119,582 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
Battenfeld BA 1000/200 CDC Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 640 x 590 Clearance between columns (hxv) [mm] 370 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 175.9 Injection weight [g] 160 Injection pressure [bar] 1137 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11.2 Heater power [kW] 7.88 Dimensions and weight Net weight with control cabinet [t] 4.3 Dimensions (L x W x H) [m] 4.4 x 1.8 x 1.8
Battenfeld TM 750/210 Closing unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./max. mold height [mm] 200 Maximum opening width [mm] 730 Injection unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g] 95 Injection pressure [bar] 2042 Dimensions and weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m
Battenfeld HM 60/350S injection molding machine – year of production 2008 – 41421h number – working hours worked. Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 550 x 530 Clearance between columns (hxv) [mm] 370 x 320 injection unit Screw diameter [mm] 35 Injection volume [cm3] 169 Injection weight [g] 153.8 Injection pressure [bar] 2083 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 10.4 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.79x1.24x1.88 – control b6
Battenfeld HM 500/3400 S injection molding machine Year of production - 2006 Control: Unilog B6 Injection unit… / 3400 S Screw diameter: 65 mm Specific injection pressure: 2500 bar Injection volume: 1244 ccm Shot weight: 1070 g Crimping 500 / ... Strength: 500 t Board dimensions: 1590 x 1470 mm Clearance between columns: 1000 x 800 mm Tool height: 450… 1600 mm Opening for a path of 1150 mm Distance plates: 1600 mm - 1 x pneumatic valve - 1 x NW6 hydraulic core movable plate - Connection via robot. Euromap 67
Wittmann/Battenfeld Makro Power E 450/2250 injection molding machine Year of production: 2013 Control: UNILOG B6 Closing force: 4500 KN Distance between columns: 950mm x 700mm Minimum mold mounting height: 330mm Maximum mold mounting height: 780mm Screw diameter: 65mm Specific injection pressure: 2070 bar Maximum injection weight: 980.9g ServoPower S1 package (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo electric (Knodler) with a jet actuator, injection speed 400 mm/s (servo injection control significantly reduces electricity consumption costs and supports precise regulation of the injection process) Electric ejector with a force of 60 KN and a path of 180 mm Additional equipment: 1. Air valve 2. Cooling water flow regulator 3. Digital interface to the temperature controller (possibility to control six thermor ...
Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...
Battenfeld TM 3500 / 1900 Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./max. mold height [mm] 300-710 Maximum opening width [mm] 1380 Injection unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions and weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7.60 x 1.80 x 2.40
Battenfeld HM 500/5100 injection molding machine Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1470 x 1260 Clearance between columns (hxv) [mm] 900 x 720 Min./max. mold height [mm] min 450 Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 85 Injection volume [cm3] 2412 Injection weight [g] 2195 Injection pressure [bar] 2110 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 37.3 Dimensions and weight Net weight with control cabinet [t] 26 Dimensions (L x W x H) [m] 6.9 x 2.4 x 3 m Instrumentation: EUROMAP 67 robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving plate 8 x hot runner controls bimetal injection system ejection plate
Brand BATTENFELD Type EM 75-120 Unilog B4 All-electric Year of manufacture 2005 Clamping unit Clamping force 75 ton Opening stroke 800 mm Beam dimension (h x v) 405 x 405 mm Installation height min. 150 mm Installation height max. 480 mm Injection unit Screw diameter 18 mm Injection volume 30 cm³ Injection weight PS 27 gr Injection pressure 2440 bar Dimensions and weights Dimensions LxWxH 4.5 x 1.7 x 2.0 m Machine weight 4500 kg
Producer Battenfeld Type 25/50 Unilog B2 Year 2006 Clamping unit Clamping force 25 ton Opening stroke 450 mm Distance between tie bars 270 X 270 mm Mould height min. 150 mm Injection unit Screw diameter 14 mm Injection volume 15 cm³ Shot weight 7 g Injection pressure 2650 bar Measurements and weight Dimensions 2,25 X 0,90 X 1,30 m Machine weight 1100 kg
Seller: GINDUMAC GmbH
This Battenfeld HM 2P 800-7700 Injection moulding machine was manufactured in 2003 in Austria. This machine has an injection unit with a screw diameter of 120mm, specific injection pressure of 1361 bar, and a calculated stroke volume of 5655 cm³, enabling a maximum injection weight of 5146 g. With a clamping force of 8000 kN, clear tie bar spacing of 1120x1020 mm, and platen size of 1620x1530 mm. The mould height is adjustable from 450 to 1100 mm, with an opening force of 480 kN. It operates with a drive power of 110 kW. Contact us anytime for further information.
Seller: Szczep-pol s.c.
Key data: 3000 kN
Battenfeld EcoPower SE 300/1330 / Electric Machine Year of construction: 2012 Injection unit: Screw diameter: 50 mm Spray weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot Interface Air valve x 8 Hot runner control x6 Injection unit hardened - Bimetal Parallel Movements It is possible to change the screw diameter for fi 45, 55, 65 mm Metrics: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our service techni ...
Seller: Szczep-pol s.c.
Key data: 3000 kN
Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of construction: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Injection pressure: 2500 bar Dosing volume: 772 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 710x630 mm Size of clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Hot runner control x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection The machine is equipped with a new original auger and cylinder Robot Wittmann W818 4-axis, high-speed ...
Seller: Szczep-pol s.c.
Key data: 3000 kN
Wittmann Battenfeld EcoPower 300/750 / Electric machine / production line with Wittmann W821 robot and conveyor belt Year of construction: 2012 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1250x1110 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6S - Touchscreen Additional equipment: Production line with Wittmann W821 robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Perfect technical condition Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Automatic tool height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of construction: ...
Seller: Szczep-pol s.c.
Key data: 2700 kN
Battenfeld TM 2700/1900 Year of construction: 2002 Injection unit: Screw diameter: 65 mm Spray weight: 981 g Spray pressure: 1777 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 270 t Tie bar spacing: 630x630 mm Size of clamping plates: 940x940 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Euromap Robot Interface Air valve x 2 Hydraulic core pull x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Central lubrication Automatic tool height adjustment Parallel Movements Metrics: Weight: 11800 kg Length/Width/Height: 7.08x1.70x2.20 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...
Seller: Szczep-pol s.c.
Key data: 1600 kN
Battenfeld TM 1600/750 Year of construction: 1999 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit : Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: It is possible to install Euromap interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 6000 kg Length/Width/Height: 5.05x1.51x2.09 m Drive: Pumps/motor: 22 kW Heating capacity: 13.8 kW Total power: 35.8 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Pric ...
Seller: Szczep-pol s.c.
Key data: 1300 kN
Battenfeld BA 1300V/315 V-R / Vertical injection moulding machine with rotary table Year of construction: 1997 Injection unit: Screw diameter: 40 mm Spray weight: 182.9 g Injection pressure: 1575 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 454x740 mm Size of clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Turntable: 1250 mm The vertical injection unit - screw diameter fi 35 mm Metrics: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technica ...
Seller: Szczep-pol s.c.
Key data: 900 kN
Wittmann Battenfeld Smart Power 90/350 / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 35 mm Spray weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 90 t Tie bar spacing: 470x420 mm Size of clamping plates: 680x660 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 24,000 in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Proportional valve on the injection unit – precise injection It is possib ...
Seller: Szczep-pol s.c.
Key data: 1000 kN
Battenfeld TM 100/525 Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Metrics: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate ...
Seller: Szczep-pol s.c.
Key data: 500 kN
Battenfeld TM 500/210 Year of construction: 2002 Injection unit: Screw diameter: 30 mm Spray weight: 96.5 g Injection pressure: 2042 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Central lubrication Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.51x1.18x1.63 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...
Seller: Szczep-pol s.c.
Key data: 450 kN
Battenfeld HM 45/60S with the Wittmann W702 sprue picker / machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 30 mm Injection weight: 31.1 g Spraying pressure: 1100 bar Dosing volume: 34.2 ccm Clamping unit : Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Control Panel Additional equipment: Machine in very good technical condition Operating hours: approx. 39,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection It is possible to buy the machine with the Wittmann W702 sprue picker for additional payment Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x ...
Seller: Szczep-pol s.c.
Key data: 450 kN
Battenfeld HM 45/60S / Machine in very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 30 mm Injection weight: 20.8 g Spraying pressure: 1100 bar Dosing volume: 22.9 ccm Clamping unit: Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 37,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating capacity: 3.3 kW Total power: 14.3 kW All offered machines are started by our service ...
Seller: Szczep-pol s.c.
Key data: 350 kN
Battenfeld Plus 350/75 Year of construction: 1997 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Euromap 12 Robot Interface Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 350 kN
Battenfeld Plus 350/75 Year of construction: 1996 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 350 kN
Battenfeld Plus 350/75 Year of construction: 2007 Injection unit: Screw diameter: 25 mm Injection weight: 44.6 g Injection pressure: 1575 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B2 Additional equipment: Air valve x 1 Metrics: Weight: 1000 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 50 kN
Wittmann Battenfeld MicroPower 5/7.5 / Electric motor / Operating hours: approx. 300 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 14 mm Injection weight: approx. 2.5 g Injection pressure: 2500 bar Dosing volume: 3 ccm Clamping unit: Clamping force: 5 t Size of clamping plates: 240x400 mm Ejector: electric Control: UNILOG B6 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Built-in vacuum pump from the Becker brand Automatic height adjustment of the injection unit Metrics: Weight: 1370 kg Length/Width/Height: 2.09x0.97x2.50 m Drive: Heating capacity: 2.45 kW A ...
Seller: 01machinery s.r.l.
Description TWIN HELIX EXTRUDER BATTENFELD GLOENCO Screw Diameter 90 mm L/D 30 Automatic Sreen Changer NORDSON EH-35 Produced Material PP & PE
Seller: 01machinery s.r.l.
Description TWIN HELIX EXTRUDER BATTENFELD GLOENCO Screw Diameter 90 mm L/D 30 Automatic Sreen Changer NORDSON EH-35 Produced Material PP & PE
Complete injection unit with 40 mm screw Repair required
Seller: AUER
with spare screw, high-pressure hose and various spare parts - see pictures
Seller: AUER
various spare parts incl.
Seller: PLAMA Engineering GmbH
Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.
Seller: PLAMA Engineering GmbH
Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.
Seller: PLAMA Engineering GmbH
Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr
Seller: PLAMA Engineering GmbH
Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.
Seller: BlowMolderSale
Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition
Materials: PP, PS // Film Width (Max): 850 mm
The injection molding machine is fully operational, it is constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 35,000 h.
Seller: Lovric Maschinenhandel e.U.
Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone
Seller: BlowMolderSale
Well maintained machines. Extruder 50/20D. Double head 100 mm stitch.
Clamping force [kN] 1800 Clearance between columns (hxv) [mm] 580 x 520 Min./max. mold height [mm] 225-550 Injection unit Screw diameter [mm] 45 Shot weight [g] 325,6 Injection pressure [bar] 2100
Clamping force [kN] 4500 Clearance between columns (hxv) [mm] 950x700 Min./max. mold height [mm] 330/780 Injection unit Screw diameter [mm] 65 Injection weight [g] 980.9 Injection pressure [bar] 2070
Injection unit Screw diameter: 50 mm Closing unit Closing force : 1800 kN Distance between tie-bars: 560 x 560 mm Other Commissioning: 1998 Tonnage: 180
Seller: Lovric Maschinenhandel e.U.
Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone
Seller: Vanto Machines
Used machine in good condition. Available for immediate delivery. - Clamping force: 1.600 kN - Screw diameter: 50 mm - Injection pressure: 1.714 bar - Injection volume: 442 cm? - Distance between tie-bars (h x v): 570 x 520 mm
Seller: Vanto Machines
Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg
Seller: Markus Hirsch GmbH
Power: 5,5 KW Receiver: 50 L weight of the machine ca.: 0,450 t dimensions of the machine ca.: . m feed pressure: 330 bar liter capacity: . l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Seller: Markus Hirsch GmbH
The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Seller: POL-SERVICE JACEK MAJCHER
For sale Extruder Cincinnati CMT45L - used in very good condition. It is possible to perform a complete overhaul of the extruder. Extruder Cincinnati CMT 45L, used from 1995 Screw diameter: 45/96,9 Screw length: 1025 mm Main motor power: 16 kW DC cylinder heating power: 9,75 KW Cylinder cooling: oil capacity 60 – 100 kg/h More information on request.
Seller: Remax Kunststofftechnik
See PDF attached
