134,051 used machines on RESALE, but how to find them? Machine Search
capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 18 - 100 m/min table height: 890 mm total power requirement: 2,2 kW weight of the machine ca.: 0,99 t dimensions of the machine ca.: 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters suc ...
capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 125 mm : 127 x 125 mm dimensions of saw-band: 1435 x 12,7 x 0,65 mm band speed: 38 - 80 m/min total power requirement: 0,95 kW weight of the machine ca.: 18 kg dimensions: 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cooper / SKF - Batch of industrial bearing housings and bearing components 343KG
Tub volume: approx. 1940 x 1000 x 740 mm incl. Clamping width: approx. 6000 mm
right working side equipped with belt sander left working side equipped with polishing brush revolutions: 1400/2800 rpm for further technical data see photographed nameplate
LDK / Hiwin / Jama - Batch of rod ends, linear bearings and bearings 329KG
FAG - 22340K. MB - Batch of heavy industrial bearings & cast iron bearing blocks
capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 240 mm : saw band length: 2965 x 27 x 0,9 mm table height: mm band speed: 37 / 76 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 1,0 x 1,6 x 1,4 m double miter band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...
cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use. ...
multi spindle bar automatic, Mori Say 8/42 - YOM 2006, CONFIGURATION, - HIRTH coupling for drum locking, - 8 front slides and 8 radial slides, - 4 Compond slides in stations 1, 2, 5, 6, - CUCCHI Pietro bar loader (2007), - Bundle for CUCCHI BLT BUNDLE bar loader (2018), - Pick-up spindle, hydraulic in pos. 8, - preparation for oil fume extraction
Batch of new industrial mechanical shafts / spindles
- neu aufgebaut, neue Elektrik in 2018, - Schnecken-Späneförderer, - Ölnebelabsaugeinrichtung, - Kühlmittelfilter, selbstreinigend, - Doppelschlitten in Lage 6 zum Abstechen und Rückseitenbearbeitung, - Polygondreh- und Gewindefräseinrichtung Lage 4, - CNC-Kreuzschlitten AUTOR in Lage 5, - Abgreifspindel, hydraulisch in Lage 6, - Transportband für Fertigteile, - Stangenlader Iemca PRA
8-spindle lathe, Number of spindles: 8
Mounting band saw Powerful and particularly robust metal band saw with aluminium die-cast saw table and infinitely variable cutting speed for Mitre cuts up to 60° Cutting range at 90 degrees: around 130 mm Cutting range at 90 degrees: square 130 mm Cutting area at 90 degrees: rectangle 130 x 125 Saw blade dimensions 1440 x 13 x 0.65 mm Dimensions L x W x H 350 x 690 x 520 m Belt speed 30 - 80 m/min Total power requirement 1.2 kW Machine weight approx. 19 kg Condition: never used / new (5)
Band saw with - Ideal welding machine - Belt sander - Table tiltable -15° to +45° - Pneumatic height adjustment Roll diameter 400 mm Projection 900 mm Workpiece height 400 mm Table size 700 x 660 mm Saw blade length 4630 mm Speed 45 - 500 m/min Saw belt width max. mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Dimensions LxWxH 1.95 x 0.9 x 2.25 0
Schütte 32 multi-spindle lathe, completely rebuilt by GWM-Tech, Fanuc AC motors, FANUC motors for threading, PLC, pick-up spindle chuck, bar loader Cucchi Pietro
Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 4.250, Weight of the machine ca. [kg]: 7.150, Auto bar loader: Cucchi BLT Multi F-6
Machine number: 693601 Blade length: max. 3320 mm Blade length: min. 3120 mm Table dimensions: 500 x 500 mm incl. saw blade welder and grindstone
19 pieces, various manufacturers such as EWS and WNT 3 pieces of driven holders, suitable e.g. for EMCO lathes 16 pcs rigid holders, tool interface hpts. Square transverse and drill rod, mostly with tools Transport dimensions: 800 x 600 x 400 mm, approx. 50 kg
FAG, Ringfeder, SKF, Tollok - Batch of industrial bearings & clamping elements
Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi
6 spindle bar automatic Gildemeister GS20, compound slide with drive in pos. 1, compound slide with drive in pos. 2, compound slide in pos. 4, compound slide in pos. 5, 4x axial spindle (pos. 1, 2, 4, 5), rotating milling device in pos. 3, pick-up spindle pos. 6, swing rear machining arm drive in pos. 3, swing rear machining arm drive in pos. 6, swarf coneveyor, worm type, set of tool holders, set of cams, Number of spindles: 6, Max bar diameter [mm]: 20, Max bar feed [mm]: 100, Spindle speed [rpm]: 214 - 5.168, Spindle motor [kW]: 11, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Pietro Cucchi
Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Iemca SIR 25 P 33
SKF / FAG / NTN / NACHI / KOYO / TIMKEN - Batch of various bearings 164KG
Consisting of, among other things: anchor bolts, threaded end, washers, bolts and nuts, plates, washers.
Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600
- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - cross drill device pos. 4, - 6 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 4, 5, - 2 radial slides in pos. 3, 6, - double slide in pos. 6, - pick-up spindle pos. 6, - pick-up spindle stop attachment pos. 6, - conveyor belt for finished parts, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, Number of spindles: 6, Max bar diameter [mm]: 32, Spindle speed [rpm]: 250 - 4.250 (250 - 3.350), Spindles interaxis [mm]: 276, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 9.500
Basic Set 2 / 32 pieces for table top thickness 15 and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 2 pcs universal stop 100mm 4 pcs universal stop 150mm 2 pcs universal stop 225mm 2 pcs stop and clamping angle 175mm 1 pc. hole brush 300mm 1 Burner Holder 1 non-stick spray 500ml, natural, organic 1 pc. welding table cleaner 500ml, natural, organic based Condition: never used / new (5)
Timken - Batch of bearings and bearing parts 109KG
Including collet / face cutter holders and various precision boring heads / total: approx. 52 pieces
- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - 2x spindle positioning attachment (pos. 6 + 7), - 8 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 5, 6, - 4 radial slides in pos. 3, 4, 7, 8, - double slide in pos. 8, - 2x pick-up spindle (pos. 4 + 8), - 2x pick-up spindle stop attachment (pos. 4 + 8), - threading attachment, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, - electrical preparation for auto bar loader, Number of spindles: 8, Max bar diameter [mm]: 32, Spindle speed [rpm]: 270 - 3.750 (270 - 3.200), Spindles interaxis [mm]: 360, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 11.500
Gildemeister GM20, Country of origin: Italy, Operating hours: 0, Number of spindles: 6, Max bar diameter [mm]: 20, Auto bar loader: Cucchi Giovanni alternative IMG Easy load
Toprol - Batch of industrial bearings and bearing blocks 187KG Condition: unused
Band saw with - Saw blade welding machine - Whetstone - Saw blades - Documentation Roll diameter 440 mm Projection 420 mm Workpiece height 200 mm Cutting speed 20 - 1550 m/min Table clamping area 560 x 560 mm Saw blade length 3250 mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Space requirements approx. 1.2 x 0.8 x 2.1 m Condition: unchecked (6)
Capacity: 280 l Load capacity: 300 kg incl. device for forklift Reference: Seitz und Strenger - Lot 70 Weight: approx. 84kg
Two flow wrapping machines and a Hugo Beck shrink tunnel are available. 1) Hugo Beck Flexo 500 S flow-wrapping machine, year of manufacture: 2004, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recycled film/half-tube and flat film. 2) Flow wrapping machine Hugo Beck Flexo 500 S, year of construction: 2001, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recyclate film/half-tube and flat film. 3) Shrink tunnel Hugo Beck 5012/25, year of constructi ...
SKF, FAG and INA - Batch bearings and linear technology 225KG
Consisting of batch first-aid kits, screenwash, 2x coffee maker Bosch, work clothes, DVD digital cinema system jvc, sidewalk sign,... Lying on 3 pallets
maximum number of results exceeded
please refine your search
