battenfeld ba t used for sale

Drum pliers, round profile pliers TAKRAF ZFH 025 ( ZFH025 ) 250 kg Gripping width: 370 / 630 mm used, tested ! Dimensions: 1000 x 780 x 520 mm Weight: 34 kg

Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse -Manufacturer: Korrmann, compensating traverse for transporting different loads -Type: TRV 12 -Loading capacity: 12 t -Transport dimensions: 260/10000/H560 mm -Empty weight: 980 kg

Demag hoist 10 ton Kind of: hoist Capacity: 10 ton Drop: 6,5 meter Tackle speed: 0,6 & 6 m/min

Key Equipment Specification: 1 of Gas Turbine: Manufacturer: Solar Model: Titan 130 Operating hours: 3000 Variant: 20501 GSC Combustion Standard: Non Solonox (conventional) Year Of Manufacture: 2012 Rated Output: 15MW Fuel: Gas Only 1 of Speed Reduction Gear Box: • Manufacturer: Solar Turbines • Type : EPICYCLIC • Ratio: 7.4648:1 • Rated Power : 26,251HP • Input Speed1; 11,197RPM • Output Speed : 1,500RPM • Overload Factor: 1.1 • 1 of Generator: • Manufacturer: ABB • Rated Output: 22,789 KVA • Power Factor: 0.8 • Voltage: 11KV • Frequency: 50Hz • Speed: 1,500RPM SCOPE Gas Turbine Assembly (Non SoLoNox) Speed Reduction Gear Assembly Shaft Coupling Exhaust Gas System Enclosure Ventilation System Generator Air Inlet System Fuel Supply System. SCOPE Colling Water System Compressed Air System Fire Fighting Syste ...

Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,

Mazak Quick Turn Smart 250M L Turning-Milling Center CNC Model Hersteller [manufacturer]: Mazak Germany Type [ type]: Quick Turn Smart 250M L Control unit: Mazatrol smart Incl. handwheel Baujahr[construction year]: 10/2016 Weight [weight]: 6500kg Approx. (L x D x H): 3.4m x 2.0m x 2.0m Full documentation is available. Various accessories after consultation. Top Zustand / condition From first hand, from Germany. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you.

2x Tapping back-pressure turbine with spur gearbox and generator Nr1: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 3800 kW Speed: l0000 rpm Steam inlet pressure max. : 37 Steam inlet temperature max. 44 degrees Tapping pressure max. : 24 Tapping temperature : 390 degrees Evaporation pressure : 2 Normal absorption capacity : 27 t/h Maximum absorption capacity : 32 t/h Gearbox Make Voith, St.Pölten Type D 64 Rated power: 5,700 HP Speed 10 OOO/1 5oo rpm Backpressure steam turbine + gearbox + synchronous generator incl. auxiliaries Nr2: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 43oo kW Speed: 9900 rpm Steam inlet pressure max. 24 atü Steam inlet temperature max. 42o 00 Exhaust steam pressure 2 ata Normal absorption capacity 35 t/h Maximum absorption capacity 35.7 t/h Gearbox Make BHS  ...

Turret Handler Ismeca Semiconductor NX16 Specifications: Supplier name: Ismeca Malaysia Construction year: 2011 Accessories: AssLabeling Laser A000 966 Find more here - / Contact us at -

Steam turbine for sale. The turbine was built in 2012, is in good condition and is no longer in operation. Model SST-060 Turbine with impeller in so-called constant-pressure design ("action wheel"). The turbine rotor is mounted on two bearings and consists of the above-mentioned impeller and a shaft, which are connected to each other by means of Hirth gearing. The impeller is located outside the bearing and consists of one piece. The blades are milled out of the solid disc. Live steam pressure: 13.0 ´bara at turbine flange Live steam temperature: 191.6 ´C at turbine flange Live steam flow max: 10,000 kg/h Exhaust steam pressure: 5.2 bara at turbine exhaust flange Turbo generator sound pressure level: 92 dB(A) z 3 dB(A) measured at a distance of 1 m Coupling power: 275kW Total terminal power: The tolerance is 1.0%. 265kWe The pressure drop for the cyclone to be provided sh ...

Turbo Tech Centrifugal Air Compressor Model: Til-4800 Compressor Stage: 3 Flow Rate: 80 m3/min Coupling Power: 374 kW Electric Power: 415V/50Hz/3Ph, IP23 Motor IE Standard: IE3 Motor type: ODP Inlet condition: 1.013barA, 35°C, Humidity 80% Main Motor Manufacturer: SIEMENS Motor Starter: Inverter Starter with Synchronous Bypass Service factor: 1.0 Air and Oil Cooling pipe material: Copper-Nickel For any inquiries, please contact: 1. email: zulaika.kamarudinn@gmail / rozitah@topglove.com.my 2. Contact Number: i. Ms. Zulaika: 012-9037331 ii. Ms. Rozitah: 018-2814801

Electroplating test system for high flow / separation It does not have a control/transport cart and has not yet been used. That was our model system. It is a separator bath with 3 positions The positions are designed for vertical and horizontal arrival including a 25mm movement of goods. The buyer can view the system, and also dismantle it. High-performance test containers for ViaFill and AR 1:40 Features: - Aspect ratio up to 1:40 - Multifunctional system for panel & pattern plating, blind micro via plating, via filling plating, button and bridge plating - Suitable for flex circuit substrates up to 6.2 mm thick - Segmented anodes with 3 inert anodes per PCB - 372 slots for eductors with horizontal flow per PCB - Two-dimensional fabric movement in the copper cell The copper cell: Our copper cell is designed for PCBs from 18" x 25" to 21" x 24". Hydrodynamic conditions are gu ...

Three-phase oil transformer DIN 42500 The four impellers/ wheels are also exist and included the external dimensions are approx. Width 1.4 m Length 2.2 m Height to top edge of LV connection bolt 2.0 m Hermetic version with DGPT2 and Euromold plug connections Find more here - /

2x GE Frame 6B gas turbines # Technical Summary Equipment Details - Gas Turbines: Two GE MS 6001 B gas turbines paired with AEG generators (Type S7102/2). - Operation History: - Commissioning: 1981 - Gas-fired Operation: Until 2005, primarily for base load (~7000 hours/year). - Operational Hours in Combined Cycle: - GT21: ~167,000 hours, ~1130 starts - GT22: ~159,000 hours, ~1180 starts - Retrofitted: In 1996 with water injection for NOx reduction. - Conversion: In 2007 to peak load operation using heating oil (HEL) with new steel chimneys and upgraded control systems to ABB Procontrol 14. - Operational Hours in Peak Load: - GT21: ~130 hours, ~177 starts - GT22: ~150 hours, ~180 starts - Last Network Operation: 2015 - Last Oil Service: - GT21: October 2015 - GT22: September 2016 - Last Borescope Inspection: December 2016 - Defect: Heating oil transfer line issue in 2 ...

2020 Neumaier Industry Factory Train FT830 Route tugger train. DESCRIPTION: The object of realisation is a Factory Train FT830 tugger train from the company Neumaier Industry Description: - The tugger train was only used a few times / year of construction 2020 - Unladen weight 3578 kg / permissible total weight 7178 kg - Payload 3600 kg / 1800 kg per wagon unit on 3 pallets or transport trolleys - Length 10.8 m, width 1.6 m, height 2.3 m - Active steering system - Electronic braking system Main components: - FT830 initial module - EV6 frame Goods carrier - Main module FT830 - EV6 frame product carrier - End module FT830 Current condition / photo documentation: Find more here - / Contact us at -

AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -

Model: DOTR 63000/123 Rated Power: 50 / 63 MVA High Voltage (HV): 115 kV High Voltage Tapping Range: +9 / -9 x 1.778% (adjustable under load) Insulation Level HV: 123/550/230 kV Low Voltage (LV): 31.5 kV Insulation Level LV: 36/170/70 kV Tertiary Voltage: 6 kV Insulation Level TW: 12/75/28 kV Frequency: 50 Hz Vector Group: Yynyn0(d) Cooling Method: ONAN / ONAF Maximum Oil Temperature Rise: 60 K Maximum Winding Temperature Rise: 65 K Ambient Temperature Range: -25°C to 40°C Impedance: - At 50 MVA: 15.8% (± IEC-Tolerance) - At 63 MVA: 21% (±7.5%) No-Load Losses: 12.5 kW (+IEC-Tolerance) Load Losses at 50 MVA: 154 kW (+IEC-Tolerance) Noise Power Level at ONAF (No Load): 80 dB(A) Weight Details: - Shipping Weight: Approx. 87,500 kg - Weight of Oil: Approx. 15,300 kg - Active Part: Approx. 58,500 kg - Total Weight: Approx. 89,800 kg Dimensions: - Shipping Dimensions ...

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18-T - Spindle Nose: ASA 6 - Spindle Power: 18.5Kw - Turning Diameter: 310mm Turning length: 200mm - Main spindle speed: 3500 - Sub spindle speed: 3500 Number of tool positions for the first turret: 12 Number of fixed tool positions for the first turret: 12 Number of second turret tool positions: 12 Number of fixed tool positions for the second turret: 12 :::D DIMENSIONS AND WEIGHT::: Length: 2800mm Width: 2240mm Weight: 7000Kg

:::TECHNICAL SPECIFICATIONS::: CNC model: Fanuc - CNC version: 21 TB - Spindle nose: ASA 6 - Spindle power: 11Kw - Turning diameter: 240mm Self-centering diameter: 160mm - Turning length: 130mm - Main spindle speed: 4000 - Sub spindle speed: 4000 Number of tool positions for the first turret: 10 Number of second turret tool positions: 10 Fast feeds for linear axes X Y Z: 24m/min Gantry loader: yes Chip conveyor: belt

Product number: 3086B Type: TD600 Serial number: 151 Belt width: 600 mm Product height: max 40 mm Power: 3 x 415V, 50Hz, 0.45kW Dimensions: 1900 x 1000 x 1500 mm Weight: 200 kg

gebr. CNC Long Short Turning/Milling Center with B-Axis Hours: 7200 Control: Fanuc 31i-A Processing length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Bar passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power sub-spindle: 2.2 kW Main spindle speed: 10,000 rpm Sub-spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear beams: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110x1,200x1,885 Weight: 3,300 kg Conversion from longitudinal to short turning Deep Hole Drilling Stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross Drilling Rear Conveyor Fire extinguishing system FMB Bar Feeder Minimag 20, YOC 2012 The machine can be viewed under power by arrangement. Changes and errors in the technical data and informa ...

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

used lifting tipper HK 600 (table / tabletop device), suitable for Diosna 160 and 200 kneading machines, height 140 cm

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - /

Manufacturer: Ansaldo Year of Manufacture: 1999 Technical Data Listing Generator - Type: Three-phase synchronous generator GSCR 800Y4 - Power: 7,250 KVA - Voltage: 10,500V - Frequency: 50 Hz - Phase Number: 3 - Number of Poles: 4 - Rated Current: 398.8A - Power Factor: 0.80 - Rated Speed: 1,500 rpm - Spin Speed: 1,800 rpm - Insulation Heat Resistance Class: F - Ambient Temperature: 40°C - Moment of Inertia of the Rotor: 118.75 kgm² - Winding Connection: Star - Excitation Voltage Rating: 41.2/158.3V - Rated Excitation Current: 54.2/152.3A - Operation Mode: Continuous - Protection Class: IP 4 - Cooling Water Quantity: 660 l/min - Cooling Water Inlet Temperature: 40°C - Cooling Water Inlet Pressure: 4 bar - Air Inlet Temperature: 45°C - Bearing Type: Rolling bearing - Bearing A-side: EMZLB18-200 - Bearing B-side: EMZLQ18-200 - Min. Clearance Shaft/Bearing: 0.267mm - Max. Clearance S ...

Carousel lathe TITAN SC 27

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. Inlet and overflow, water level gauge, anti-vortex plate, etc. can be offered additionally. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tanks, V4A Volume: 12,500 L Dimensions: Ø 2.35 × 3.10 high incl. feet Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tank with flat bottom Volume: 40,000 L Dimensions: Ø 3.00 × 6.00 m high The tank can be equipped with a new agitator or pump on request. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Mitsubishi Heavy Industries Ltd Type - SC1F ( Single Cylinder Single Flow ), Condensing Steam Turbine Power : 205.440MW HP Steam : 85 ata, 538 C LP Steam : 5.5 ata 193 C Steam Turbine Generator Model : MB-H Power - 241, 680 KVA Voltage - 16.5KV, 50 Hz

heavy 40s Gillardon with cross table

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: Green Transfo Type: Minera MP Year of manufacture: 2024, unused Number of units available: 9 pieces Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal steel tank with inner coating Suitable for; Extinguishing water or rainwater On request, the tank can be provided with an anti-corrosion coating. Fire brigade connections (A-coupling, suction line), inlet and overflow, new dome DN625 can also be ordered. Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Control Siemens Sinumerik 840D Bar passage 65 mm Speeds 5,000 min-1 2 x 12-speed revolver with attached revolver Competition. Turret 1 with Y-axis Parts collection facility Belt filter system Conveyor Bar loading magazine IRCO Profimat

horizontal steel tank with inner coating, pressure tank Can be used underground and above ground Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin) Can be used above or below ground, can be used as a firefighting water tank or rainwater tank Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and depending on demand, the tank can be equipped with a brand-new dome, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (glass enamel) Can be used above or below ground Volume: 8.4 m³ Dimensions: Ø 2.20 m × 2.50 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Used machine, Woma Twinjet 550 Z - 250 M Working pressure: 550 Z, P35 1,300 bar-143 lpm, 250 m, P18 2,500 bar-31 lpm Year of construction 2014 Drive: electric 500 kW Operating hours: approx.: 1,305 h, 3 gun Control , and accessories

Steel tank with inner coating (glass enamel) Can be used above or below ground, e.g. as a rainwater tank Volume: 8.4 m³ Dimensions: Ø 2.20 m × 2.50 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (glass enamel) Can be used above or below ground, e.g. as a rainwater tank Volume: 8.4 m³ Dimensions: Ø 2.20 m × 2.50 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Key data: 100 °C

Tool temperature control unit - HB-Therm HB-100Z1 Years of manufacture: 2013 and 2014 Description: Max. heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended Price: On request

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Manufacturer: Bell Maschinenfabrik Year of Manufacture: 1988/1989 Design: Horizontal Nozzles: 2 Flow Rate (Q): 2.1 m³/s Net Head (H Net): 209.5 m Power Output (P): 3750 kW Speed: 429 min⁻¹ Operating Hours: 285,000 by end of November 2024 Pelton Wheel: PN25 DN 700 The turbine is sold completely with bearing and control hydraulics, as well as turbine governor, controller, Pelton wheel, and housings, along with supply pipes. Spare runner (11,000 operating hours) is available. Optionally, the generator, including the turbine bearings from AvK, can also be taken over: 10.2 kV, air-cooled. Find more here - / Contact us at -

CNC Lathe REALMECA type T400 Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T