battenfeld ba used for sale

General SKU050F242 LocationBarneveld MakeGEA Aeromatic-Fielder UK TypeTSG-2-B5-F4, Spray arm/nozzle is missing No.869500 Year of construction1998 Specified Features - Fluid bed dryer batch Material finishMirror polished inside Main Features MaterialStainless steel Volume47 Ltr. Motor3 KW Fluidbed dryers batch Fluidbeddryercheck With pan mounted on wheelsPan equipped with non-sifting Gill plate Capacity47 Ltr. Pan sizesdia. 460x500mm With pumpcheck Can be heated by steamcheck With fanmake Meidinger, type HA-100-M3/825 Capacity360 m³/h Motor3,0 kW, 400/690 Volt (IP55) With dust filtercheck MaterialStainless steel Information With switchgearcheck Total height3,1 m Weight2000 kg CEcheck Floorspacedryer 1,2x0,9 mFluid bed dryers batchGEA AeromaticDryers > Fluid bed dryers batchBrand > GEA Aeromatic What you can expect from Foeth: -- Machine is in working condit ...

General SKU396U1158 LocationBarneveld MakeAZO TypeET200P D800 A23R No.129920 Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station Capacity200 l InletDia: 800 mm Outletdia 200 mm With vibro motor0,15 kW Bag dump stations MaterialStainless steel 1.4301 (304) Information Year of construction2012 Mounted on framecheck Mounted on wheelscheck Floorspace1,10 x 1,05 m CEcheck Total height1,80 m Weight360 kgBag dump stationsAZODosing units > Bag dump stationsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU201W009 LocationBarneveld MakeGEA Niro Pharma systems TypeMultiprocessor No.02563.0010 Year of construction2003 Pressure Sprayercheck Main Features MaterialStainless steel Volume12 Ltr. Motor11 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity6 and 12 litre Pan sizesDia 120x480 mm and Dia 170x280 mm With pumpcheck Can be heated by steamcheck With fancheck Capacity580 m3/h Motor11 kW (400V Ex) With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications- Complete technical file (total 21 folders) - Complete system, including heating system, filters, control valves - Can be used in cleanroom Fluid bed dryers batchGEA NiroDryers > Fluid bed dry ...

General SKU361T1082 LocationBarneveld MakeFerrum TypeDSZ-OR/T 1000/500 No.414-092 396 Year of construction2001 Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Rubber linedhallar chamber Perforated basketcheck Capacity200 Ltr. Basket sizesDia 1000x500 mm Max. loading weight250 kg Hydraulic operatedcheck Liquid outletDia. 100 mm With hydraulic unitcheck Wandfluh HN10-6nvh, motor: 0,75 kW, 230/400 volt, 1380 rpm Motor11kW, 400/690 volt, 1475 rpm Max. basket speed1200 rpm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information Mounted on foundation platecheck Total height1,7 m Weight2400 kg CEcheck Floorspace1,8x2,2 m ATEX compatiblecheck Extra SpecificationsRevised machine! Including: new motor, pulleys, belts, shaft seal, and bearings. Filter area 1.57 m². C ...

General SKU396U1164 LocationBarneveld MakeAZO TypeVB 800 & DFS100x 650 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter800 mm Specified Features - Bag dump station Metering screwcheck Screw diameter95 mm Pitch90 mm Shaft diameter25 mm Screw length900 mm With hoppercheck Capacity800 Ltr. InletDia. 800 mm OutletDia. 125 mm With motor1.1 kW Screw speed150 rpm With vibro motorcheck 0,15kW, 400 Volt (EX) Bag dump stations MaterialStainless steel 1.4301 (304) Information Year of construction6-1996 Floorspace1,5 x 1,5 m Total height3,5 m CEcheck Weight700 kg Extra SpecificationsThis set consists of: - Deposit section (AZO ET 500K) with flap - Product silo - Vibrating bottom, VB 800 B - Output screw, DFS100x 650 - Azo level switch - Pneumatically operated exhaust valve Bag dump stationsAZODosing units > Bag dump stationsBrand > AZO What you can expe ...

General SKU396U1159 LocationBarneveld MakeAZO TypeET800 No.1131091 Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station InletDia. 800 mm OutletDia. 200 With vibro motor0,15 kW Bag dump stations MaterialStainless steel 1.4301 (304) Information Year of construction2012 Mounted on framecheck Mounted on wheelscheck Floorspace0,9 x 0,9 m CEcheck Total height1,40 m Weight210 kg Extra Specifications- Vibro motor 0.15 kW - Pneumatic knocker - Pneumatic outlet valve ø 200 mm - 1 sieve: perforation honeycomb 30 mm Bag dump stationsAZODosing units > Bag dump stationsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

Cutting height:150 mm saw band length:2400 mm cutting width:350 mm total power requirement:380 V weight of the machine ca.:350 kg dimensions of the machine ca.:800 x 950 x 1650 mm

It is a used Opekla Berliner line Magic Baker MB 1600 incl. filling station and additional modules for various products for sale. The line is fully functional and in good condition. Hourly output: 1600 pcs/h The line is immediately available. On request, a video of the production with dough pieces can be sent. Price on request.

Band dimensions: 2625x20mm.

General SKU021B076 LocationBarneveld MakeAeromatic TypeS-4 No.889095 Main Features MaterialStainless steel Volume210 Ltr. Motor10 KW Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) Granulatorcheck With pancheck Capacity210,0 Ltr Pan sizesDia. 900x890mm Capacity20-150 KG With sprayercheck With pumpmake Watson Marlow Can be heated by steamcheck 65 KW With fancheck make Meidinger, type HA-180/M3-710 Capacity0,6 M³/Sec Motor10,0 KW, 380/660 Volt (Ex) MaterialStainless steel 1.4401 (316) Information With switchgearcheck Total height+/- 10 Mtr ATEX compatiblecheckFluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromatic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, Th ...

CNC processing centre Brand: TecnoTeam Type: Enjoy Basic 3 Achsen New machine Save your space: Standing upright means progress for human! - With a vertical CNC machine you save a lot of space: Wether for consuming material or a further machine, you have more space to use in your storage. Easy machine use: - TPA makes the use very easy, you find this software at several well-known machine brands - You see the programmed processings on a virtual display, no matter which process: if circle, bow, linear millings or drillings, - Create job lists in the CAM - Forget the calculator, the machine calculates for you. - For this software several genious tips and tricks are possible. With realiability to success: - Technoteam uses High-Quality components from well-established producers. - We modify the machine exactly to your needs: If you process massive wood, you get a stro ...

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

We can offer the following paper bag machine for Block bottom / SOS bags: Block bottom / SOS bag machines Producer : Windmoeller & Hoelscher Type : Triumph 3 Year app. 1968 Bag width 120 - 260 mm. Tube length 240 - 900 mm. Bottom width 70 - 150 mm. Max. web width 860 mm. Max. mechanical speed 200 m/min. W&H QMS 992 - 4 colour tail end printer 2 unwinds and glue units for 2 ply bags Still in operation: No Available: Now

We can offer: Windmoeller & Hoelscher Type : Triumph 2 Year: 1974 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. Max. mechanical speed 250 m/min. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels With: Bottom patch unit Still in operation: Yes Available: Now

We offer the following Flat- and satchel paper bag machine for sale: Producer : Windmoeller & Hoelscher Type : Matador NP 38 Year : 1994 Bag width : 60 – 380 mm. Cut-off length : 200 – 600 mm. Roll width : 1060 mm. Roll dia. : 1200 mm. With : W&H Alina 650 - 4 colour in-line printer With: Window unit Still in operation: Yes Available: Now

We can offer the following Block bottom / SOS bag machine for sale: Producer : Windmoeller & Hoelscher Type : Triumph 2 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. With : Photocell for pre-printed reels Year approx. 1973 Overhauled by Garant Excellent condition Still in operation: Yes Available: Now

W&H Matador 40 Bag width : 70 – 400 mm. Cut-off length : 180 – 780 mm. Roll width : max. 1250 mm. With a 2 colour in-line printing machine.

We offer a W&H bag machine for the production of conical bags. Still in operation: No Available: now

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

Type: VK 1056, built 2006. Single deck vibratory bar sizer with integrated feeding chute, bar mount and bar rakes in stainless steel, screen frame rubber lined 60° shore, 2 imbalance drives 2,8 kW / 960 RPM, open screen frame on coils, break control, steel construction. Current parting cut at 8 mm; Sizer has only been running for 12 months, therefore it is in very good condition.

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

We offer the labeler after comprehensive overhaul and modernization (including cabinet). The machine is designed for bonding three paper labels on glass bottle. Implementation of fully stainless steel. Labeller is equipped with two stations: - adhesive label front, neck and back label. Scanning system and label transfer is based on the pallets, which select a label from a magazine, transfer it onto the gripper drum and then onto bottle. The machine is extremely stable and reliable. Support comes down to refill glue and charge labels into magazine. Capacity: max. 24 000 b/h. We provide 1 set of equipment designed for a customer bottle. Machine has full 12-month warranty.

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Kat-No 09-1025 New! made of stainless steel Make: Eurolux -very stable experience -Your advantage: can be used as a base frame and as an interlayer frame -All-sided (also with pallet truck) can be underrun Mass and weight: Total height:390 mm Width:760 mm Length:1250 mm Weight:27 kg Price is valid for one item. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Bagging scale (sensitivity = 50 g) for open bags with stainless steel double feeding screw 55 - SS (2 x 1,2 kW for fine and coarse stream), rubber filling nozzle, evaluation unit Speedac 7, pneumatic bag clamp, deaeration device with 2 vacuum probes (swiveling), Rietschle vacuum pump and switchgear. Air consumption: 30 NL/weighing process, aspiration air volume: 6 m³/min.

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

THROW BAND / SPIN / BELT / DIRECT FROM THE MANUFACTURER! -Stable original cast band / belt / conveyor belt made of rubber, specially designed for baling presses (original quality) or many other applications in industry, agriculture, wood u.v.m.! -New, open reinforced, with mounted hook connectors in stainless steel, 2-ply top Supergrip profile, black, running side out fabric -suitable for CLAAS, Stockey & Schmitz and Welger P22/P23 -Name: EP 3-0 250/2, ceiling -Dimensions: length 2,040 mm x width 300 mm Shipping will be by UPS! On request, we can customize the conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, pl ...

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L 3,00 H 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_stea m_turbine_14_bar/all_pictures.zip Here you can download the scope of supply      (13 MB):  abc.stromerzeuger-discount.d ...

BAZ ideal for room door production with tool changer Lock box milling unit separate from the side Belt milling or drilling units on the other side incl. tools

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

Cat.-Nr. 09-1025 new Standard Features: • Strong Frame Construction • Possible to use as Basis and Intermediate Storage • Movable with Low Lifting Elevating Truck Measurements and Weight: Total Height: 390 mm Width: 760 mm Length: 1250 mm Weight: 27 kg The price is for one barrel. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type choice: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our sepa ...

Valve basket unit in Exchange

Basket valve in Exchange

- Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Arbeitsbereich Z - Achse 400 mm -B- Achse Frässpindel ist +/- 90C parallel zu X-Achse schwenkbar - Frässpindel luftgekühlt 5,5 kw - Spindel Drehzahl stufenlos 18.000 rpm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren Delta / YASKAWA - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 40 m/min - max. Arbeitsgeschwindigkeit 20 m/min - Arbeitsgenauigkeit 0.05 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten - BECKER Vakuumpumpe trockenlaufend, luftgekühlt, Leistung 129 m3/h - Werkzeuglängen Sensor - CAD/CAM Software DDX EasyWOOD Standard - Steuerung OSAI - Schnittstelle Ethernet/USB/CompactFlash Card - Sicherheitslichtschranke Vorschrift nach EN 848-3 (Optional einseitig, zweiseitig oder dreiseitig je nach Aufstellungsgeg ...

Technische Daten: - Verfahrbereich X - Achse 2900 mm - Verfahrbereich Y - Achse 2160 mm - Verfahrbereich Z - Achse 200 mm - Arbeitsbereich X - Achse 2850 mm - Arbeitsbereich Y - Achse 2130 mm - Arbeitsbereich Z - Achse 70 mm - Lade- Entladegeschindigkeit 15 m/min - Frässpindel luftgekühlt HSD / Italy 9.6 Kw HSK 63 (Option 11 kW HSK 63F) - Spindel Drehzahl stufenlos 24.000 rpm - Werkzeugwechsler,Karusell 8-fach, mitfahrend - Bohraggragat VERTIKAL 5 + 4 FAM / Italian 5 Spindeln in Y-Richtung, Bohrabstand 32 mm 5 Spindeln in X-Richtung, Bohrabstand 32 mm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren YASKAWA - hochgenaue THK Linearführungen mit Langzeitschmiereinheit in X, Y, Z Achse - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 80 m/min - max. Arbeitsgeschwindigkeit 25 m/min - Arbeitsgenauig ...