battenfeld ba used for sale

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

The BTS drum press PLC auto is ideal for compressing 30 to 220 litre steel drums, but it can also be used to compress plastic and cardboard drums very easily. In many cases this compressed recyclable material can then even be remarketed. The barrel press is particularly characterized by its reliable and easy operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, save significantly on your disposal costs and properly return the material to the recyclable material cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phases) Noise: 68 dB PLC control with automatic pressing cycle 30 litre drip pan with drain tap Pressing punch with mandrels for pi ...

Balancer, weight balancer Carl Stahl Type: 7241 - 06 Load capacity: 75 - 90 kg Rope length: approx. 2.2 m New ! Dimensions: 470 x 260 x 200 mm

Balancer, weight balancer AUTOSTAT 7211-2 1 - 2 kg 2 m rope Dimensions: 150 x 120 x 70 mm

Balancer, weight balancer TECNA 9312 1 - 2 kg 1.6 m rope Dimensions: 140 x 110 x 50 mm

Balancer, Weight Balancer, Spring Balancer TECNA 9311 Payload: 0.4 - 1.0 kg Extension: 1600 mm used, tested ! Dimensions: 200 x 120 x 60 mm

Balancer, Weight Balancer, Spring Balancer BOSCH 0 607 950 920 092 109 Payload: 0.3 - 1.2 kg Extension: 1100 mm used, tested ! Dimensions: 180 x 100 x 70 mm

Baking Plates for EWA Baking Machine for Molded Cones - Condition: used - Wafer Length: approx. 130 mm - Wafer Diameter: approx. 30 mm

Baking Plates for PRO 1 Baking Machine - Condition: used - Engraving (Lower Baking Plate): approx. 5 x 5 mm - Engraving Depth (Lower Baking Plate): approx. 1,45 mm - Wafer Sheet Thickness: approx. 3 mm - Connecting Shaft: approx. Ø 16 mm - Collar radius: approx. 96,5 mm

THONET 204 RH Bar Stool Auction-ID: A7-46320-90

Repacking station for big bags or open bags. Including feed hopper with vibrating function, folding box and screw conveyor Availability: immediately Condition: in working order, well-maintained

THONET 204 RH Bar Stool Auction-ID: A7-46320-91

Seplos Home Battery 17 kWh – Home Battery Energy Storage Seplos home battery 17 kWh for energy storage and solar panels. Smart, scalable home battery for sale Consisting of 3 pieces New Seplos Home Battery 17 kWh The Seplos Home Battery, a powerful and scalable solution for energy storage in the home or business. This Seplos home battery 17kWh is designed for storing solar energy and optimizing self-consumption. Ideal for households and installers looking for a reliable home battery / home battery with high capacity. ✅ Key features Capacity: 17 kWh Brand: Seplos Type: Home battery / home battery Application: Solar panel energy storage Scalable: Expandable with multiple modules Use: Residential and light business ⚡ Advantages of a Seplos home battery More self-consumption of solar energy Lower energy costs Less dependent on the electricity grid Suitable for hybrid and off ...

Belt spiral mixer for powder and granules with hydraulic mast - 950mm diameter - Pneumatic outlet flap - approx. 120 litres filling volume - made of stainless steel - Drive power: 2.2 kW - 52 shaft revolutions per minute - Adjustable shaft speed - With hydraulic mast (0.55 kW)

Blobel Spill Barrier can be rotated on one side The ideal solution if you want to secure the area of a lifting platform or dock leveller. The barrier is stationary and can be rotated on one side, easy to handle, versatile and flexibly convertible from manual to automatic. The rotating and clamping device is permanently mounted next to the opening to be secured and sealed against the structure. The locking body is screwed into the swivel joint and stands vertically next to the opening in the resting position. It is secured against unintentional folding down in accordance with the UVV. In the event of an emergency, the fuse is unlocked, the leak lock is folded down and locked in the clamping device. The contact pressure of the clamping lever is adjustable, ensuring a secure seal. In the basic version, the barrier body is folded down manually, and an automatic system can be ...

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

Dimensions: 2700 x 997 x 1597mm (wxdxh) Electric Boiler Stainless Steel, including 6 baskets. 20 liters, 20kW, 400V. A stainless steel produced boiler with an electric tilting element of 20kW has a baking capacity of 2 to 2.5 kilos of fries per basket. The tilt element makes the kettle easy to clean. Full touch control screen including PID control, allowing for an even better temperature control. Baking tray, hard chromed surface plate 595x520mm. Automatic grease filter system, with pump pipe. You can easily remove the fat/oil filter and pump back to the desired boiler or the grease barrel, if the pump pipe is is connected. Please note; Disassembly costs are for the buyer. Auction-ID: A1-40105-76

6Tables width 50cm 4Benches with backrests 11Benches without backrests Auction-ID: A1-45889-557

Stollen table white, edges 2 mm ABS with storage compartment under table top Note: Pallet in exchange Auction-ID: A1-45889-173

Ratio: 1.16:1 Auction-ID: A7-46311-50

Ratio: 1.16:1 Auction-ID: A7-46311-45

Ratio: 1.16:1 Auction-ID: A7-46311-46

Ratio: 1.16:1 Auction-ID: A7-46311-44

In stock on pallet, overall dimensions approx. 1200x800x530 mm Auction-ID: A1-45790-482

In stock on pallet, overall dimensions approx. 1200x800x530 mm Auction-ID: A1-45790-522

Battery from former Linde Service 1030x1000x800mm Voltage in idle mode uncharged 84.54 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1144

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3578

Battery from former Still Service Comes from Still RX60-30 with only 5,300 operating hours. With REMA 320A connector and Aquamatic water filling 1030x700x780mm Idle voltage measured uncharged with good performance of 85.03 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1050

Brand: Bramidan Type: X25 Machine: Vertical baler Press force: ± 25 tons Drive: Hydraulic Voltage: 400V (3-phase) Application: Carton/Plastic Extra info from labels Hydraulics/engine: Brand: Danitech Power: ± 4.0 – 4.8 kW Voltage: 230/400V Speed: ± 1430 rpm Auction-ID: A3-43524-11840

Battery from former Linde service very good performance measured at 52.25V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1146

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.31 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1010

Battery from former Linde Service Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1044

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 52.33 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1162

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.90 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1123

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 51.23 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1134

Battery from former Linde Service very good performance measured at 54.40V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1054

Battery from former Linde Service 1020x1000x800mm Voltage at rest uncharged measured with good performance of 83.39 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1056

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3534

Battery from former Linde Service 830x730x630mm Voltage in idle mode uncharged 50.98 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1095

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3451

Battery from former Still Service 830x730x630mm Voltage in idle mode uncharged 49.8V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1048

Battery from former Linde Service 830x630x630mm Voltage in idle mode uncharged 51.76 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1160

Batteries from former Linde Service Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1127

Battery from former Still Service Comes from Linde E30 with only 6,800 operating hours. With REMA plug and Aquamatic water filling 1020x850x630mm Voltage at rest uncharged measured with very good power of 85.63 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1171

3 PIECES 24V 375Ah batteries from former Linde Service Very good performance measured at 24.99, 25.05 and 25.46V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1132

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.