132,173 used machines on RESALE, but how to find them? Machine Search
A used Esback Köhler Fettbaker is currently for sale and immediately available in our warehouse in Bielefeld. Fat Baker Esback Charcoal Burner - Fat baker with proofer - 380 Volt 50Hz - Grease trays inner dimensions: 89x73cm
Various sizes, including 100x100 cm; total approximately 200 pieces Auction-ID: A1-40136-319
A used deck oven Friedrich E6 8/6 is for sale and is immediately available in our warehouse. Deck Oven Friedrich E6 8/6 Bakery Oven - 6 shelves each 80x60 cm - Each floor can be controlled separately with bottom and top heat - Each floor with separate steam box - each floor with glass/sight glass - With exhaust hood incl. fan -digital control - Shelves flaps are made of glass (visible) - Floor entrance height approx. 12.5 cm - Exhaust hood protrudes 22cm at the control - 3.3kw per floor, all together 19.8 kW
Convection oven Wiesheu B15-EM for 1 rack trolley 60x40cm. Oven for 1 rack trolley from Wiesheu type B15 with 15 supports for 60x40cm trays. The furnace runs with a high-voltage connection and has a fixed water connection for the generation of steam (procurement). The digital control has a program memory. The stove is immediately available in stock. -digital control - for 60x40cm trays - Voltage: 400V - Frequency: 50Hz - Power: 20.8 kW - Rated current: 30.1 A - Year of construction 08 / 2013
A used deck oven Friedrich E4 1.2/6 with 4 shelves is currently for sale and immediately available in our warehouse. Deck Oven Friedrich E4 1.2/6 - 4 shelves each 120cm wide and 60cm deep - With digital control - 160mm Bac Chamber Height - 18.20 kW - With exhaust hood - Year of construction 2016 Dimensions: 155cm wide 220cm high
Oven for 1 rack trolley from Wiesheu type B15 with 15 supports for 60x40cm trays. The furnace runs with a high-voltage connection and has a fixed water connection for the generation of steam (steam). The digital control has a program memory. The stove is immediately available in stock. Convection oven Wiesheu B15TS300 -digital control - for 60x40cm trays - with a rack trolley - Voltage: 400V - Frequency: 50Hz - Power: 20.8 kW - Rated current: 30.1 A - Year of construction 12 / 2006
cutting diameter: 500 mm saw band length: 6990x41x1,3 mm cutting width: 860x500 mm cutting speed: 15-90 m/min Feed: 400 mm/min Rapid movement: 2500 mm/min main drive motor: 5,5 kW cutting length min.: 8 mm total power requirement: 8,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,3x1,2x2,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1986 Forte SBA 401.S 1. designation of the machine Forte band saw 400x400 mm 2. manufacturer of the machine: Forte 3. year of construction: 1986 4. intended use of the machine Sawing of metallic materials 5. current condition: Used, ready for operation on inspection TECHNCAL DATA Working range Rods and tubes up to 0 400 resp. Maximum cut-off length 600 mm Double feed 1. 200 mm Power requirement ca. 9,5 KW Sage drive motor power 4, 7 / 6 K I Gearbox for Sage drive Stober R 65VI•/ 4 Cutting speed I 12 - 50 m/min. Cutting speed Il 24 - 100 m/min. Sage belt dimension 6.200 x 38 x 1,2 mm Hydraulic oil ca. 46 Liter Viscositat 68 est bei 4□0c ca. 50 Liter (empfohlen "Curtis S 6") ca. 3.000 kg Coolant 800 mm Weight of the machine Material support height Find more here - / Contact us at -
HAVER & BOECKER 6 Nozzle Bagging plant KEY DETAILS : - Plant is a semi-automatic machine. It is possible to adjust the speed of rotation. Depending on how fast the bags are put on by hand. - Mechanical modification from 50kg bags to 25 kg bags in 1999 - Conversion to the latest state with spare parts support in 2015 - Controls: Siemens S7 - Supported bag types: Lime, hydrated lime, cement, gypsum - Different products can be bagged; the grain sizes can be adjusted.For example, if you want to use only 3 of the 6 nozzles, you can easily take some nozzles out of service. Find more here - / Contact us at -
in 8 pallet bins (included) Auction-ID: A1-41994-115
Bar Tensioning System - Post-Tensioning System DYWIDAG 4 pieces of post-tensioning systems for reinforcing steel Pressing force 60 tons for rod types up to WR 32 Piston stroke 50 mm Piston area 132.54 cm² Operating pressure max. 500 bar Length of the jack 401 mm Total weight of the 4 presses 160 kg
Containers are not part of the lot Auction-ID: A1-40106-222
In-store baking oven Miwe Aeromat 8.68 60x80cm with proofer Miwe In-store baking oven 8.68 with proofer - Type: Aeromat 8.68 T FP 12 - for 8 trays 60x80 cm or 16 trays 60x40 - 8 Editions - Longest shelf - Mobile on castors - Year of construction 2006 -Technical data oven: 400/230 V - 50 Hz - 21 kW - Proofer US-2.0-S built in 2006 - 60x80cm trays - 16 Editions - Technical data proofer: 230 volts - 1/N/PE, 2.2 kW 50 Hz Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 135 cm
Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display
Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH
Key data: 40 kg, 1100 mm, 630 mm
Stock number: 3973 BALANCING MACHINE Manufacturer: SCHENCK, Type: R 2 N Machines NO.: ARD 0537, Year of manufacture: 1974 Specifications: Max. diameter 630 mm mm Max. tool weight 0.3 - 40 kg. Max. workpiece length 1100 mm Steuerung New Control VMI APT Balancing Spindle speed 450 - 1800 rpm Length: 1300 mm, Height: 1200 mm, Width: 500 mm, Weight: 800 kg
In-store baking oven WIesheu Type: Dibas Dibas 64 blue S 5 editions for 60×40 cm trays with proofer digital control Self-cleaning program Door with internal sliding mobile on castors Checked & cleaned, very good condition Specifications: Year of Make: 2016 400 V – 50 Hz Dimensions: Height: 207 cm Width: 95 cm Depth: 100 cm
maximum number of results exceeded
please refine your search
60 € 
