baumüller nord getriebe used for sale

1 of used hot-melt unit, make Nordson, type 3700-2BB36. Tank capacity 13.6 kg, melt rate 18.1 kg/hour. Suitable for 380-415/220-240V, 50/60Hz. With Pneumatic piston pump 21:1, non-recirculating manifold for 6 hoses witih standard filter, Multiscan controls for 6 hoses and guns. Hoses and guns NOT included. New 1990.

Sample punch for specimen DIN 527-2 mm. suitable for elastomers, paper, cardboard and foil. NEW.

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

Longitudinal slitting machine for paper. NEW. Cutting to length (columns) paper or foil to approx. 70 cm width-Perforieren paper, labels, cards, forms -6 Circular blades (blades), or alternatively 6 perforating knife holder -Maximum paper width 70 cm Shipping is possible with extra charge.

Qty. 1 Second-hand carousel baitec painting line Mfc.: Nordson Type: Sure Coat Built: 2002 Capacity: 150profiles/h Max. profile length: 7.0 m Qty. 10 electrostatic guns Capacity: 5 profiles inside oven

ID3354 Unimog - 4x4 year/Baujahr 1982 Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and mud drilling), with piston pump with approx. 200 litres per minute for core drilling, with centrifugal pump for well drilling (supplied loose), two-stage power rotary head (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, flush drilling max. 600mm in air-lift or suction flush drilling (additional equipment: drilling diameters up to 290mm are possible in rotary drilling), without casing machine Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and flush drilling), with piston pump with approx. 200 l per minute for core drilling, with centrifugal pump for well drilling (loosely enclosed), power rotary head two-stage (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, fl ...

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

50 piece solid Carbide end mills (HPC milling cutter) 10 mm with 6 cutting 45 ° Helix coated cutting length ca. 23 mm (suitable also for harder materials). NEW. List price 60.00 euros.

10 piece blade 80 x 40 x 1 mm (or 70 x 40 x 1) mm for belt cutting machine. NEW. Larger quantities available!

A roll punching press for stamping is available up to A3. The die is pulled under the roll.

Nordson / Puffe Extruder Plant Ex20 -1xPS01-1xPE20-1 for melting hot melt adhesives and thermoplastics, feeding as granules. Melting capacity according to the manufacturer's specifications up to 20 litres/h (EX20) Price: 45.000, -- € plus 19% VAT (Gross price incl. VAT 53.550, -- €) EXW Manufacturer: Nordson / W. Puffe Hotmelt-Technology Model No.: Ex20 -1xPS01-1xPE20-1 Year of manufacture: 05/2006 Serial No. 226260231/001 Power: 15 kW, connection 380V three-phase current Emergency stop, traffic light, CE mark Made in Germany Compact system mounted on a stable rolling frame (H= 198 cm, W= 160 cm, D= 110 cm) consisting of Nordson extruder, gear metering pump, Lenze worm drive, control cabinet with Allen-Bradley control, graphical user interface, storage tank, operating manual. Auxiliary: Labotec Minifeed Suction Conveyor MF60 Serial No. 12-103-00669 (Owner's man ...

Hole punch (punch) Northern precision punching NPR-55 Hole punch (knuckle punch) -Punching of sheet metal and plastics. -Aluminium, bronze, copper, 2 mm steel sheets -Simple solution of punching - punching with punch and die stamp round D = 10 mm can be replaced individually on request

Toothed sticking knife for packing machine. 10 pieces approx. 260 mm long handle recording according to drawing or sample. Please separately request.

Spare blade for Längsschneiddysteme (slitting lines) 10 piece circular knives (upper blade) 100 x 70 x 1, 2 (or similar size) with 10 bit holder shaft. NEW. 10 piece counter knife (bottom) 78 x 55 x 10 (od similar dimensions). NEW. For slides or paper industries. Alternative dimensions on request.

Blades for industry (sewing machine spare parts) Cutting blades Stitch cutter Circular blades, upper knife Sewing machine parts According to drawing or sample. Price on request.

An Eckenabrunder (corner punch) is designed to provide orthogonal edges with a RADIUS. With various stamping and punching tools, materials such as paper, cardboard, aluminum-composite, aluminum can be processed up to 2 mm (E.g. signs) and non-ferrous metals. Corners cut round NPR 45 incl. 1 piece knife R 4 or R 8.

Angle cutting machine. NEW.

Technical data: Web width: 1,300 mm Lamination type: Duplex (two-ply) Adhesive system: 2-component, solventless Mechanical speed: 300 m/min Unwind diameter: 800 mm (shaftless, single-position) Rewind diameter: 800 mm (shaftless, single-position) Core diameter: 3" Web direction control: Integrated web guiding system Corona treatment: 1–2 corona stations Heating: Electric heating with temperature regulation system Coating rollers: Coating head with staggered application rollers for solventless adhesive, configured for accurate laydown control Main Features: - Shaftless single unwind station - Shaftless single rewind station - Duplex configuration for solventless adhesive lamination - Corona treater for surface activation - Electric heating for coating unit - Temperature control system - Web guide for precise alignment - Coating head with multiple rollers for fle ...

Hotmelt lamination line BC 62 Nordson Porous coating 80cm-1675mm full line with inline printing unit 2 unwinders, 1 rewinder 1 inline printing unit Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based

Nordson 3100-2AA32; State as is; only checked for function; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Gear motor, offset gear motor, electric motor, three-phase motor, electric gear motor -Speed: 104 rpm -Power: 4 kW -Motor type: SK 112M/4 -Construction: B3/B5 -Shaft: Ø 30 x 70 mm -Protection class: IP 55 -Dimensions: 550/285/H260 mm -Weight: 49 kg

Gearboxes, stin gearboxes, angular gearboxes, transmission gearboxes, crane gearboxes -Ratio: 16.29: 1 -Hollow shaft: Ø 80 x 310 mm -Hole circle: Ø 300/ M16 -Price: per piece -Number: 2 pieces -Dimensions: 700/540/H405 mm -Weight: 282 kg/piece

1 used Nordson 16 foot hose, Blue Series, 240V/504W. Built 2013. Nordson part number 2747976. 6 pieces available (intermediate sale reserved).

1 used Nordson 24 foot hose, Blue Series, 240V/760W. Built 2013. Nordson part number 274797. 6 pieces available (intermediate sale reserved).

Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags