battenfeld ba t used for sale

Machine in perfect condition, immediately ready for use, overhauled 2018/19, Operating h: approx. 6,000 Beckhoff control system Head 160 Single with Viewing Strip and PWDS Video on request

Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm

This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Cyclus Battenfeld, operating unit from injection molding machine BA-T2400 / BA 600 CDC / A5002 03 1 04 -Type: MDE-BDE -Number: 3x control unit available -Price: per piece -Dimensions: 290/50/190 mm -Weight: 0.8 kg/pc.

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld injection molding machine -Type: PT-350/2.3/M/ FL 83 -Motor: ABB 11 kW / 1455 rpm -Individual components: see photos -Dimensions: 980/610/H490 mm -Weight: 184 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Cyclus Battenfeld, module from injection molding machine -Type: Cyclus PGA-A MDE-PGA -Quantity: 3x module available -Price per piece -Dimensions: 250/120 / H55 mm -Weight: 0.5 kg / pc.

CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board -Manufacturer: Bosch, module from injection molding machine Battenfeld -Valve module: Bosch QV 60 0 811 405 099 -Dimensions: 220/45/H128 mm -Weight: 0.4 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card -Manufacturer: Bachmann, analog distribution card from injection molding machine Battenfeld -Type: CVA500 CV-A500 B2532 / 00 -Number: 4x control card available -Price per piece -Dimensions: 160/100 / H40 mm -Weight: 0.2kg/pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution print card -Manufacturer: Bachmann, distribution board from injection molding machine Battenfeld -Type: CV 32 B 2531/00 -Quantity: 10x module available -Price per piece -Dimensions: 100/80 / H30 mm -Weight: 0.1 kg/pc.

CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, analog distribution board, distribution printed circuit board -Manufacturer: Bachmann, distributor print card made from injection molding machine Battenfeld -Type: CV 4 B 2528/00 -Number: 3 modules available -Price: per piece -Dimensions: 100/60/H30 mm -Weight: 0.1 kg/pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, valve control -Manufacturer: Bachmann, valve amplifier from Battenfeld injection molding machine -Type: CPPV 200 KB 2525/00 -Quantity: 3x valve control available -Price per piece -Dimensions: 125/82/H35 mm -Weight: 0.4 kg/pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Card slot: Bachmann CST 500 (K1) / DNT B 2636/04 -Busprint: Bachmann BUS 500/1 B 6661/00 -Power supply: Bachmann DNT 90 / UB 6811/00 -Output card: Bachmann CA 16 / P 2.5 SB 6147/00 2 pcs. -Input card: Bachmann CE 32 / 1S B 6144/00 -Processor card: Bachmann CC 11/4 B 6047/00 -Coupling card: Bachmann KOP 500 U / SB 6786/00 -Control card: Bachmann MF 600/1 B 3736/01 -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -An ...

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, distribution board from injection molding machine Battenfeld -Type: Bachmann CV 16 P7,5 Art.Nr: 2530/00 -Quantity: 5x cards available -Price per piece -Dimensions .: 145/80 / H40 mm -Weight: 0.1 kg / pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distribution board, valve amplifier, electronic module -Manufacturer: Bachmann gb, electronics module from injection molding machine Battenfeld -Type: ROB 01 Art.Nr: 2644/00 -Dimensions: 135/80 / H35 mm -Weight: 0.1 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier -Manufacturer: Bachmann, electronic module valve amplifier from Battenfeld injection molding machine -Type: CPPV 200 SB 7621/00 -Quantity: 1x module available -Price per piece -Dimensions: 125/85/H30 mm -Weight: 0.2 kg/pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Input card: Bachmann CE 32/1 B 2600/01 4 pcs -Output card: Bachmann CA 16 / P 2.5 B 2596/00 5 pcs -Processor card: Bachmann CC 11/3 2 pcs. -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 B 4018/00 -Processor card: Bachmann STU 500 UB 2623/00 -Processor card: Bachmann STU 500 UB 4749/00 -Control card: Bachmann MF 600/1 KOP 500 U and KOP 500 ZB 2563/01 -Power supply: Bachmann SNT 411/2 -Card Rack: Bachmann BUS 618/1 BALS500 B 2568/00 -Analog  ...

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from Battenfeld injection molding machine -Type: MOD13/1X052-088 -Contr: TDM 3.2-30-300-W1 -Quantity: 2x servo controllers available -Price per piece -Dimension: 450/70/H325 mm -Weight: 8.6 kg/pc.

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from Battenfeld injection molding machine -Power supply: Bachmann SNT 411/2 -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 -Processor card: Bachmann STU 500 U -Electronic card: INC 500 B2562/00 -Analog card: Bachmann AIO 500 B 2585/00 -Processor card: UTU B 2933/00 -Temperature control card: Bachmann UTR 300 -Control card: Bachmann MF 600/1 B 3736/01 -Coupling card: Bachmann KOP 500 UB 2563/00 -Processor card: Bachmann CC 11/3 B 35227/00 -Output card: Bachmann CA 16/P 2.5 SB 2596/00 -Input card: Bac ...

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100/SB 7827/00 -Quantity: 3x Modul card available -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.1 kg/pc.

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/pc.

Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, temperature control card, amplifier card -Electronic module: from Battenfeld injection molding machine -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 115/80/H50 mm -Weight: 0.2 kg

Control card, plug-in cards, printed circuit boards, circuit board, coupling card, temperature control card -Manufacturer: Bachmann, temperature control card electronic module from Battenfeld injection molding machine -Type: RTR 04 Art.No.: 3020/00 -Quantity: 2x module available -Price per piece -Dimension: 130/25/H90 mm -Weight: 0.2 kg/pc.

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

Clamping force: 450t, opening stroke: 950mm, tie bar spacing X/Y: 800mm/970mm, operating pressure: 210bar, weight: approx. 20400kg, control system: Unilog B4. An on-site inspection is possible.

Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible.

Ref. no.: 18625 Manufacturer: WITTMANN BATTENFELD Year of construction: 2011 Clamping unit Clamping force: 110 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 450 mm Platen size (h x v): 680 x 663 mm Injection unit Screw diameter: 30 mm Injection volume: 88 cm³ Shot weight: 80 g Injection pressure: 1471 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 4600 kg Further information: Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance. All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.  ...

Key data: 3000 kN

Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our servic ...

Key data: 2700 kN

Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm I ...

Key data: 3000 kN

Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit: Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot: 3 ...

Key data: 1500 kN

Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines are started by our servi ...

Key data: 1500 kN

Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...

Key data: 1300 kN

Battenfeld BA 1300V/315 V-R / Vertical Injection Molding Machine with the Rotary Table Year of Make: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Spray pressure: 1575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Handlebar spacing: 454x740 mm Size of the clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air Valve x 5 Hydraulic core pull x 1 Rotary table: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...

Key data: 1000 kN

Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...

Key data: 1100 kN

Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m  ...

Key data: 1100 kN

Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control:UNILOG B8 - Touch Screen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was servi ...

Key data: 1000 kN

Battenfeld HM 100/525 with the Battenfeld R10S robot / Operating hours: approx. 19,000 in automatic mode Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total number of operating hours: 26,580 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Battenfeld R10S robot Year of Make: 2015 5-axis robot: 3 axes are driven by servo motors (electric); Axis B - pneumatic, Axis C Robot with adapter Purchase of the r ...

Key data: 2000 kN

Battenfeld VERTICAL V - 200T Clamping Force: 200T Machine Brand: Battenfeld Type: Single Material Unit: V 1000 Rotating System: Yes Number of Stations: 4 Distance Between Columns: 575 mm Table Diameter: 1520 mm Table Height: 700 mm Mold Thickness (Min/Max): 300 x 600 mm Opening Stroke: 300 mm Molding Screw Diameter: 50 mm Molding Injection Volume: 491 L/1000 km Number of Pneumatic Cores: 1 Number of Hydraulic Cores: 4 Rotating Tables: Yes Harting Injection Ports (Spins): 24 Harting Ejection Ports (Spins): 16 Molding Washer Diameter: 160 mm

B&A REF: 9170 TON: 50 SCREW DIAMETER: 14MM SHOT WEIGHT: 1 STROKE VOLUME: 1.1CM3 INJECTION PRESSURE: 2500AR PLATEN SIZES: 364 X 196MM MIN MOULD HEIGHT: 100MM MOULD OPENING STROKE: 200MM MAX DAYLIGHT: 300MM EJECTOR STROKE: 50MM CONTROLS: UNILOG B4

Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.

A complete Battenfeld compact extrusion line for the production of PVC profiles is available. 1) Twin-screw extruder Battenfeld MBEX 2-50-16 V, year of manufacture: 2006, output capacity: 15kg-60kg/h, screw diameter: 52mm, screw length: 16×D, barrel zones: 4, barrel cooling zones: 3, adapter zones: 1, die heating zones: 9, control system: BMCtouch. Including dry vacuum pump, pressure measuring points, clamping flange, water-air separator, blow-off device, mounting elements and hopper cover. 2) Calibration table Battenfeld KP 125 V 2/4m, mounting frame length: 4100mm, mounting rail width: 320mm, longitudinal adjustment: 500mm, transverse adjustment: +/-15mm. 3) Speck vacuum system, pumps: 2, motor power: 2×4kW, operating pressure: 200mbar, max. air capacity: 2×140m³/h. 4) Battenfeld RP 125 SE caterpillar haul-off, passage height: 100mm, contact length: 1100mm, pad width: 160mm, haul-o ...

Injection moulding machine Battenfeld BK T 2500 BJ 1991

A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible.

Battenfeld Microsystem 50 Injection Moulding Machine 100 % working with no hidden defects

B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE

A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible.

Key data: 900 kN, 30 mm

Stock No.: 503672 Manufacturer: Battenfeld Type: HM 90-210 Control: UNILOG B6 Year of Make: 2013 Hours: 30533 h Clamping force: 900 kN Tie bar h x v: 420 x 370 mm Panel size h x v: 580 x 630 mm Min. installation height: 450 mm Plate spacing max.: 925 mm Opening travel: 475 mm Screw diameter: 30 mm Displacement: 106 cc Spray pressure: 2042 bar Machine dimensions LxWxH: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text German CEE socket 16A CEE socket 32A Core pull hydraulic 2x Air valve 1x Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Worm drive with three-phase servo motor Ethernet interface Interface EUROMAP 13 EUROMAP 67 Handling Interface Interface for coloring device Interface for temperature control unit Schuko socket 10A Tool heater 8x

Key data: 900 kN, 30 mm

Stock No.: 503670 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control: UNILOG B6 Year of Make: 2010 Clamping force: 900 kN Tie bar h x v: 420 x 370 mm Panel size h x v: 630 x 613 mm Min. installation height: 450 mm Max. installation height: 925 mm Plate spacing max.: 925 mm Opening travel: 475 mm Screw diameter: 30 mm Displacement: 106 cc Spray pressure: 2042 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 2x Air valve 1x Machine with water battery Machine without material hopper Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Worm drive with three-phase servo motor Ethernet interface Interface EUROMAP 13 EUROMAP 67 Handling Interface Interface for coloring device Interface for temperature control unit Interface USB Schuko socket 10A Tool heater 6x Machine dimensions LxWxH: 4.35m x 1.5m  ...