baumüller nord getriebe used for sale

Vertical CNC Milling Center ANAYAK ANAMATIC 9 Year of construction 7/97 Currently dismantled and prepared for transport. The machine was in production until mid-2022 Immediately available and ready to use Technical Parameters: Work table length 1300 mm Work table width 530 mm Maximum table load (uniform) 500 kg Number of tools in the storage container 30 pieces Minimum vertical spindle speed 70 1/min Maximum vertical spindle speed 5000 1/min Mechanical feed length axis X 1070 mm Mechanical feed length axle Y 535 mm Mechanical feed length axis Z 510 mm Maximum Axis Feed Speed X 250 mm/s Maximum feed speed axis Y 250 mm/s Maximum feed speed axis Z 250 mm/s With Fanuc 160i-L Viewing and transport possible at any time We offer inexpensive financing / installment purchase / trade-in of machines! Maschinenhandel Nord new & used machines for industry, t ...

Key data: 380 mm, 500 mm, 6000 1/min

CNC machine Monforts type RNC 3 The RNC 3 was in operation until September, in good condition, immediately available. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time. Free loading. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844 Technical specifications are non-binding. Errors excepted.

Key data: 380 mm, 500 mm, 6000 1/min

CNC machine Monforts type RNC 3 generally good condition, but currently not ready for use due to a defective electric motor. The machine has always been serviced and was in operation until recently. Sold as a spare parts donor. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time. Free loading. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844

Key data: 600 mm, 1000 mm, 4000 1/min

CNC lathe Monforts Type: RNC 5 High-quality high-performance lathe with a wide range of performance in universal 2- to 3-axis machining, with a turning length of 1,000 mm and a circulation diameter above bed of 600 mm. The RNC series meets all requirements; Various spindle assemblies and drive variants, Y-axis, hard turning package, automatic loading and unloading equipment, tool and workpiece measurement, tailstock and steady rest are all options available. Available with Fanuc or Siemens control. Turning diameter 600 mm Turning length 1000 mm Control MCS 800 (Siemens 840 C) Spindle speed 1 4000 1/min Spindle speed 2 4000 1/min Drive power L / R 18/24 kW Torque at the spindle 630 nM C-axis 0.001° Revolver No. 1 stations / of which driven 12/12 VDI 40 Turret No. 2 stations / of which driven 12/12 VDI 40 Speed range - milling 3000 1/min Drive power - milling spindle 8. ...

Key data: 560 mm, 260 mm, 4000 1/min

MHC - Horizontal Pick-up Machine at call The MHC PickUp is a high-performance lathe with automatic tool handling for series production. It can optionally be equipped with bar feeder and with workpiece loading and unloading. The horizontal design allows turning diameters of up to 520 mm and workpiece lengths of up to 260 mm. Optionally available with Fanuc or Siemens control. The technology platform of the MHC PickUp is the Monforts tool machine DNC. The precise, reliable machining of the of the clamped workpiece by turning, drilling, milling via an overhead tool turret. In addition to bar loading, it is optional to equip with fully automatic workpiece loading and unloading. This is particularly important in the high-volume serial production offers significant time and cost advantages because manual In some cases, work steps are eliminated and throughput times ar ...

CNC turret lathe Okuma LB15 at call The OKUMA LB 15 CNC lathe has been professionally serviced regularly since its purchase and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret holder for 12 tools. The turning spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Technical specifications of the CNC lathe OKUMA LB-15 – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Slain chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Diameter of the spindle bore: fi 75 mm (at a depth of 70 mm, measured from the front of the lathe chuck and without jaws) – Diameter of the spindle bore: fi 28 mm (at a depth of 200 mm, measured from the front of the lathe chuck and without jaw ...

Gebrauchter Kartonverschlie maschine APE bis zu 1200 Kartons Stunde Zuverl ssigkeit und Effizienz Die gebrauchte APE Kartonverschlie maschine steht als Eckpfeiler der Zuverl ssigkeit und Effizienz in der Abf llindustrie F r Hochgeschwindigkeitsoperationen konzipiert repr sentiert sie den H hepunkt technologischer Fortschritte Tats chlich erf llt sie die strengen Anforderungen industrieller Umgebungen mit Finesse und Pr zision Perfekte Versiegelung Mit akribischer Aufmerksamkeit f r Details konstruiert gew hrleistet der Verschlussmechanismus oben verst rkt mit Hei leim und angetrieben von einem Nordson Klebstoff eine perfekte Versiegelung Nahtlos integriert vereinfacht die automatische Eingabe des Kartontrenners den Arbeitsablauf Dies erleichtert einen reibungslosen Ablauf der Kartons und optimiert die Produktivit t in jedem Schritt Automatisierter Betrieb Der automatisierte Verschluss de ...

Plasma Cutting Machine good condition, At call Manufacturer: Maschinenfabrik Bach GmbH, Apolda Machine No.: 15197-11 Year of construction: 03/2011 Control type: myBach Power: 1600 KVA Thermal-Dynamics DMC-3000 Ultra-Cut 300 Max. OCV: 380 VDC Min. Output Current: 10 Amps Maximum Output Current: 300 Amps Output voltage: 60 – 230 VDC Duty cycle: 100% at 300 A, 180 V Duty cycle ambient temperature: 104°F Power factor: 0.70 at 300 A DC output Cooling: Recirculating air (class F) The machine can be viewed at any time Transportation possible If you have any questions, just write or call: 0160 966 798 44 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Key data: 337 KW, 1500 1/min

New engine block Scania DI/DC12 with OE number 2055383 at special net price Net/piece 12.595€ Price is subject to VAT Gross price: 17.381€ MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone:0049(0) 4281-950583

- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition

Rollenbahn Palette inkl Getriebemotor Hersteller : Kettner 2 Stück More then 300 machines new and second hand on our seema .de

Key data: 225 KW, 1500 1/min

Scania engine DC09-63A fuselage engine from Schnell CHP completely overhauled in exchange. Old engine must be break-free and crack-free + repairable. MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven Germany Phone: 0049 4281 950583 infoatmiw-zeven

Output: max. 80 packs/minute, designed for square cups (101 x 101 x 57 mm),, two lanes,, consisting of the following individual machines:, shell destacking, make Carsoe Anytray Twin Denester, year of construction 2013, volume dosing filler, manufactured by Lieder/Robot Food Technologies, series AWF, type 2, year of construction 2015, for free-flowing, non-sticky products that contain little liquid., min. 15 pieces of product must make up the volume to be filled The machine is designed for processing e.g. vegetable mixtures, rice, pasta, caviar, olives, etc., With lifting and tipping device and corresponding housing, without dispenser for liquid or pastes, self-made, Time-controlled pump for dosing oil, brine or pasty products such as dips or dressings, two filling stations,, tray sealing line, make Multivac type T700, year of construction 2012, Sealing of prefabricated trays, bowls and c ...

Mecalux transfer roller conveyor slider 90° 915-1410-870+445 RA1915 Make: Mecalux Running direction: both directions Roller width (RB): 870 to 450 mm Nominal/outer width frame (NB): 960 and 540 mm Total width: 1410 mm Length: 915 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 2x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 725 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) nominal voltage: 400, 24V angle: 90° Conveying length in mm: 915 Nominal / outside width in mm: 540, 960, 1410 Roll width in mm: 870 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24 ...

Packaging system, make Meypack, type VP452, year of construction 2006, Type of packaging: tray, tray/lid, Maximum output: 30 packs/min., Machine data:, Inlet height: 1,150 mm, Outlet height: 650 mm, Dimensions of the possible multipack:, L x W x H: 200-400mm x 120-300mm x 80-350mm, Cutting dimensions: L x W: 360 – 1,400 mm x 300 – 700 mm with Nordson hot melt device, ProBlue P/N213 544C

Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WS Year 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screen The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor belt: Conveyor belt on solid stainless steel base, height adjustable -Speed: 14.5 m/min -Conveyor belt width: 385 mm -Conveyor belt length: 2195 mm -Motor/gearbox: Nord 0.55 kW see photo type plate -Total dimensions: 2215/630/H860 mm -Weight: 69 kg

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180  ...

T.Freemantle Ltd mobile continuous two flap sealer with outfeed belts, model: S05, serial number: 21-1557, year of construction: 04/2022, 240 V, chain conveyor with dividers, distance between dividers: 270 mm, clearance: 180 mm x 115 mm, Nordson glue unit, type: MESA 4, 2 H/G, serial number: JC22D80549, total dimensions: 3150 mm x 1200 mm x 1100 mm. T.Freemantle Ltd transport belt, type: S23, serial number: 22-1611, year of construction: 04/2022, 240 V, plastic belt, belt width: 300 mm, totald dimensions: 1300 mm x 550 mm x 950 mm. Transport belt, s/s frame, plastic belt, belt width: 195 mm, total dimensions: 1500 mm x 450 mm x 800 mm.

Description: Type of edging Thin edge Thick edge Solid wood Gluing System PUR Premilling Unit yes Corner Rounding Unit yes Grooving Unit yes Max feed speed 24 m/min Maximum panel thickness 60 mm Operating Units 9 nr Min. panel height 12 mm Max. panel height 60 mm Min. edge thickness 0.4 mm Max. edge thickness 20 mm Max. forward feed speed 24 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes premelter for PUR glue NORDSON Roller set to press the edge yes with positioning by NC yes No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top a ...

Manufacturer: Norden Model: NM 250 HA Year: 2003 Type: Hot air plastic tube filler / sealer Max capacity : 25 units / min Transport chain : 14 buckets Empty tube feeding : manual Tube printing centering 20 L hopper HA hot air device Ribbed or smooth sealing 1 side coding: 6 characters Verification check: no tube - no filling Available formats. Cutting recovery: CFM R154V hoover ThermoChill I Recirculating Coolers General information Filling volumes: 1ml - 300ml. Diameter: 10 mm - 50 mm

Overview This complete filling line for single-use glass was delivered in 2019. Commissioning was stopped in Q1 2020, and resumed in Q4 2021. The line has been running 2/3 days per week since Q4 2021. The line can do 20 variations of bottles including 300ml, 330ml, 500ml, 568ml & 650ml. Components Depalletiser | Emmeti | MT565 | 2016 Siemens Simatic controls, Harford control panel. Bottle outfeed conveyor, plastic chain-link 1400 mm x 9.6 m with tapered outfeed on stainless steel supports. Krones Glideliner Accumulator with tapered outfeed, 850 mm to 350 mm wide Empty bottle inspector | Krones | Linatronic | 2003 60,000 bottles per hour Throughfeed stainless steel slat chain conveyor Height adjustable legs complete with dust canopy. Left to right orientation Filling block for glass | Krones |  2003 rebuilt 2018, installed 2019 Capacity: 50.000 bottles/h at 0,33 l long-neck glass bottle  ...

Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unit Approx. Onsite Dimension. (l x w x h): 10,700 x 1,250 x ...

Availability: as of now Condition: fully functional Performance/Speed: 40 cartons per minute Format sizes: see picture Gluing device: Nordson 3100-2EAV 2D/R This machine can be used to form boxes of various sizes from cut sheets of cardboard, gluing the edges of the formed box with hot glue sprayed with a gun. The FM80I moulder is equipped with a glue unit to close the bottom of the box.

Mecalux transfer roller conveyor slider 90° 835-735-650 RA1925 Make: Mecalux Running direction: both directions Roller width (RB): 650 mm Nominal/outer width frame (NB): 735 mm Length: 835 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide and transfer belt lifter: Lenze-Motor 3x 400V Motor Roller conveyors: 1x ITOH-Deki 16936/010 24V Height frame: 160 mm Height frame including motor: 360 mm Currently set high: 745 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr scope of delivery: supports, 2x Light barrier, 3x Closure sensor and 1x PROFINET-Feldbus-Splitter Optionally available: Side guides on one-sided or both sides Features: Construction year: 2017 nominal voltage: 24V, 400 condition: very good (used) angle: 90° Conveying length in mm: 835 Nominal / outside width in mm: 735 Roll width in mm: 650 Roll division in mm: 75 Driv ...

Tetra Pak filling line no. 1 Year of construction 2004 consisting of:  - Filler TBA/21 TPA500 SQ, incl. VIDEOJET 1630, year 2019 - Applicator TCAP45 incl. gluing unit NORDSON Problue 4 - Packer TCP70 incl. gluing unit NORDSON Problue 10 - Conveyor belts per line approx. 65m Tetra Pak filling line no. 2 year of construction 2003 consisting of:  - Filler TBA/21 TPA500 SQ, incl. VIDEOJET 1630, year 2016 - Aplicator TCAP45 incl. gluing unit NORDSON Problue 4 - Packer TCP70 incl. gluing unit NORDSON Problue 10 - Conveyor belts per line approx. 65m Price: per filling line (2 lines available) Each line can be sold separately.  Both lines are set up for Tetra Prisma 500ml Option at extra charge: comprehensive spare parts package customized to the machines More then 300 machines new and second hand on our seema .de

x-travel:3200 mm y-travel:2000 mm z-travel:800 mm table-size:3200 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:10 t distance between columns:1840 mm distance spindle nose and table:180~980 mm spindle drive:22/26 kW max. torque on the spindle:560/662 Nm spindle nose:50 BT spindle speed:6000 U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):8927 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:29 t positioning accuracy:0,025 (gem. VDI/DGQ3441) mm repeating accuracy:0,020 (gem. VDI/DGQ3441) mm CNC controller:FANUC 0i MF (mit AICC II, Ethernet DNC, fine mould package, machining condition selecting) gear box:BF Getriebe heat exchanger:für den Schaltschrank chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband CE-design:gegen Mehrpreis möglich (ve ...

x-travel:2300 mm y-travel:2000 mm z-travel:1000 mm table-size:2300 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:8 t distance between columns:1840 mm distance spindle nose and table:180~1180 mm spindle drive:22/46 kW max. torque on the spindle:140.1/286.5 Nm (S6-25%) spindle nose:50 SK spindle speed:10000 (direkt) U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):7027 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:25 t positioning accuracy:0,020 (gem. VDI/DGQ3441) mm repeating accuracy:0,015 (gem. VDI/DGQ3441) mm CNC controller:Heidenhain TNC 620 automatic tool changer:Optional gear box:BF Getriebe (optional) chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband inner coolant:20 bar CE-design:vom TUEV Used Milling Machine KRAFT VM-3218 with ...

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:750 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW DRO:für 2 Achsen von FAGOR center morse:2 Stück 3 jaw chuck Ø:200 mm Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:1000 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2800 (3 Getriebestufen) U/min longitudinal feed:0,044-0,662 mm/U cross feed:0,020-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::10-125 mm with live steady:10-80 mm power requirement:4 kW center morse:2 Stück 3 jaw chuck Ø:diverse Größen als Option Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter over bed:502 mm turning diameter over slide rest:310 mm turning length:1500/1000 mm centre height:250 mm bed width:300 mm max. workpiece weight between centres:750 kg :225 kg spindle bore:58 mm spindle turning speed range:85-1250 (3 Getriebestufen) U/min spindle nose:A2-6 longitudinal feed:0,05-0,752 mm/U cross feed:0,022-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:69 mm sleeve conus:4 MK quill stroke:200 mm power requirement:5,5 kW Machine size (LxWxH):(Spw. 1500mm) 3130x960x1550 mm machine weight:2090 kg center morse:2 Stück Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix

turning diameter over bed:402 mm turning diameter over slide rest:245 mm turning length:750/1000 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2300 (3 Getriebestufen) U/min longitudinal feed:0.05-0.752 mm/U cross feed:0.025-0.376 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW center morse:2 Stück Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

turning diameter over bed:502 mm turning diameter over slide rest:310 mm turning length:1000/1500 mm centre height:250 mm bed width:300 mm max. workpiece weight between centres:450/750 kg :225 kg spindle bore:58 (opt. 105) mm spindle turning speed range:40-2300 (3 Getriebestufen) U/min spindle nose:A2-6 (A2-8 opt.) longitudinal feed:0,05-0,752 mm/U cross feed:0,022-0,296 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:69 mm sleeve conus:4 MK quill stroke:200 mm power requirement:5,5 kW center morse:2 Stück Brand new Center Lathe KRAFT DLZ 250 Series More information can be found in the appendix

turning diameter over bed:652 mm turning diameter over slide rest:450 mm turning length:1000/1500/2000/3000 mm centre height:325 mm bed width:350 mm max. workpiece weight between centres:1125/1690/2025/2815 kg :360 kg spindle bore:85 (opt. 105/155) mm spindle turning speed range:30-1500 (3 Getriebestufen) (opt. 80-1250/50-800) U/min longitudinal feed:0,05-1,5 mm/U cross feed:0,025-0,752 mm/U metrical thread cutting:0.5 - 15 mm/U threading WHITWORTH:60-2 TPI range of module thread:0,25-7,5 mm :120-4 mm/min. diameter of quill:95 mm sleeve conus:5 MK quill stroke:220 mm fixed steady::Ø 10-180 (180-400 opt.) mm with live steady:Ø 10-140 mm power requirement:7,5 kW center morse:2 Stück Brand new Center Lathe KRAFT DLZ 325 Series More information can be found in the appendix

Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer fo ...

Wächter Packautomatik carton erector, type: Steigenaufrichter, model: Tablomat, machine number: 16734, year of construction: 2005, Becker vacuum pump, type: VT 4.16, number: 1981433, year of construction: 2005, capacity: 16/19 m³ per hour, Nordson hot melt glue unit, model: Problue 10, serial number: SA19B53424, total dimensions carton erector: 7200 mm x 1800 mm x 2800 mm, s/s switch cabinet, dimensions: 1000 mm x 300 mm x 1200 mm.

Paker sleeve machine, serial number: Multipack RC 11-80 U 04 AF 353, year of construction: 2004, 400 V, 3 Ph, 50 Hz, capacity: 80 pack/min, width sleeve infeed: 365 mm, with Nordson Problue 4 hot melt unit, serial number: SA12M90649, 200-240 / 400-230 V, 1/3 Ph, 50/60 Hz, 26 A, total dimensions: 5000 mm x 1550 mm x 2900 mm.