc.
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 2/1 A2/A2-NA-TT beige -Width: 60 mm -Length: approx. 50,000 mm -Thickness: 1 mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 305 x 60 mm -Weight: 2.9 kg/pc.
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 2/1 A2/A2-NA-TT beige -Width: 50 mm -Length: approx. 23,000 mm -Thickness: 1 mm -Number: 2x conveyor belt available -Price per piece -Transport dimension: Ø 233 x 50 mm -Weight: 1.1 kg/pc.
Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type EM 8/2 0 045 transp -Product No.: 05-19775 Item No.: 512861N -Width: 100 mm -Length: 3900 mm -Thickness: 2 mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 155 x 100 mm -Weight: 0.9 kg/pc.
Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Manufacturer: Betschke Wegerhoff, lower tool: for press brake 4 pieces -Total length: 3320 mm / 3 x 835 mm 1 x 815 mm -Prisms: 12 mm x 37° / 8 mm x 35° -Dimensions: see drawing in the photos -Transport dimensions: 835/290/H65 mm -Weight: 77 kg
Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tyrolit FSG513P concrete and asphalt cutting device, - Year of manufacture 2014, - Drive: petrol engine (Honda, 1-cylinder), - incl. asphalt cutting disc FSA 450x3.6x25.4 Like new (only 40 m cut), power, - Power output: approx. 8.0–8.2 kW (≈ 10.9–11 HP), - RPM of saw blade: approx. 2600 U/min, Cutting data, - Max. cutting depth: 170 mm, - Max. Sägeblattdurchmesser: 450 mm, - Capture drilling: 25,4 mm, Tank & supply, - Fuel: Gasoline (unleaded), - Tank content: 6.1 Liter, - Water tank (cooling): 25 liters, Dimensions & Weight, - Dimensions (L × W × H): 1136 × 578 × 1016 mm, - Operating weight: approx. 145 kg, - Weight (unladen): approx. 113 kg, Noise & Vibration, - Sound power: approx. 106 dB(A), - Vibration: < 2.5 m/s, OPTIONAL:, 1x like-new Tyrolit FSC diamond saw blade 450x3.6x25.4 - concrete saw blade for €300, excluding VAT.
bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Year of construction: 1990 - Frame height: 3200 mm - For pallets: 800 x 1200 mm and 1000 x 1200 mm - Depalletising head: With clamping slats - Large bottle table: 1350 x 1900 mm - Bottle collation on single-lane conveyor L: 3000 mm
- Ideal assessment of the filterability and the quality of the filtrate - Longer total service life of the membrane filter cartridges through pre-filtration and targeted determination of the regeneration intervals - Reduction of downtime during filling due to perfect pre-filtration - Enables optimum choice of cartridge filter systems due to pilot tests - Polluting load analysis of service media (rinse water, steam condensate) - Easy handling and cleaning of the device - Variable filtration pressure - High flexibility due to a separate container for liquid to be filtered - Display of all measured data from archive - Ethernet interface for data download SPECIFICATIONS: Max. volume: 1.43 gal (5.4 l) Operating pressure: 0 – 43.5 psi (0 – 300 kPa, 0 – 3 bar) Membrane diameter: 1.85 in (47 mm) Membrane, pore size: 0.45 µm, 0.65 µm Max. temperature of medium: 176 °F (80 °C) Max. ambie ...
General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH TypeWS-R-V-T-2.80-0.50-0.30 No.380 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Surface0.75 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryerContinuous operation, pressure/suction mode Surface0,75 m² Bed sizes300 x 2500 mm Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)(Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) General Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m CEcheck Extra inf ...
Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve, Additional title: Refrigerated stainless steel tanks for outdoor installation, Capacity: 74480 l, Operating pressure: 0,9 bar, Width: 12,55 m, Height: 3,27 m, Material: Stainless steel, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement
Used Brewery for beer processing machine 5HLTechnical Specifications & Performance DataThis second hand 5 HL brewery brewhouse on skid is a compact, industrial-grade system engineered for small to medium-scale beverage production. Manufactured by BEOINOX, it integrates key process vessels and utilities for efficient wort production and fermentation management. The system is suitable for craft beer brewing and can be integrated with downstream packaging or a used bottling line.Batch capacity: 5 HL per brewBrewhouse vessels: Mash Tun 500 L, Lauter Tun 1000 L, Whirlpool 800 LUtility tanks: HLT 800 L, CLT 800 L, UnderbackFermentation: 2 × 1350 L fermentation vessels (FVs)CIP: Mobile CIP unit with 2 × 150 L tanksHeat exchanger: Two-stage plate heat exchanger (PHE)Pumps & pipeline: Process pumps and sanitary piping includedAeration: Aeration set includedControl: Integrated control systemMode ...
Secure available Doka H20 top N beams 2.65 m for professional formwork and concrete construction projects 🚀 These proven Doka formwork beams offer high load capacity, versatile applications, and maximum compatibility with common slab formwork and wall formwork systems. Ideal for construction companies and formwork professionals looking for reliable used formwork components with immediate availability 🔥 The Doka H20 top N beams are trusted on construction sites worldwide and form the basis of numerous formwork solutions in building construction, civil engineering, and infrastructure projects. Thanks to their robust design, they provide a cost-effective solution for companies looking to expand existing formwork inventories or source additional beams for ongoing projects ⚡ 🔹 Doka H20 top N beams 2.65 m 🔹 Proven formwork beams ...
Sliding table 1150 x 350 mm, solid double-sided tilting unit bearing, 190 mm tool clearance in the table with under-table dust extraction, large split integral safety milling fence with fine adjustment and central rack and pinion adjustment (tool clearance up to 250 mm), 4 speeds with speed indicator, clockwise and counterclockwise rotation of the milling spindle, spindle swivel 45° to the rear, large cast iron machine table, hold-down clamp with angle stop Space required (L x W x H) mm 2700 x 1600 Table size mm 1000 x 850 Table height mm 850 Slide size mm 1150 x 350 Slide travel mm Up to 1135 Spindle swivel ° Up to 45 Spindle speed (4) rpm 1400/3500/6000/8000 Spindle stroke mm 175 Spindle working length mm 125 Spindle diameter mm 30 Tool diameter Max. mm 250 Tool diameter countersunk mm 190 Dust extraction port mm 2 x 120 mm Power input k ...
Description Item #9292 – (3) BELT COATING MACHINES Manufactured by DTG year 2015 Variable Speed 48inch wide belts
Description Item # 9299 – BELT COATING MACHINE Manufactured by DHIMAN Model DBC-1500 1500mm working width Up to 250Kgs capacity per hour Complete with blower Belt Speed by inverter, Blower Speed by inverter Previously being used for coating nuts & raisons in chocolate ALLEN BRADLEY PLC Controls Main Body of unit in stainless steel
Description Item # 9357 - BEAN TO BAR CHOCOLATE LINE Manufactured by SELMI Year 2021 Including : ROASTER 106, 6Kgs capacity, 3Phase, 380Volts, 50hz WINNOWER, Single Phase, 220Volts, 50Hz GRINDER PLUS, 15Kgs Vat capacity MICRON BALL MILL, 3Phase, 400Volts, 50Hz VIBRO SIEVE, Single Phase, 220Volts, 50Hz CONCHA 60, Single Phase, 220Volts, 50Hz
pressure: 20.0 t chamfer lenght: 850 mm distance between columns: 850 mm back stop - adjustable: 375 + 400 mm stroke of upper beam: 196 mm dayligth: 470 mm ajustment speed: 200 mm/sec table height: ca. 900 mm total power requirement: 5.0 kW weight of the machine ca.: 2500 kg New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - https://www.youtube.com/watch?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of di ...
: 1050 mm : 5.5 mm : 5.0 mm roll diameter: 130 / 195 mm : 2.2 kW : 1050 kg : 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 800 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm : 0 - 180 ° : 2 (60.,3mm) mm : stufenlos 0,5 - 2,0 : 1,5 kW : 700 kg - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 13,0 mm pre-bending: 10,0 mm diameter of upper rolls: 300 mm side roll diameter: 210 mm diameter of lower rolls: 270 mm total power requirement: 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2600 mm plate thickness: 10,0 mm pre-bending: 8,0 mm diameter of upper rolls: 230 mm side roll diameter: 190 mm diameter of lower rolls: 210 mm total power requirement: 7,5 kW weight of the machine ca.: 5.560 kg. range L-W-H: 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solutio ...
pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1200 mm column arm: 200 mm ram stroke speed: 60.0 mm/sec return speed: 80. mm/sec work speed: 60.0 mm/sec work stroke: 100 mm table height: 760 mm table width: 150 mm oil volume: 130 ltr. voltage: 400 Volt Control: ESA E21 total power requirement: 4.0 kW weight: 3030 kg range L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double ...
pressure: 60.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm back stop - adjustable: max. 800 mm oil volume: 150 ltr. voltage: 400 V engine output: 7.5 kW Weight: 4320 kg range L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours -------------------------------------------------- CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphi ...
I - beam section - flat steel: 80 x 16 (d 1200) mm I-beam section - upend: 50 x 15 (d 1000) mm L-beam: 50 x 5 (d 1200) mm round material: 40.0 (d 800) mm bar material dia. max.: 70 x 2.0 (d 1600 ) mm square material: 80x30x3 (d 4000) mm channels - flange: UNP 80 (d 800 ) mm bending speed: 4.4 m/min roll diam. toproll: 157 mm bore: 50.0 mm oil volume: 18.0 Liter total power requirement: 1.1 kW weight: 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manual ...
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 12.0 mm/min return speed: 190 mm/sec work stroke: 275 mm dayligth: 550 mm oil volume: 300 ltr. table height: 900 mm table width: 90.0 mm voltage: 400 Volt total power requirement: 15.0 kW weight: 9800 kg range L-W-H: 4150 x 2150 x 2800 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool R ...
sheet width: 3100 mm plate thickness: 10 mm pre-bending: 8 mm upper roll diameter: 270 mm lower roll diameter: 250 mm side roll diameter: 210 mm total power requirement: 11 kW weight of the machine ca.: 7750 kg Overall size: 5600x1450x1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 40 mm pre-bending: 30 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 22 kW machine weight ab.: 17200 kg Overall size: 5060 x 2200 x 2180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 132 mm tool adaptor: 40 mm speed: 5 m/min total power requirement: 2,2+0,55 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1800x700x1600 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5+0,55 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 160 mm lower roll diameter: 140 mm side roll diameter: 120 mm total power requirement: 2,2 kW Overall size: 4140x1040x1140 mm weight of the machine ca.: 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4100 mm plate thickness: 35 mm pre-bending: 28 mm upper roll diameter: 540 mm lower roll diameter: 541 mm side roll diameter: 440 mm total power requirement: 37 kW weight of the machine ca.: 48.100 kg Machine dimensions approx.: 7670x3000x2930 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 16 mm pre-bending: 13 mm upper roll diameter: 330 mm lower roll diameter: 300 mm side roll diameter: 240 mm Control: total power requirement: 11 kW Overall size: 5600x1650x1900 mm weight of the machine ca.: 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 5 mm pre-bending: 5 mm upper roll diameter: 170 mm min. bending diameter: Ø 255 mm bending speed: 4,5 m/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3800x1100x1130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
