be used for sale

Single-station machine for articles up to 10 ltr. Extruder 60/20D. Single head, Parison pre-squeeze/cutting device. Waste punch. Immediate available

drawer rail, telescopic rail, drawer pull-out, drawer runners, Telescopic rails, pull-out rails, side rails, front pull-out, stainless steel bar handle -Bar handle:Stainless steel Ø10 mm -Length 630 mm / hole spacing 620 mm -Quantity: 1x handle available -Dimension: 630/40/H10 mm -Weight: 0.4 kg

moulder for bread rolls

Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press -Manufacturer: Benzing, pneumatic cutting device -Stroke: adjustable, max. 70 mm -Individual components: see photos -Dimensions: 150/130/H450 mm -Weight: 9.3 kg

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

USB charging socket, USB charging socket -Manufacturer: Berker, USB charging socket 230 V, 2-way, 3A Ovp -Type: 926102505 ZR3722 -Number: 25 x socket available -Price per piece -Packaging dimensions: 80/80/H60 mm -Weight: 0.2 kg/piece

Qty. 1 Second-hand filling monoblock Mfc.: STORK Bepak B.V. Type: VS 60/110/12 LW – 0.25, 0.5, 0.7 L Built: 1992 Carousel type 60 Pourers Equipped with a capping machine - 12 heads Installed power: 13.5 kW Nominal capacity: up to 20,000 bottles/h Working capacity: 12,000 bottles/h for a 0.5 l bottle Two sets of heads for 28x18 and 28x38 caps Two slides Multi-row plate conveyors feeding into and out of the monoblock. Technical assessment: complete device, technically efficient

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 280 -Outer pulley diameter: 295 mm -Hole: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

Qty. 1 Second-hand carton forming machine Mfc.: STORK Bepak B.V. Type: S.A.-25 – 0.25, 0.5, 07 L Built: 1998 Possibility to form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to C, a hot melt adhesive applicator (Nordson USA) (granules or flakes) applies heated hot melt adhesive under high pressure in the form of strips to the vertical folds of the bottom of the carton. Capacity: 25 cartons/min Installed power: 8 kW Technical assessment: complete device, technically efficient. Price: EUR 49,500.00 As is where is!

Ventilation valve, relief valve -Manufacturer: BEV, ventilation valve for water -Type: M16072 PN16 DN 050 -Bolt circle: Ø 125 x 17 mm -Dimensions: 165/162/H295mm -Weight: 13 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, vacuum pump type VT 3.10 -Drive: 0.37 kW / 1420 rpm -Volume flow rate: 10 m³/h -Suction pressure: -850 mbar -Dimensions: 420/190/H285 mm -Weight: 15 kg

Vacuum pump, rotary vane pump -Manufacturer: Becker, vacuum pump type VT 3.40 -Drive: Dietz 1.25 kW / 1430 rpm -Volume flow rate: 40 m³/h -Suction pressure: -900 mbar -Dimensions: 420/190/H285 mm -Weight: 38 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Benzlers, gearbox type BS40 -Translation: 15 : 1 -Shaft: Ø 20 x 50 mm / see photos -Dimensions: 270/145/H140mm -Weight: 4.3 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Benzlers, gearbox type 50 -Translation: 21 : 1 -Shaft: Ø 19 x 35 mm / hollow shaft Ø 25 x 100 mm -Quantity: 1 piece available -Dimensions: 180/98/H155 mm -Weight: 4.5 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Benzlers, gearbox type BS40 -Translation: 15 : 1 -Shaft: Ø 20 x 50 mm / Ø 14 x 25 mm -Dimensions: 147/148/H140mm -Weight: 3.5 kg

Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety controller, safety switch, safety sensor, overload trip power sensor -Safety sensor: Overload trip power sensor -Type: BEV-1013 -Quantity: 1x available -Dimensions: 180/145/H95mm -Weight:1.6 kg

Door opening button, push button, door opener, automatic door sensor -Manufacturer: eao, Opening and presence detectors for railway interior doors, original packaging -Type: RS-1 Hitachi -Technology: Active Infrared Technical data: see photo -Transport dimensions: 200/140/H40 mm -Weight: 0.1 kg

fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Fan blower cross-flow fan -Engine: EMI 105B-50110/3 -Voltage: 230V / 110/300 W / 1100 rpm -Fan wheel: both sides Ø 150 x 240 mm -Dimensions: 1040/220/H200 mm -Weight: 10 kg

Key data: 75 , 10 , 691

Parameters: -Max. pressure 10 bar - capacity 691.2 m3/h - power 75 kW - Built-in dehumidifier - PREVENTIVE MAINTNANCE support in 2019.

Bendi forklift in lovely condition. Manufacturer rebuild in 2015. New charger 2015. 5.5m lift. Available immediately, viewing possible in Milton Keynes, UK.

Belshaw Mark VI Automatic donut fryer Serial: 22682 2018, 4 wide automatic fryer for donuts, 1000+ donuts per hour, adjustable speed, timer and temp controls, with infeed conveyor, 1Ph

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tires 2 pieces -Tire size: 250-15 RIM 7.00F-15 -Bolt circle: Ø 225 x 28 mm -Recess: Ø 175 mm -Price/Delivery: complete -Dimensions each: Ø 700 x 215 mm -Weight: 90 kg/piece

switch built-in boxes, contact protection boxes -Manufacturer: Berker, built-in boxes, contact protection boxes 27 pieces -Diameter: 49 mm -Installation depth: 38 mm -Price/Delivery: complete -Dimensions each: Ø 50 x 40 mm -Weight: 0.1 kg/piece

three-jaw chuck, three-jaw lathe chuck -Manufacturer: Bergmans, three-jaw chuck type 4110 chuck size Ø 255 mm -Passage: Ø 65 mm -Bolt circle: Ø 140 mm / M12 -Dimensions: Ø 255 x 140 mm -Weight: 31 kg

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Manufacturer: Bernstein, Inductive proximity switch -Type: M30AS/010-LSD -Number: 7x sensor available -Price: per piece -Dimensions: 115/55/H36 mm -Weight: 0.3 kg/piece

4. Qty. 1 Second-hand Monoblok Mfc.: Stork Bepak BV Type: VS 60/110/12LV Built: 1992 Carousel monoblock 60 pourers 12 closing heads Fill inspector Missing cap Capacity: 20 000 bottles/h Sizes: 250, 500, 700, 750 ml

Key data: 150 t, 2550 mm

Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg

Manufacturer: BECK Machine type: Shrink Tunnel

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Motor Schlüter 1.5 kW -Container capacity: liters -Dimensions total: 850/620/H670 mm -Weight: 124 kg

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm -Roll: Ø 52 x 355 mm -Dimensions: 500/420/H570 mm -Weight: 14 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tire with rim -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimensions: Ø 430 x 160 mm -Weight: 30 kg

Used monobloc made by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type VS 60/110/12 LV. New 1992. Specification: - 60 pourers, - 12 closing heads, - Filler and cap inspector, - Capacity 20,000 bottles/hour, - Contents: 250 ml., 500 ml., 700 ml., 750 ml.

Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.

Device for inline measurement of Brix(sugar)o.Diet, CO² and conductivity

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll height: 445 to 565 mm -Roll: Ø 55 x 270 mm -Dimensions: 370/315/H445 mm -Weight: 22 kg

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

approx. 554 pieces of shelves for shelving / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 49cm = Field depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: now Location. Frankenberg / Saxony

General - Bertolaso Filling and Sealing Combine, YOC 2006 - Running direction left/right - Capacity range up to 8,000 bph 63-digit clamp overhead rinser - Ozone sterilization medium - Fully automatic sterilization before the start of filling - Centrally adjustable inlet stars, easy inlet screw replacement 40-Digit Vacuum Filler - with new gearbox - Centrally adjustable inlet screws - Easy inlet screw replacement - Fully automatic damping - Central height adjustment 6-digit natural cork seamer - with separate cork supply 6-head screw capper for BVS 30/60 and MCA 28 - Central cap supply - with central control station - Automatic faulty bottle ejection and collection station - With fully automatic star adjustment and easy screw change The filling and capping combine is immediately available and can be visited at any time after consultation. Used machines ...

Tires, solid rubber tires, forklift tires, complete wheel -Manufacturer: Bergougnan, solid rubber tires with rim 2 pieces -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Shipping/Price: complete -Dimensions: Ø 400 x 160 mm -Weight: 24 kg/piece

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll: Ø 65 x 240 mm -Dimensions: 325/65/H520 mm -Weight: 8.7 kg

diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used KRONES carbonated drink bottling line – capacity: approx. 7,000 bottles/h • Bottle formats: 330, 500, 700, 750, 900, 1000 ml • The line worked with cider, sparkling wine and champagne. • Possibility of pouring beer in a returnable/non-returnable bottle • Possibility to check and run the line before purchase. Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1989 (Kontipack E) 2. Krones returnable bottle washer from 1988 Type 150/10-110 3. Krones VKV40/SV10/KK filler from 1988 - 40 fillers with ALCOA capping machine 4. Krones capping machine 5. Bottle capping machine ADELSKI PP2010, 2007 (Adelski) 6. Manual cork presser 7. Installation for Velcorin 8. Wire insertion machine (Nortan, Minerva 80-120, 1995) 9. Machine for applying gold (Nortan, Prisma 80:s, 1994) 10. Labeling machine + banderole (Krones Taxomatic, KES -  ...

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc