battenfeld ba used for sale

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Model: Active Mixer 200 Year: 2020 Condition: Used Serial Number: 10446009 Stock Number: 3302 Mixer: 200 litres Semi-automatic tempura- and battermixer with programmable recipe management Water: 2 - 5 Bar Power: 3 x 400V, 50Hz, 7kW Dimensions: 1250 x 950 x 1800 mm Weight: 400 kg

BBA Pumps BA150KS DriveOn® – Diesel-driven sewage pump | DEMO MACHINE, We offer a demonstration machine of the reliable and efficient BBA Pumps BA150KS DriveOn® — a professional dry self-priming sewage pump, ideal for the contracting and rental market., Pump specifications, Max. Capacity 400 m³/hour, max. head 27 mwc, connection DN150 (6), debris passage 100 mm, and a screw channel impeller for vibration-free pumping — even with air bubbles or high speed., , DriveOn® diesel engine (Stage V), Maintenance interval of 1,500 operating hours — 66% less maintenance than conventional engines. Variable speed 1,300–1,700 rpm, engine power

Two used autoclaves from Steriflow BarriQuand type S364 and S363.together with loading conveyors. Autoclave Specifications: Chamber capacity 5700 liters. Maximum operating temperature 150 °C. C Maximum operating pressure 5 bar Supply Voltage 400V Power 4 kW Dimensions 4700mm x 1700mm Weight approx. 2.5 T Year of manufacture 1987 Acid-resistant design.

Alteco 1000 Liter tank Pressure vessel 11 bar

Model: Backsaver ST Year: 1999 Condition: Used Serial Number: 990216-3 Stock Number: 3253 Tipping height: 980 mm With rechargable battery and CTEK MXS 7.0 charger Tipping angle: 0 - 90° Working load: max 900 kg Container: 1000 x 1200 x 800 mm Power: 1Ph, 230VAC, 50Hz Dimensions 1400 x 1350 x 1150 mm Weight: 300 kg

This genset is equipped with DSE 8610 MKII and motorized breaker applicable for net synchronization., , Surplus Unused 2023 Generator., Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch; Gross weight [kg]: 7250; Registration Number: 1; Engine: Baudouin 6M33G660/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1100

BasysPrint 867 1500DPI Fully Automatic with 4 Cassettes and Bacher Punch One laser module with 2560 hours, optionally a second module can be offered. Operating counter plates: 404960 pieces Machine was discontinued due to plate conversion to thermal Dismantled by BasysPrint technicians and secured for transport. If you are interested, videos of the functionality can be sent via WhatsApp BasysPrint 867 1500DPI fully automatic printer with 4 cassettes and Bacher die-cutting unit One laser module with 2560 hours of operation; a second module is available as an option. Plate counter: 404,960 The machine was sold due to a plate conversion to thermal printing. Dismantled and secured for transport by BasysPrint technicians. If interested, videos of the functionality can be sent via WhatsApp.

diameter range 10-24 mm Forging power 7-20 to thread length plunge method 195 mm daylight 160 mm max. pitch 3,5 mm roller bore 80 mm roller width 235 mm roller length 195 mm

Used Baader fish fillet machine type 483. Year of manufacture 1993.

General SKU437X1383 LocationBarneveld Pressure Working pressure shell45 Bar Vacuum possible shellcheck Working pressure tubes25 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface30 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface30 m² Tube capacity190 l. Number of tubes:40 Tube diameter25 mm Tube length10 600 mm Wall thickness tubes2 mm Max. temperature250 Shell capacity420 l. Shell diameter400 mm Shell length6 400 mm Max. temperature250 Shell connectionsDN80 Cover connectionsDN80 Information MakeK.ley Eiterfeld Serial5654 Magento base g_extra_specificationsPressure -1/25 bar, volume 190 l., allowable temperature 250°C, jacket volume 420 l., pressure -1/45 bar, 30 m2, own weight 1800 kg, drawin ...

Cross milling machine Bartezaghi 2BE 250 Spindle length 240 mm Maximum milling height 250 mm Spindle diameter 40 mm Spindle speed 5600 RPM 9kw motor Pneumatic material pressure Desktop control

A condensation soldering system Rehm is available. Process medium: Galden/perfluoropolyether, process chamber sealing: hermetic, profile control: injection principle, max. process temperature: approx. 240°C, filter: Galden filter, machine dimensions X/Y/Z: approx. 2200mm/1300mm/1650mm, weight: approx. 1250kg. Including various accessories and spare parts. Documentation available. An on-site inspection is possible.

Servo motor, gear motor, electric motor, three-phase motor -Manufacturer motor: Bautz type M256D-ON101-7000-0-EC -Voltage: 330 V. -Torque: 0.53 Nm -Speed: 5800 rpm -Gearbox manufacturer: Neugart PLE 60 -Translation: i = 3 -Shaft: Ø 14 x 30 mm -Design: B14 -Price: per piece -Number: 3 pieces -Dimensions: 260/55/H80 mm -Weight: 2.4 kg

Servo motor, gear motor, electric motor, three-phase motor -Manufacturer engine: Bautz type M404D-B0101-7000-0 -Voltage: 330 V. -Torque: 0.95 Nm -Speed: 6200 rpm -Holding brake: 2 Nm -Manufacturer gearbox: Neugart WPLE 60 -Translation: i = 3 -Shaft: Ø 14 x 30 mm -Design: B14/angle -Dimensions: 260/165/H105 mm -Weight: 5.2 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, temperature switch, thermostat, expansion valve, safety valve -Manufacturer: Hansa, safety valve, unused, original packaging -Type: KSV 28 bar 2442280050 -Connection: G1/2 -Price: per piece -Number: 7 pieces -Package dimensions: 150/80/H55 mm -Weight: 0.6 kg/piece

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Manufacturer: Balkancar, electric chain hoist with trolley -Load capacity: 125 kg -Main stroke 8 m/min -Delivery head: 12 m -Protection class: IP44 -Dimensions: 320/250/H660 mm -Weight: 31 kg

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Height-adjustable pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck, high-lift truck, pedestrian stacker -Manufacturer: BAKA, high lift truck type EGGT 69-1604 -Bemerjung: without battery -Load capacity: max. 1600 kg -Lifting height: 2250 mm -Height: 1670 mm -Width: 870 mm -Length: without tines 1630 mm -Tines: length 800 mm / 80 x 40 mm -Dimensions: 2500/870/H1670 mm -Own weight: 2050 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 1.1 kW -Design: B3 -Diameter shaft: 40 mm -Protection rating: IP 54 -Height shaft axis: 155 mm -Long distance between holes: 115mm -Hole spacing across: 200 mm -Number: 1x motors available -Price per piece -Dimensions: 580/270/H260 mm -Weight: 49kg

DC, geared motor -Power: 3 kW -DC motor: Manufacturer Baumüller, type DSG -Speed: 6000 rpm -Transmission: Manufacturer Nord Type 2282AZ-IEC 80 -Translation: 1:11,81 -Hollow shaft diameter: 35 mm -Speedometer: Manufacturer Stegmann Type DG 60L XSR 500 Pulse/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 605/240/H200 mm -Weight: 30 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow rate: m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes -Emergency lighting with charger and controller and batteries -Dimensions large lamps: 665/180/H120 mm 36 pieces -Dimensions small lamps: 420/170/H90 mm 14 pieces -2x items of lamps: with charger and control available -Price: per item -Weight: 820 kg/item

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

DC motor, gear motor, electric motor, spur gear motor, manual transmission -Electric motor speeds: 160/1000/2500 rpm -Power: 5.1/32/32 kW -Volt: 100-400V -Protection class: IP 22 -Gearbox manufacturer Woerner type: MVD -hydraulic: switchable -Construction: B3 -Diameter shaft: Ø mm -Dimensions: 1430/1200/H750 mm -Weight: 1740 kg

three-phase motor, electric motor -Power: 4 kW -Speed: 2900 rpm -Shaft: Ø 28 x 60 mm -Recess: Ø180 mm -Bolt circle: Ø215 mm -Hole spacing lengthwise: 140 mm -Hole spacing across: 190 mm -Design: B5 -Protection class: IP 44 -Dimensions: 380/300/H250 mm -Weight: 33 kg

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Electric chain hoist with: chassis -Load capacity: 250 kg -Main stroke: 8 m/min -Fine stroke: 2.4 m/min -Hakenweg: 3.4 m -Dimensions: 385/500/H800 mm -Weight: approx. 40 kg

Gear motor, electric motor -Manufacturer gearbox IP type: MRV10F1 -Engine manufacturer: MGM BA71B4 -Speed: 93 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 460/160/H210 mm -Weight: 14.7 kg

Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: O 30 mm - Hole circle: O 115 mm (O12 mm) -Protection class: IP 54 -Number: 2x gear motors available -Price per piece -Dimensions: 520/240 / H220 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 32.5 rpm -Power: 0.75kW -Angle -Type: B5 -Diameter shaft: Ø 35 mm -Brake: 24V -Protection class: IP 65 -Number: 1x geared motors available -Price per piece -Dimensions: 560/300/H240 mm -Weight: 42kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 40 bar -Liter output: 11 +4 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 1.5 kW 1410 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Price: per piece -Number: 3x available -Dimensions: 600/1000/H850 mm -Weight: 220 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Motor Bauer type: DK94V10/216 -Manufacturer: Gearbox Bauer -Motor power: 0.75 kW -Speed range: 30 to 210 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 20 mm -Dimensions: 450/320/H485 mm -Weight: 64 kg

adjustable gear motor, variable speed gear motor, electric motor -Adjustment is missing -Transfer in current condition as seen -Manufacturer Motor Bauer type: DK94V10/216 -Manufacturer: Gearbox Bauer -Motor power: 0.75 kW -Speed range: 30 to 210 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 20 mm -Dimensions: 400/258/H475 mm -Weight: 58 kg

Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm -Weight: 292 kg/piece

Basic - feed-in unit, feed-in module, inverter, frequency converter, frequency transformer, drive inverter, controller, variable speed drive -Type: BUS622-15/22-54-0-000 -Input: DC 540 V/640 V -Output: 3AC 360V/425V 3x15A 0-300Hz -Number: 3x servo power units available -Price: per piece -Weight: 7.3 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Frieseke & Hoepfner, hydraulic unit MKP R 14 / 9-1.6 -Motor: AEG 1.5 kW / 1400 rpm -Pressure: up to 450 bar -Delivery rate: 1.6 l / min -Individual components: see photos -Hydraulic tank: with level indicator -Dimensions: 1520/630 / H820 mm -Weight: 260 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Sold as is, in its current condition -Motor housing: Repair weld, see photos -Manufacturer: Frieseke & Hoepfner, hydraulic power unit MKPR 6/1.6 -Motor: AEG 1.1 kW / 1400 rpm -Pressure: up to 450 bar -Flow rate: 1.6 l/min at 1450 rpm -Individual components: see photos -Dimensions: 580/290/H485 mm -Weight: 46 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams -Hydraulic cylinder: lifting cylinder BVS 172 -Stroke: 50 mm -Piston: Ø 65 mm -Number: 2x cylinders available -Price per piece -Dimensions: Ø 100 x 210 mm -Weight: 6.0 kg/pc.

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: Lifting cylinder BVS 536 -Stroke travel: 150 mm -Piston: Ø 100 mm -Dimensions: Ø 150 x 270 mm -Weight: 24 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: lifting cylinder BVS 443 -Stroke: 160 mm -Piston: Ø 125 mm -Dimensions: Ø 180 x 310 mm -Weight: 42 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: lifting cylinder CX 60A-200 -stroke: 200 mm -Piston: Ø 80 mm -Pressure: max. 800 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 120 x 300 mm -Weight: 18.7 kg/piece

Three-phase synchronous motor, geared motor, electric motor, servo motor -Manufacturer: Baumüller, Servomotor three-phase synchronous motor -Type: DSOG 100-K -Speed: 3000 rpm -Power: 11 kW -Transmission: SEW type R82 LP90 i= 10.22 -Speed: 1400 / 137 rpm -External fan: W2S130-AB03-10 -Shaft: Ø 50 x 100 mm -Design: B3 -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 1050/285/H345 mm -Weight: 116 kg

Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, servo power unit BUS624-38/55-54-0-000 -Built-in control device: Controller BUS 6E -Type: BUS6-E-SM-0012-A011-0000 -Number: 3x devices available -Price: per piece -Dimensions: 300/165/H380 mm -Weight: 11.9 kg/piece

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 10-20 mm acetylene 6 bar -Cutting range: 10 to 20 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 24 pieces available -Total Cost -Total weight: 1.2kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete -Total weight: 1.1 kg