be used for sale

Engine management light is on because of intermediate switch on dashboard. Loading platform: 490cm. Original mileage! Auction-ID: A1-47422-138

Equipped with: CW10 connection, working width 2,000 mm, suitable for excavators of approx. 6–14 tons, equipped with excavator quick-change mount, reinforced leveling/scraping bar, Auction-ID: A1-47394-293

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-50796-370

Mercedes vito; electric windows; Auction-ID: A1-47422-164

Workshop bench vise with swivel base and 360° rotatable head. Made of cast iron to ensure strength, durability and rust resistance. Auction-ID: A7-50796-142

Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50796-36

Consisting of infeed roller conveyor length approximately 20 meters with 3 bends, pneumatic turn and push plate, Genius groupage clamp with stacking function with maximum lift capacity 200 kg, pallet warehouse lift and feed rollers, vacuum lifting for intermediate carton supply, foil wrapper Robopac type Rotoplat 2000/A bwj 2004 with rotating roller conveyor and pressure plate, run-out roller conveyor, complete safety fence, control panels and electrical cabinet, pallet with wrapping film, EVERYTHING TO BE DISASSEMBLED BY BUYER, supply power cable including to building mounting, everything at the discretion of the person responsible on site Auction-ID: A1-50974-4

Workshop bench vise with swivel base and 360° rotatable head. Made of cast iron to ensure strength, durability and rust resistance. Auction-ID: A7-50796-42

Kärcher BD 55/60 W – walk-behind scrubber dryer (Used machine / battery defective) • Manufacturer: Kärcher • Type: BD 55/60 W • Device type: Walk-behind scrubber dryer • Year of construction: 2006 • Device number: 010059 • Operating hours: approx. 282 h 23 min • Working width: approx. 550 mm • Design: Scrubber drier with travel drive • Power supply: 24 V DC • Power consumption: 1,300 W • Charger: Integrated, 230 V / 50 Hz / 720 W • Total weight according to the nameplate: 310 kg • Degree of protection: IPX3 • Scrubbing system: disc brush system • Dirty water intake via rear suction bar • Fresh and dirty water tank • Control panel with LCD display • Forward/reverse travel via controls on the handlebar • Two batteries installed Condition: • Used condition with clear signs of wear due to age and use • Operating hour cou ...

Batch of Carpinus betulus Hornbeams – 156 Pieces – Various Sizes Specifications: Species: Carpinus betulus English name: Hornbeam Total Quantity: 156 Pieces Size 10-12: 8 pieces Size 12-14: 27 pieces Size 14-16: 66 pieces Size 16-18: 45 pieces Size 18-20: 8 pieces Size 20-25: 2 pieces Features: 8 pieces Carpinus betulus size 10-12 27 pieces Carpinus betulus size 12-14 66 pieces Carpinus betulus size 14-16 45 pieces Carpinus betulus size 16-18 8 pieces Carpinus betulus size 18-20 2 pieces Carpinus betulus size 20-25 Particularities: Lot consisting of a total of 156 Carpinus betulus Lot composed of different sizes Suitable for landscaping, landscaping and planting projects , among other things Auction-ID: A1-47394-113

Trumpf TruBend Center 5030Year of manuf. : 2021 ____________Description:TruBend Center 5030:- Robust machine frame: - Angular direct drive:- Crowning system:- Machine control with touchscreen operation:- TecZone Fold programming – floating licence:- 2-axis part manipulator with suction modules:- 5-axis backgauge:- Optical angle assistant:- ToolMaster:- Hold-down tools:- OBW90 and UBW90 bending toolsTechnical specificationsMinimum bending depth (standard tool):145 mmMinimum bending depth (with additional hold-down tool):40 mmMaximum bending length:3,123 mmMinimum bending length:80 mmHold-down force:101 tMaximum box height:220 mmMinimum material thickness:0.4 mmMaximum steel material thickness:3 mmMaximum stainless steel material thickness:2.2 mmMaximum aluminium material thickness:4 mmRapid traverse Y-axis (press beam):250 mm/s5-axis backgauge:1,700 mm/sToolMaster Bend:2,400 mm/sD ...

Cutting height: 175 mm Motor output: 15 kW cutting width: 620 mm Cutting length: 5200 mm Dimensions (L/W/H): 7000 x 1470 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 175 - 210 mm Motor output: 15 kW cutting width: 620 mm Cutting length: 5200 mm Dimensions (L/W/H): 7000 x 1470 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1600 mm Number of sanding units: 2 st. Workpiece thickness max.: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6.5 mm pre-bending: 4.5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20.0 mm voltage: 400 V total power requirement: 1.1 + 2.2 kW weight of the machine ca.: 2370 kg range L-W-H: 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!) Features: - Electro-hydraulic 4-roll plate bending machine Equipped with a driven top roll and bottom roll Sturdy welded construction - Application range: Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls (SAE 1050 /  ...

Equipped with stones for the wall, wall dimensions: 498x15x250cm, plant pot dimensions: 252x70x60cm. Auction-ID: A1-50621-44

Sandpit Tom with lid/bench, 120 x 120 x 30 cm green impregnated (without bottom). The lid forms two handy seats when folded! This way there is always a dry seat and the sandbox is neatly covered. Impregnated and planed boards 20 mm thick with chamfered edges. Outer size with unfolded benches approx. 136 x 120 cm. Auction-ID: A1-45120-2273

Spruce beams with a size of 500 x 27 x 5.2 cm each. Auction-ID: A1-45120-2263

BECKMAN COULTER 70.1 Ti titanium angular rotor; Fixed angle rotor; Max: 70,000 rpm, 450,000 x g; Capacity: 12 x 13.5 mL; Rated Capacity: 162 mL; K-factor: 36; Angle: 24º; Maximum tube length: 76 mm; Maximum tube diameter: 16 mm; For use with H, R, S centrifuges; Internal reference: FA-1951 Auction-ID: A1-50994-1040

Schechtl HBM 310 Manual Swivel Bending Machine with Roller Shears • Manufacturer: Schechtl • Model: HBM 310 • Year of construction: 2017 • Serial number: HB27520 • Manual folding machine • Working length: 3,140 mm • Working capacity steel (400 N/mm²): 1.00 mm • Working capacity aluminium (250 N/mm²): 1.50 mm • Working capacity stainless steel / stainless steel (600 N/mm²): 0.80 mm • Working capacity copper (300 N/mm²): 1.25 mm • Working capacity zinc (150 N/mm²): 2.50 mm • Upper beam stroke: 100 mm • Sloping upper beam • Foot-operated clamping of the upper beam • Includes hand roller scissors • Roller shears with guide rail • Cutting capacity roller shears: up to 0.8 mm • Manual operation • Weight: approx. 1,370 kg • Instruction manual available • Used machine • Made in Germany Auction-ID: A1-50373-2271

BETTER CD-310 Portable Pen Type Digital Conductivity Meter; ; New equipment in its original packaging; ; Model Number: CD-310; Measuring range 0~999 μs/cm; Resolution: 1 μs/cm; Accuracy: ± 2% F.S; ATC: 0~50°C; Working temperature: 0 to 50°C, RH<95%; Power: 4X1.5V (AG-13 type coin cell battery); Calibration: 1 point; Dimension: 1806533mm; Weight: 117g; ; Internal reference: FA-2440 Auction-ID: A1-50994-1055

Softwood beams with a size of 30×100×540 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2208

Softwood beams with a size of 35×35×2350 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2213

Sandpit Tom with lid/bench, 120 x 120 x 30 cm green impregnated (without bottom). The lid forms two handy seats when folded! This way there is always a dry seat and the sandbox is neatly covered. Impregnated and planed boards 20 mm thick with chamfered edges. Outer size with unfolded benches approx. 136 x 120 cm. Auction-ID: A1-45120-2271

Bending Tensile Testing Machine Testing of large specimens for bending tensile strength Load ranges: 40kN, 100kN, 200kN Specimen width maximum 1.32 m Specimen length depends on the space required and the specimen weight The buyer must dismantle and load the machine/system. Auction-ID: A1-51071-16

Spruce beams with a size of 400 x 7.8 x 5.2 cm each. Auction-ID: A1-45120-2262

BETTER CD-310 Portable Pen Type Digital Conductivity Meter; ; New equipment in its original packaging; ; Model Number: CD-310; Measuring range 0~999 μs/cm; Resolution: 1 μs/cm; Accuracy: ± 2% F.S; ATC: 0~50°C; Working temperature: 0 to 50°C, RH<95%; Power: 4X1.5V (AG-13 type coin cell battery); Calibration: 1 point; Dimension: 1806533mm; Weight: 117g; ; Internal reference: FA-2440 Auction-ID: A1-50994-1056

Consisting of infeed roller conveyor length approximately 20 meters with 3 bends, pneumatic turn and push plate, Genius groupage clamp with stacking function with maximum lift capacity 200 kg, pallet warehouse lift and feed rollers, vacuum lifting for intermediate carton supply, foil wrapper Robopac type Rotoplat 2000/A bwj 2004 with rotating roller conveyor and pressure plate, run-out roller conveyor, complete safety fence, control panels and electrical cabinet, pallet with wrapping film, EVERYTHING TO BE DISASSEMBLED BY BUYER, supply power cable including to building mounting, everything at the discretion of the person responsible on site Auction-ID: A7-51083-4

Softwood beams with a size of 45x95x1910 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2216

Note: There are several identical containers from the inventory. Other identical containers as well as containers in other colours will be offered in separate auctions. 40ft high-cube storage container with multiple doors Manufacturer: Dong Fang International Container Co., Ltd. (DFIC) Year of construction: 2025 ISO Type: 45G3 High-cube design with increased interior height Multiple side access doors along the entire length of the container CSC certified Gross weight: 24,000 kg Net weight: 4,260 kg Payload: 19,740 kg Volume: approx. 74.3 m³ External dimensions: approx. 12,192 x 2,438 x 2,896 mm (L x W x H) Interior clean and almost unused Doors and latches functional Slight traces of use due to storage and transport present Overall condition: as good as new / one-trip version Scope of delivery: 1 container from the existing stock. /b> Auction-I ...

Electromechanical recirculating bending testing machine Machine for determining flexural fatigue strength max. bending moment of 27 Nm with a specimen diameter of 6.74 mm, frequency: from 0 to 120 Hz 200 Hz possible, trapezoidal torque curve between the bearings The blue boxes in the background are not one of them. The control cabinet pictured belongs to this auction and can control up to two of these recirculating bending machines. However, there is only one PUNZ up for auction Auction-ID: A1-51071-18

Belt sorter Manufacturer: Transmatic Overall dimensions (W x D x H): 2650 x 850 x 1700 mm Weight: 175 kg Working height: 1100 mm Technical documentation: elements Auction-ID: A1-51057-2

Sandpit Tom with lid/bench, 120 x 120 x 30 cm green impregnated (without bottom). The lid forms two handy seats when folded! This way there is always a dry seat and the sandbox is neatly covered. Impregnated and planed boards 20 mm thick with chamfered edges. Outer size with unfolded benches approx. 136 x 120 cm. Auction-ID: A1-45120-2272

Softwood beams with a size of 30×100×600 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2212

Softwood beams with a size of 30×30×500 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2219

Softwood (spruce) beams with a size of 38×120×2254 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2215

Softwood beams with a size of 30×100×600 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2209

Hydropanel fiber cement board with beveled edges with a size of 2600x600x12 mm each. Reaction to fire class: A2-s1, d0. Package dimensions: 260x60x60 cm. Auction-ID: A1-45120-2199

Equipped with: Circulation pump, 4 seats, 19 jets, color casing Coastal Grey, color cockpit Alpine White, Black Cover. Auction-ID: A1-50621-19

JENWAY SP-400-BIO Series 72 Single Beam UV/Visible Spectrophotometer; ; New equipment in its original packaging; ; Brand: COLE PARMER; Spectral range: UV/visible; Model 7200 BIO; Range (nm): 198 - 800 nm; Light Source: Xenon Lamp; Accuracy: ± 2 nm; Repeatability: ± 2 nm; LED strip; Spectral band: 3 nm; Power supply: 12V DC, 3.8A; Dimensions (W x D x H): 212 x 422 x 120 mm; Weight: 2.8kg; ; Internal reference: FA-2541; Auction-ID: A1-50994-1109

Sandpit Tom with lid/bench, 120 x 120 x 30 cm green impregnated (without bottom). The lid forms two handy seats when folded! This way there is always a dry seat and the sandbox is neatly covered. Impregnated and planed boards 20 mm thick with chamfered edges. Outer size with unfolded benches approx. 136 x 120 cm. Auction-ID: A1-45120-2274

Year of Make: 2015 Supply voltage: 100 to 240 V AC Frequency: 47 to 63 Hz Power consumption: 500 W Made in Germany CE marking available. Auction-ID: A1-51071-15

Softwood beams with a size of 45x95x1910 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2218

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude can only be adjusted via travel Auction-ID: A1-51071-13

Softwood beams with a size of 30×100×600 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2211

Spruce beams with a size of 500 x 27 x 5.2 cm each. Auction-ID: A1-45120-2264

Laboratory Water Bath - 8 Liters BENCHMARK B2000-8 MYBATH; ; New equipment in its original packaging; ; Model: MyBath 8L; Manufacturer Number: B200-08-E; Power: 600W; Temperature range: Ambient +5°C to +100°C; Temperature accuracy: +/- 0.5°C; Temperature increase: 0.1°C; Temperature uniformity: +/- 0.2°C; Bath volume / capacity: 8 liters; Bath dimensions: 24.1 x 32.5 x 14.9cm; External dimensions: 28.4 x 44.5 x 31.5 cm; Weight: 7.7kg; ; Internal reference: FA-2386 Auction-ID: A1-50994-1033

BERTHOLD TECHNOLOGIES MITHRAS LB 940 Multimode Microplate Reader; ; Plate reader for luminescence and fluorescence; Number: 38099-33; ; Untested equipment; Without a computer; Without software; ; Internal reference: FA-1494; Auction-ID: A1-50994-1023

- Capacities: 12000 PET bottles/hour from 33cl to 2L Ø45 to 104mm Height 140 to 350mm - Technical data: see photos - Including elevator belt with filling funnel for screw caps - Equipped with Simatic touch panel control - Without bottle supply belt - Including output belt approximately 2m - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-1

Softwood beams with a size of 30×100×540 mm, planed all around (S4S) and executed with rounded edges (R3) for a neat finish and pleasant processing. The beams are pressure impregnated (KDI) and colored brown, which ensures increased durability and suitability for outdoor applications. Auction-ID: A1-45120-2207