be used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 € : 100.36 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 € : 247.68 € : 40 to : 285 mm : 200x24 mm : 660x1250 mm : 250 mm : 80 mm : 10 mm/s : 10 mm/s : 4 kW : 930 mm : 1250 mm : 650 mm : 1250 mm : 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 160000 € : 3024 € : 300 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 3550 mm : 4000 mm : 2600 mm : 15000 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.800 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 € : 236.16 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 030138 : prompt, Zwischenverkauf v : Deutschland : 3444.77 € : 1 : 13 mm : MK 2 : 220 mm : 40 - 4000 U/min : M 10 (steigungsabhängig) : 520 mm : 400 mm : 850 mm : 62 kg : 60 mm : 85 - 370 mm : 420 mm : 300 x 250 mm : 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500) The dat ...

Features Volume 10600 L Material No. V2A Working pressure 2 bar Operating temperature range 2 C Total height 3900 mm Diameter 2000 mm Description Topsoil: Clapper bottom/ curved back Threaded connection DN32 Ladder hooks Cylinder: Level indicator with DN20 hose Manhole oval 440 x 340 Sample tap DN15 CIP line with airflow valve with pressure relief valve and pressure gauge with Disc Valve DN20 with T-Piece with Disc Valve DN32 Underbody: Clapper bottom/ curved back Central outlet with residual drain pipe pulled forward with disc valve DN65 flush with the tank wall 4 profile feet with calottes - height adjustable

Features Operating pressure 3 bar Operating temperature 20 °C Material No. V2A Total height 3900 mm Diameter 2000 mm Volume 8000 L Description Topsoil: Clapper bottom/domed back Central connection DN25 threaded weld-on socket with CIP performance Cylinder: Level indicator with plastic hose DN25 Manhole oval 450 x 350 Sample tap DN15 Threaded Weld-on Socket with CIP Pipe with Fermentation Spun Valve with Pressure Gauge with Cross Piece with Disc Valve DN25 Underbody: Clapper bottom/ curved back Central outlet DN65 with residual drain pipe pulled forward with disc valve DN65 flush with the tank wall 4 trumpet feet with domes - height adjustable

Features Volume 10160 L Test pressure 4.3 bar min./max. operating pressure (hp) 3 bar min./max. operating temperature (TS) +50/-10 °C Total height 4100 mm Diameter 2050 mm Vertical design Surface inside 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom/ curved back 2 crane eyes Cylinder: Level indicator with DN20 hose with bar and scale with DN20 disc valve Ladder hooks Manhole oval 440 x 340 Sample tap DN15 Airlock sheet pile DN40 with pressure relief valve with airlock connection Underbody: Clapper bottom/ curved back forward-drawn residual drain pipe with DN65 with disc valve 4 profile feet with carrots - height adjustable

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 134000 € : 2532.6 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solut ...

: gebraucht : WA0178 : 279 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 25400 € : 485.14 € : 40 to : 1250 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 970 € : 1 : 1.2 mm : 100 mm : 140 nm : 7 Stk. : 62 mm : 560 mm : 220 mm : 500 mm : 50 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090209 : prompt, Zwischenverkauf v : Italien : 7780 € : 150.15 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57920 € : 1094.69 € : 60 to : 2050 mm : 3 (Y1, Y2, X) : 265 mm : 1700 mm : 450 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 110 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 7.5 kW : 3200 mm : 1550 mm : 2850 mm : 5600 kg : 650 mm 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double l ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 231900 € : 400 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 630 mm : hydraulisch : 150 mm/s : 9 mm/s : 150 mm/s : 750 mm : 160 l : 7500 mm : 2110 mm : 3810 mm : 34600 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DX ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 159300 € : 3010.77 € : 320 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 5300 mm : 1910 mm : 3230 mm : 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 100920 € : 1907.39 € : 220 to : 4050 mm : Y1 / Y2 / X Achse : 265 mm : 3600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 5250 mm : 1770 mm : 3000 mm : 14750 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 € : 18 mm : MK 2 : 240 mm : 30 - 3000 U/min : M12 : 355 mm : 705 mm : 1065 mm : 170 kg : 100 mm : 155 - 415 mm : 155 - 550 mm : 340 x 280 mm : 82 mm Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice &, keyless chuck) The data for this ad wa ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 28450 € : 543.4 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone leng ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 € : 470.4 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

Automatic Conveyor Belt for Vacuum Filling Machines (Wolfs)

: gebraucht : WA0102 : 292 € : 1 : 835 mm : 80 mm : 25 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0147 : 890 € : 1 : 3050 mm : 105 mm : 85 mm (screwed 5x from above) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 57300 € : 804.11 € : 1 : 42100 € : 60 to : 2100 mm : X und Y Achse : 160 mm : 1700 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 7.5 kW : 2450 mm : 1600 mm : 2235 mm : 4340 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms laser safety device Fiessler motorized crowning table intermediate pieces for the upper tool clamping die holder for 60 mm tools die with 4 V openings upper tool, slightly cranked, sectioned foot pedal user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1350 mm z-travel: (Vert.) 1600 mm Control: Heidenhain iTNC 530 table surface area: 4200 x 1150 mm table load: 13 t tool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/min transmission ratio: 2 spindle motor: 28/38 kW feed range: 5000 mm/min rapid traverse: (X/Y) 12 m/min rapid traverse: (Z) 10 m/min weight of the machine ca.: 37 t dimensions of the machine ca.: 12,9 x 6,53 x 3,79 m In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. CNC-control HEIDENHAIN iTNC 530 Electronic handwheel 50-position tool changer Controlled universal milling head, indexable 2.5 / 2.5 deg. Coolant device Cooling through the spindle 2 chip convey ...

x-travel: 2500 mm y-travel: 1300 mm z-travel: 900 mm Control: Heidenhain iTNC 530 table surface area: 2500 x 800 mm table load: 5,0 t tool taper: SK 50 DIN69871 spindle turning speed range: 36 - 4000 U/min feed range: 2 - 12000 mm/min main drive: 25 kW total power requirement: 50 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) m The main engine was overhauled in September 2022 for € 6,000. The machine was partially overhauled in 2007 Scope of overhaul: Feed motors were overhauled New Heidenhain iTNC 530 control system with new main spindle drive (Siemens) Retention of the control cabinet and feed drives Geometric overhaul of the machine Overhaul of the tool changer Defective guideway covers were repaired or replaced The milling head was completely overhauled approx. 3 years ago. Equipment: CNC control Heidenhain iTNC 530 Horizontal/vertical swivell ...

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm diameter of upper rolls: 540 mm diameter of lower rolls: 500 mm side roll diameter: 440 mm engine output: 55 kW total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Bending speeds, slow and fast Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the control panel Central rolls (top and bottom rolls) driven by hydraulic motors and planetary gear reducers Electro – hydraulic calibration OPTIONAL FEATURES AND ACCESSORIES: Center support: 21.468,75 € Side supports  ...

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...

sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 205 mm side roll diameter: ~ 195 mm Control: konv. oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 3200 kg range L-W-H: 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch u ...

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 2550 mm throat: 310 mm stroke: 200 mm ajustment speed: 80.0 mm/sec working feed: 10.0 mm/sec return speed: 58.0 mm/sec dayligth: 385 mm table width: 240 mm work height max.: 885 / 1050 mm oil volume: 180 ltr. total power requirement: 15.0 kW weight of the machine ca.: 9850 kg. range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display ...

pressure: 80.0 t chamfer lenght: 2550 mm distance between columns: 2130 mm column arm: 420 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec stroke: 200 mm dayligth: 470 mm table width: 60.0 mm table height: 910 mm Number of working hours: ca. 37.102 h total power requirement: 9.0 KW weight of the machine ca.: 5750 kg range L-W-H: 3100 x 2180 x 2540 mm good / well-maintained condition () - Inspected condition - Machine video - https://www.youtube.com/watch?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools  ...

pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm ajustment speed: 90.0 mm/sec working feed: 10.0 mm/sec return speed: 75.0 mm/sec stroke: 140 mm dayligth: 375 mm column arm: 250 mm table width: 90.0 mm work height max.: ca. 950 mm Number of working hours: 14.100 h total power requirement: 13.5 kW weight: 8500 kg range L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library - CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled g ...

pressure: 80.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 250 mm table width: 85.0 / 135 mm stroke: ca. 390 mm dayligth: ca. 585 mm ajustment speed: 180 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec work height max.: 1050 mm Number of working hours: 32.495 h oil volume: 200 l operating pressure: 320 bar total power requirement: 11.6 KW weight of the machine ca.: 7300 kg range L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake MADE IN GERMANY () - CYBELEC CNC control  ...

tube diameter: 33,7 x 3,4 GAS mm tube diameter: 35,0 x 2,5 STAHL mm tube diameter: 35,0 x 1,5 EDELST mm bending radius min.: R10 - R 190 mm bending angle max.: 0 - 180 ° tool taper: 6-kant 40 mm voltage: 230 V total power requirement: 0,9 kW weight of the machine ca.: 23,0 kg Description: - MediBender 070 digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 4100 mm distance between columns: 3710 mm stroke - stepless adjustable: 250 mm column arm: 330 mm dayligth: 500 mm table height: 940 mm table width: 250 mm working feed: 7.0 mm/sec return speed: 90.0 mm/sec Control: konv. operating pressure: max. 305 bar voltage: 380 V total power requirement: 22.5 kW weight: 25200 kg range L-W-H: 4320 x 2100 x 3370 mm well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) with analog position display - 1x split set of 85° deer foot ...

tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 mm total power requirement: 5,5 kW weight of the machine ca.: 1300 t dimensions of the machine ca.: 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 42.0 x 3.0 STAHL mm tube diameter: 30.0 x 2.0 EDELST mm bending angle max.: 180 ° bending radius max.: 100 mm bending speed: 2.0 U/min. Control: NC voltage: 400 V total power requirement: 0.55 kW weight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 € : 1056.51 € : 3100 mm : 9 mm : 8 mm : 7 mm : 7 mm : 5 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1470 mm : 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of  ...

: gebraucht : WA0043 : 129 € : 1 : 835 mm Phase: 1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 € : 1366.47 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 € : 781.19 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2792.28 € : 10 mm : B 16 : 220 mm : 250 - 3000 U/min : 0,45 kW : 320 mm : 520 mm : 820 mm : 44 kg : 60 mm : 140 - 315 mm : 300 x 250 mm : 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: gebraucht : WA0007 : 217 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 9691 : prompt, Zwischenverkauf v : Türkei : 24600 € : 1 : 85 mm : 247 mm : 3 : 7.5 kW : 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm : 1200 mm : 1410 mm : 2350 kg demo machine / mint condition net price 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES! BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE W ...