be used for sale

Flat conveyor belt on aluminium substructure - Virginio Nastri Flat conveyor belt on aluminium substructure Length of the carrying strap 395 cm, width of the carrying strap 80 cm With the regulation of the amount Conveyor belt mobile, on wheels

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Key data: 1300 mm, 2 , 150 mm

Wide belt grinding machine 1300 mm 2 Volume

Key data: 3 mm

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Stepless speed adjustment via handwheel Clockwise and counterclockwise rotation Hydraulic infeed via foot switch Weight: approx. 550 kg Other tools on request

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

plate thickness: 4 mm plate length: 200 mm total power requirement: 3 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 1,0 x 0,8 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

Swivel Conveyor Belt Conveyor Belt Flat Belt Used the belt is mounted on a slewing ring Ø approx. 1.3 m and can also be moved lengthwise on this Manufacturer: MÖLLERS Year: 1974 Conveying length: approx. 11 m Strip width: approx. 650 mm Width of the belt construction approx. 850 mm Drive with drum motor 1.5 kW Bandgeschw. 1.34 m/s 220/380 V Total dimensions: approx. 11 x 1.3 x 1.6 m

Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 625 mm -Photographs: 12/9 mm see photos -Quantity: 162 pieces available -Price: per piece -Dimensions: Ø 60 x 660 mm -Weight: 2.2 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 90 mm -Transport width: 630 mm -Photographs: 15/12 mm see photos -Quantity: 147 pieces available -Price: per piece -Dimensions: Ø 90 x 655 mm -Weight: 6.9 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 500 mm -Photographs: 15/12 mm see photos -Quantity: 48 pieces available -Price: per piece -Dimensions: Ø 60 x 530 mm -Weight: 2.2 kg/pc.

Edge and profile sandingr manufactured in 2017. This HEESEMANN UKP 20 features a total conveyor length of 5015 mm and a feed speed range of 5-25 m/min. It includes two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking to get high-quality sanding capabilities, consider the HEESEMANN UKP 20 machine we have for sale. Contact us for further details.

Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine.

Sheeter with centering belts Nanmak DS 760 Year of Make: 2022 Condition: Test Machine Belt speed infeed/outlet separately adjustable Roller speed adjustable Adjustable roller gap Belt width 76 cm Working length 172 cm Length per band 81 cm Band height from the ground: 108 cm Centering belt also available as 3 rows Flour shakers External dimensions (LxWxH): 172x110x150 cm

I got it from a collectors engineer which he did't have used it either. It is latest development from Myford, and founding a clean example like this is very difficult, Including high quality Jaws and Tool post as below: 3 jaw chuck, Cam Lock 4 jaw chuck, Cam Lock Dickson Quick Change Tool post, Face plate , Myford Cabinet with doors and key

Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Inv. Num. : 9163 Type: MAH 40/3 CNC Producer: AMOB Created: 2022 Parameters: Diameter of the cylinders: 148 mm Length: 1200 mm Width: 770 mm Height: 1450 mm Weight: 540 kg Hydraulically controlled upper roller feed Can be used vertically and horizontally 3 mechanically driven rollers Side rollers (manually adjustable) Adjustable control pedal 3 standard rollers

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

Transnorm belt conveyor GF 26000-1000-900 RA2510 Technical data: Conveyor length (NL): 26000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 26000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor dischar ...

Microwave tunnel conveyor dryer for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water cooling circuit included. Ventilation system to extract water vapor from the chamber not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electrical • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: PTFE food grade (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 150 ...

This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine.

PART NUMBER 7967 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 170mm 2 generators: 1) Metal corrugated roller for calibration 2) Grooved rubber roller + boot + metal roller – in advance: - Rubber roller, sliding - generator (two generators on one motor) 15kW - Rubber roller, sliding - Rubber Output Roller - blowing the tape – from below: - 2 metal sliding rollers - pulling tape - Rubber rollers, sliding 2pcs - pneumatic oscillation of belts - grinding thickness potentiometer - electric table top lift + manual (for precise adjustment) - air brake - 2 types of feed speed - working pressure 6-8bar - Diameter of the extraction port 2x140mm - overall dimensions l/w/h 1830x1670x1950mm - weight 1160kg ADVANTAGES – Italian production – 2 grinding units – unpainted – used grinder, perfect condition Net price: 77900 PLN Net  ...

Part number 7976 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 160mm 2 generators: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – in advance: - 2 metal rollers, sliding - pressure - Aggregate - 2 metal sliding rollers - Aggregate - 2 metal rollers, sliding - cleaning brush – from below: - 2 rubber rollers, slip - pulling tape - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed - working pressure 8-10bar - Extraction port diameter 2x200mm - total power 30kW - overall dimensions l/w/h 2230x2020x2050mm - weight about 3000kg ADVANTAGES – German production – 2 generators – used grinder, very good condition Net price: 16900 PLN Net price: 4024 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

PART NUMBER 7910 SPECIFICATIONS - max workpiece width 1350mm - max workpiece height 150mm – in advance: - rubber roller, pressure roller And the aggregate (metal cylinder grooved for calibration) II aggregate (two metal rollers, smooth + sequential shoe) - rubber roller, pressure roller - cleaning brush – from below: - Introductory roller, metal - pulling tape - Outlet, slip, metal roller - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed 2-14m/min - main motor 5.5/15kW - brake - grinding height potentiometer - feed motor 0.75kW - working pressure 8bar - Extraction port diameter 200mm, 120mm - dimensions l/w/h 1860x2200x1980mm - weight 1995kg ADVANTAGES – German production – unpainted – DTR documentation – used grinder, very good condition Net price: 38900 PLN Net price: 9262 EUR d ...

Refurbished Filler with Cap 88 in excellent condition 100V

Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.

This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information.

CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used - : Price ex location: 23.500.-€ (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMONSTRATION MACHINE Three-axis milling machine in flatbed gantry design. Working paths X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame wag Bortal: Design as a solid, stress-free, completely welded slahl construction, powder-coated. Heavy table base to accommodate the VAC-CAISSON vacuum table, designed as a cassette, air passage holes in a grid of 10 mm. Feed speed: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, sliding shoes with upstream ball circulation. Transmission : Precision Ball Screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeatability: +/- 0.025 mm Mechanic ...

This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 18,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details.

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm -Inner diameter: 300 mm -Width: 120 mm -Quantity: 2x inner ring available Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

Kannegiesser belt conveyor GF 4200-880-800 RA2512 Make: Kannegiesser as good as new, exhibition machine year of construction 2014 Conveyor length (FL): 4200 mm Belt width (GB): 800 mm Nominal/outer width (NB): 880 mm Conveyor speed: freely adjustable between -0,95 and 0,95 m/s Electrical data: 380V, 0.25kW Without controls/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 4200 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Nord KW: 0,75/S1 Ampere: 0,9 Conveyor speed m / s: -0,95 - 0,95 scope of delivery: without supports and side guides Für eine ind ...

Equipment: heatable/coolable, overpressure,condition: brand new,volume: 1,175,max. permissible Operating temperature : 50,Max. overpressure: 2.50,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Heating/cooling (filter bar): available,Volume double jacket: 7.0,Max. permissible Operating overpressure double jacket / pipe chamber / bar: 3.0,Max. permissible Operating temperature : 50,Temperature control cylinder: Thermoplate,Temperature control underbody: Thermoplate,Diameter inside: 1.000,Cylindrical height: 1.250,Total height: 2.050,Technical documentation: Drawing,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Spray head,

Equipment: Heatable/coolable,Condition: used,Volume: 1.050,Design: upright,Stand shape: feet,Number of feet: 3,Heating/cooling (filter bar): available,Max. permissible Operating overpressure double jacket / tube chamber / bar: 6.0,Temperature control cylinder: Thermoplate,Diameter inside: 1,000,Cylindrical height: 1,238,Total height: 1,810,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: No,Equipment: Level indicator (without guarantee), Crane eyelets,Outlet: DN50 DIN 11851 ,Remarks: Manhole diameter: approx. 420 x 320 mm,Surface outside: marbled,Material in contact with the product: V2A 1.4301

Condition: used,Volume: 900,Design: oval,Stand shape: feet height adjustable,Number of feet: 4,Cylindrical height: 1,290,Total height: 1,950,Type plate: No,Equipment: disc tap, spray head,outlet : 35,Note: slight adhesions,Remarks: Height-adjustable screws of the feet incomplete (for installation this would have to be compensated accordingly on site) there may not be a spray head for every tank,last use: beer tank,material In contact with the product: V4A 1.4401/04 (AISI316),Material feet: stainless steel,Bottom bearing: No,Current interferer: No,Bottom bearing:

Beverage cooler for 10 x 50 L KEG - Hefa - Type 4.2 - Temperature infinitely variable - Dimensions 2.2 m wide, 1.45 m high with unit, 1m deep - Year of construction 2021 - Project: BEVERAGE COOLER -25- MWWOBAU

Belt sander manufactured in 2019. This Lingi Jianzhong BSG2613C features a maximum working width of 1300 mm and a processing thickness range of 5-80 mm. It includes a grinding belt dimension of 1350x2800 mm and operates at a speed of 31 m/s. If you are looking to get high-quality sanding capabilities, consider the Lingi Jianzhong BSG2613C machine we have for sale. Contact us for further details.

CNC Bed Milling Machine KIHEUNG U1050 Control: Heidenhain iTNC 530 Year of Make: 2014 Internal machine no. 61 X-axis: 2,500 mm Y-axis: 1,050 mm Z-axis: 1,600 mm Tool holder: SK50 DIN ISO Tool magazine: 24-fold Facilities - Chip conveyors - Magnetic clamping plate - Handwheel HR410

A motorized sheet metal forming machine is offered, drive: electric, control: foot pedal, control: foot switch. Equipped with an electric foot button. Weight: approx. 150kg, overall dimensions X/Y/Z: approx. 500mm/1000mm/1200mm. Inspection possible by arrangement.

7 pieces telescopic belt conveyor, MAXX REACH, 27m total length - used - : Price per piece ex location: only 18.950.-€ (net), incl. loading! Price when buying 3 pieces: only 16.950.-€ / piece (net) ex location! Price for complete acceptance: only 15.950.-€ / piece (net) ex location! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of Make: 2019 Serial number: e.g. W190103-02-03 According to the manufacturer, up to approx. 27m total length extended Length retracted: 8.80m I.e. the device extends about 18m! Body width: approx. 1.20m Total width approx. 1.53m plus motor on the side approx. 20cm 3-fold telescope Ideal for unloading trailers – the device can then also be located about 5 – 6m away from the unloading gate, i.e. a forklift can still drive in front of it when retracted, etc.! Height: approx. 1.22m Total weight: 6. ...

Belt sander manufactured in 2008. This TECNOLEGNO COMPACT 52 is a 5-aggregate sander designed for sanding edges and profiles. If you are looking to get high-quality sanding capabilities, consider the TECNOLEGNO COMPACT 52 machine we have for sale. Contact us for further details.

Harrison 150mm Metric (L6) Lathe 3-speed 380V motor runs smoothly! Forward and reverse rotation. Geared spindle drive, gears run in oil. Spindle speeds adjustable from 45 to 1000 RPM. Spindle coupling for changing speed while the motor is running. Automatic feed in longitudinal and cross directions. Tapping threads is possible and easy thanks to the Norton gearbox. Removable machine bed for turning larger diameter workpieces. MT3 tailstock taper. Center distance: 600 mm Center height: 170 mm Spindle bore: 37 mm Dimensions: 170 x 70 x 130 cm Made in Great Britain. Includes accessories as shown in the pictures!

This 5-axis SACHMAN TS10 bed type milling machine is manufactured in 2026 and brand new. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details.

Fasti - Round bending machine / type 2040x2mm -GS / Identifier -Roller diameter 105mm -Max. sheet thickness over the entire length 2mm -Footswitch -Safety device Dimensions: LxWxH 3x1x1.3 meters / Weight 1400Kg Hebjvdnahskn Au S Tsl