battenfeld ba used for sale

Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel

Digital Miwe FP Control for 4 sheets 60c40 cm with fermentation chamber with swath destroyer Built in 2004 Technical data: 400V/230V/50Hz/8.5kW Dimensions with hood: Height: 182 cm Width: 90 cm Depth: 90 cm

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

Stainless steel clad large glass front digital control 10 editions for 60x40 cm sheets with cabinet, all in all: 16 editions for 60x40 cm or optionally also 8 editions for 60x80 cm sheets Dimensions: Height: 220 cm Width: 95 cm Depth: 80 cm Technical data: 400V -3N - 50Hz - 17.4 A - 12 kW

Ultrasonic banderolier ATS US 2000 AB; good condition; maintained and verified by ATS Customer Service; Bandwidth 30mm; Frame 360x260mm; extendable large roll magazine; Automatic or foot operation. Ultra sonic banding machine ATS US 2000 AB; good condition; cleaned and checked by the support of ATS; band width 30mm; Frame 360x260mm; big size magazine; automatic or foot switch.

2930-12-378-7717 5260981120

2930-12-378-7720 5260981220

Used oven MIWE, type: Electric 5.1820 DS -In bakery condition- - DS control - Haze hood with fan - Condition: Good, ready to use - Delivery costs: on request - Number of flocks: 5 pieces Baking area per stove: 1.80 x 2.00 m Total baking area: 18m2 Electrical power: 112 kW The oven is in good condition and ready to use. Visit and test run on request. A dismantling is necessary and can be taken over by us.

Type of machine: Semi-automatic dosing machine for loose products Portion: up to 2000g (2l) Accuracy: +/- 5g (available option +/- 1g) Power: 230V, 1 phase Emptying: foot-lever Material: food grade stainless steel Hopper volume: 120l (ca.50kg of roasted coffee) Dimensions(H x W x L): 1808mm x 751mm x 743mm LR 2.3 is designed for dosing such products as: coffee beans, nuts, seeds, grains, rice or noodles. The device is working in half-automatic mode. The operator pours the material to be portioned into the main container, then sets the desired weight and starts the dosing process. After weighing the required amount the operator puts a bag under the funnel and empties the weighing container by stepping on a foot-lever. The next charge starts automatically after the weighing container is emptied. In the meantime the operator ha ...

Walterwerk Kiel - Jupiter 95 Baking system for rolled sweet croissants Condition: Used Capacity: approx. 5,400 pieces / hour Squirrel length: max. 120 mm incl. winding head incl. conveyor belt incl. cooling tower incl. stacking table

Ribbon roundwirer for Seewer Rondo Kombi roll-out machine

Kiener Straffbanderolier Auto Skinetta 450 with slinging chain strap and shrink tunnel with bar chain strap and hot air blower sideways and from above. Siemens Control Film width 40-450 mm

HABUSCH BANDSAEGE TYPE CY355 - Half-automaat - Hydraulic - Traploos adjustable snelheid 20/80 m/min - Dubbel vertek - Zaagdruk hydraulic instelbaar - Koeling - Zaagblad 3770 x 34 x 1.1 mm - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

KESMAK BANDSAEGE TYPE KMY DG 350 - Half-automaat - Hydraulic - Traploos adjustable snelheid 20/100 m/min - Verstek - Zaagdruk hydraulic instelbaar - Koeling - Zaagblad 4860 x 34 x 1.1 mm - Noodstop - Documentatie - Weight 1260 kg - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

- Vibration measurement - Balancing in one level - Balancing in two levels - Iterations Method - Trans-red method - Machine weight: 15 kg - Condition: very good Details well-maintained vibration measuring device

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...

McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)

McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.

McIntyre Semi-automatic Terminator Metals Baler Designed to act as both a baler and a heavy duty yard shear, effectively combined to create one robust unit. New features The McIntyre Terminator combines all the best of McIntyre’s baler technology with several new features. Innovations include a sorting table which surrounds the front and sides of the bale box, acting both as an aid to loading and as a safety barrier between the operator and the lid. The Terminator also comes with a bale track which carries baled material away from the machine to an ideal height ready for unloading.

KARMETAL BANDSAEGE TYPE KMT 250 CRAFT DM - Traploos instelbare lintzaag snelheid - Dubbel vertek - Zaagdruk hydraulic regularbaar - Snelspanklem - Koeling - Automatic afslag - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Horizontal automatic band saw machine make RÜSCH type AS 300Sawing range up to: 310 mmor: 310 x 310 mmSection length min: 4 mmSection length max: 500 mmCutting speed: 20 - 70 m / min.infinitely adjustableCutting pressure: approx: 2 - 35 kg, infinitely adjustableSaw band dimensions: 4,150 x 27 x 0,9 mmDrive power: 3.0 kWWeight: approx: 1.300 kgFootprint L x W x H: 2000 x 2300 x 1500 mmWith- Pliers feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-column CNC fully automatic bandsaw make MEBA type 430 AMachine -No: 6397 Year 1999Cutting area around 90 °: 430 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0 flat 90 °: 430 x 430 mmCutting speed stepless: 18 - 95 m / minCutting pressure: 10 - 40 bar - stepless hydr.Saw band: 5800 x 41 x 1.3 mmSaw blade tensioning: hydraulicMaterial feed Single stroke: 0 - 600 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0 Multiple stroke: 0 - 6000 mmRemaining length manual operation / automatic: 20/70 mmWorking height: 750 mmHydraulic unit: 35 - 40 lCoolant tank: approx. 120 lTotal power requirement: 7 kWDimensions approx: 3100 x 2500 x 2000 mmWeight approx: 3200 kgWith- Control SIEMENS COROS OP 15- hydraulic belt tension- stepless saw blade drive- hydr. Full stroke material tension in front of and behind thexa0xa0 Saw band with m ...

Horizontal band saw machine make BEHRINGER type HBP 400 AMachine -No: 182171 built in 1982Technical specifications:Working area around: 400 mmSquare working area: 400 x 400 mmstepless cutting speed: 16 - 100 m / min.Material feed length: 800 mmSaw band dimensions: 5800 x 38 x 1.3 mmDrive motor: 5.5 kWTotal power: 7.5 kWWeight approx: 3200 kgDimensions approx: 3000 x 2450 x 1850 mm:with- chip conveyorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Water basin heated according to photos. 230Volt, 1,200Watt Sthf0o Heating infinitely adjustable from 0-100%. Lows in different sizes to cover the water surface.

CNC controlled horizontal automatic band saw make BEHRINGER type HBP 220 A CNCMachine -No: A7-46485-187164 built in 1987Technical specifications:Cutting area round 220 mmCutting area square 350 x 220 mmCutting speed stepless 20 - 140 m / minSaw band dimensions 3720 x 32 x 1.1 mmDrive power 3.0 kWDimensions 2400 x 800 x 1500 mmWeight approx 1000 kgWith- CNC Control- Enter the data for length and quantity- Chip conveyorused, in very good conditioncontrol defective - sale as spare parts dispenser or rebuildspecial pricePrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Fully automatic horizontal band saw machine make AMADA type HA 250Machine -No: 461216 built in 1990Technical specifications:Saw range around: 250 mmSawing area flat: 175 x 300 mmSaw band thickness / width / length: 0.95 / 25 / 3505 mmSaw blade: 3505 x 25 x 0.95 mminfinitely variable belt speed: 27-40-54-68-80 m/minautomatic feed : 0 - 800 mmElectric drive saw band/hydraulic: 2.2 / 0.75 kWWeight approx.: 1200 kgused, not functional as a spare parts donorPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal automatic band saw make MEBA type Mebamat 250 A-5Make -No: 31164, year of manufacture 1972Technical specifications:Cutting range round: 250 mmCutting area flat: 250 x 250 mmmax. section length: up to 400 or up to 800 mmSaw band dimensions: 3800 x 25 x 0.9 mmfeed rate hydr. infinitely variablestepwise cutting speed adjustable: 20 - 104 m/minSaw drive: 1.1 / 1.5 kWHydraulic: 1.1 kWelectr. Connection:380VRequired space L x W x H: 1970 x 1620 x 1230 mmWeight: 900kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw make PEHAKA type HS 260Year of construction 1981Cutting area around 90 °: 260 mmCutting area flat 90 °: 400 x 155/370 x 180 mmCutting area square 90 °: 220 x 220 mmCutting area around 45 °: 170 mmCutting area flat 45 °: 160 x 145 mmCutting area IPE 45 °: NP 24stepless saw blade speed: 20 - 60 mm / min.Saw band size: 3650 - 3700 x 25 x 0.9 mmDrive power: 0.75 kWWeight approx: 360 kgOutside dimensions approx: 2200 x 1000 x 1300 mmWith- Returning deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw machine make PEHAKA type HS 340Machine -No: 27354 for semi-automatic workflowTechnical specifications:Working space 90 ° round: 340 mmWorking area 90 ° flat: 340 x 500 mmWorking space 45 ° round: 230 mmWorking area 45 ° flat: 200 x 300 mmControl range: 12 - 80 m / minSaw drive: 4 kWSaw band: 4860 x 32 x 1.1 mmRoll diameter: 500 mmRequired space: 2700 x 1600 x 1900 mm highWeight: 1050 kgWith- Infinitely variable cutting speed- hydr. Raising and lowering the saw frame- Control panel on the saw armused, in good working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw machine make HESKA type HES 260Fabr. -No: 20709.01, year of construction 2001Tehnical data:cutting areaaround 90 °: 260 mmaround 45 °: 160 mmflat 90 °: 525 x 120 mmflat 45 °: 160 x 260 mmSquare 90 °: 260 x 260 mmflat 45 °: 160 x 160 mmMiter adjustment required by turning the jawsSaw engine approx. 0.6 / 0.8 kWCoolant engine approx.: 0.09 kWCutting speed: 15-90 m / minSaw blade dimensions: 3660x25x0.85 mmNet weight approx: 360 kgSpace required approx.: 1900 x 800 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Reimelt fat baking plant 8 in rows with jam syringe, with exhaust air hood incl. extinguishing function. -Power consumption 80 kW -Nominal current approx. 116 A -Fuse 160 A -Protection class IP54 -Control voltage 230 VAC 24VDC -Three-phase current 400 V 3N 50Hz

Horizontal band saw make JAESPA type W 260Fabr. -No: 14759 built in 1989Technical specifications:Cutting areas90 ° round: 260 mm90 ° flat: 410 x 200 mm90 ° square: 260 x 260 mm45 ° round: 250 mm45 ° flat: 220 x 220 mm45 ° square: 245 x 210 mmSaw band speed continuously: 17 - 106 m / minSaw band dimensions: 3660 x 25 x 0.9 mmDrive power: 1.1 kWExternal dimensions approx .: 1950 x 950 x 1600 mmWeight approx: 520 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical band saw make JAESPA type MSP 4Machine -No: 714630, built in 1971for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 420 mmCutting height: 325 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmcontinuous belt speed: 15 - 300 m / min.Table size: 600 x 600 mmTable left: left 15 ° / right 45 °Band saw blade length: 3200 - 3400 mmDrive power: 1.0 / 1.5 hpWeight: 400 kgExternal dimensions: 920 x 640 x 1850 mmColor greenWith- stepless band saw speed- Bandsaw welder IDEAL BS0 16 mm with scissors- Grindstone- near tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

-Hot air oven Torero Store 4 -for 4 sheets 60x40cm -Built in 2012 -10 kw -2 floors Matador Store 6.4 -per floor one sheet 60x40cm -Built in 2012 -per floor 6.7 kW -Base 6.4.600

Vert. Metal band saw machine make JAESPA type MSU 4 CMachine -No: 1060578 Year 1978Roll diameter: 420 mmusable projection or cutting width: 405 mmmax. cutting height: 450 mmTable size: 615 x 615 mmTiltable table: 10/15 °Belt speed continuously up to: 250 m / min.Saw band size: 3640/3625 x 20/3 mmDrive power: 1.0 / 1.5 kWDimensions L x W x H: 900 x 850 x 2000 mmWeight approx: 470 kgWith- Bandsaw Welder Ideal BS 16- chip air compressor- Cutting device for band saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical metal band saw make PEHAKA type USM 4Mash. -No: 3305175/5127Projection: 410 mmCutting height: 300 mmCutting width: 385 mmBandwidth: 3 - 13 mmRoll diameter: 400 mmTable size: 610 x 610 mmTable load: 50 - 80 kgTable tilt: 35 ° R / 12 ° LTape length from: 2900-3040 mmSawing speed: 15-90 / 300-1800 mm / minDimensions: 800 x 1000 x 2150 mmSaw drive: 0.8 / 1.1 kWWeight approx: 400 kgWith- Bandsaw welder IDEAL BS 0-16- Grindstone- tiltable tableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical band saw make WESPA type MSP 4Mash. -No: 621092for sawing steel, stainless steels, nickel alloysGray, temper, cast steel and similar materialsRoll diameter: 400 mmCutting height: 280 mmProjection (cutting area): 400 mmBandwidth max. : 25 mmstepless belt speed: 0 - 150 m / min.Saw blade size: 2880/2980 x 25 x 0.9 mmOutside dimensions approx: 900 x 700 x 1800 mmWith- Banded butt welder IDEAL BS 25- Grindstone- tiltable tableused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Index HE 25 with rod feed hydraulically controlled with long turning device

Vertical metal band saw machine make JAESPA type MSU 4 CRoll diameter: 420 mmusable projection or cutting width: 405 mmGreen cutting height: 450 mmTable size: 615 x 615 mmTiltable table: 10/15 °Belt speed continuously up to: 250 m / min.Saw band size: 3640/3625 x 20/3 mmDrive power: 1.0 / 1.5 kWDimensions L x W x H: 1100 x 1000 x 2000 mmWeight approx: 470 kgWith- Bandsaw Welder Ideal BS 16- chip air compressor- Cutting device for band saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical bandsaw Fabr. Mössner type SSF 1050Machine -No: 25331 Year 1982xa0xa0xa0xa0xa0Technical specifications:Projection: 1050 mmCutting height: 550 mmRoll diameter: 500 mmHeight clearance table / band saw guide: 530 mmProjection in width over 2 rolls: 485 mm: over 3 rolls: 1050 mmSaw band length over 2 rolls: 3920 mm:: over 3 rolls: 5250 mmSaw band width :: 3 - 20 mmTable size (worktable): 750 x 1050 mmTable size (additional table): 450 x 450 mmTable tilt :: 2 u. 4 sided 15 inclinablestepless cutting speed: 15 - 940 m / min.Cutting speed overdrive: 2350 m / min.Max. Melting height: 15 mmDrive power: 4.0 kWWeight approx: 1740 kgExternal dimensions approx: 2100 x 1000 x 2100 mmWith- Band saw blade welder Ideal BS 25- scissors and grinding motor- Stepless saw blade speed via PIV control gearbox- Voltage indicator hydr.- Air pump- exchangeable aluminum castors with vulcanised hard rubber ...

Vertical metal band saw machine MÖSSNER type SM 420Masch. -No: 19357 Year of construction 1971Technical specifications:Roll diameter: 420 mmCutting height: 265 mmThroat: 410 mmSaw band length: 3150 - 3260 mmSaw band width: 3 - 16 mmTable size: 600 x 600 mmTable inclination: 30/15 °8 band saw speeds: 12 - 375 m / min.Table height: 1020 mmDrive power: 1.1 / 1.7 kWWeight: approx. 590 kgExternal dimensions approx: 980 x 870 x 1850 mmWith- Band saw welding machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical band saw and band filing machine make JAESPA type AS 4Fabr. -No: 735401, built in 1973Technical specifications:Roll diameter: 420 mmCutting height under guidance: 450 mmCutting width: 400 mmBelt speed: 16 - 1600 m / minSaw band length: 3200 - 3400 mmTable size: 660 x 660 mmTable load: 350 kgSaw motor: 2.2 kWGrinding motorExternal dimensions L x W x H: 660 x 900 x 1920 mmWeight: 690 kgwith- Band saw welding machine BSO-16- grindstone- tiltable table- Attack- lighting- Emergency stop switchused, from a company liquidation,in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical band saw machine make MÖSSNER type Rekord SM/ 400Machine -No: 14464, built in 1965Technical specifications:Table size according to the manufacturer: 600 x 600 mmTable tiltable up to: 15°Projection: 400 mmCutting height: 260 mmRoll Diameter: 400mm6 cutting speeds: 12 - 750 m/minSaw band length: 2780 - 2980 mmDrive power approx.: 1.1 kW 380 VDimensions: 1000 x 750 x 1800mmWeight approx.: 340 kgWith- Band saw welding machine IDEAL type BSO 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

-2 shop ovens on top of each other -any oven with seperate Miwe MUCS control -each oven for max. 8 sheets 60x40cm -Door stop left -oven can be used on wheels -both furnaces sidn with swath box for steam -with exhaust hood (not visible in the picture) -Built in 2000 -400 volts -28 kw

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.

Circulating air oven Miwe Aero 4.0604 DUO used shop ovens Miwe Aero DUO with fermentation cabinet for sale, we have 8 pieces of this oven in stock. -2 pieces of 4 ovens on top of each other -per oven for 4 sheets 60x40cm -with Miwe FP control -with fermentation chamber -with swath capacitor -Door stop left -17 kW -Built in 2007

20-09-Edge Banding Machine WOODLAND MACHINERY (new) Price 7300 Eur. + VAT Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Initial heating of the workpiece by air Edge Milling Transport Dimensions Weight 600 kg

2 plies, 4 colours Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

The machine has been dismantled and has been in our warehouse since 2015, it is used and was in use in a turkey slaughterhouse with underbeam, conveyor belt and articulated rupee.