battenfeld ba t used for sale

complete stainless steel suitable for thermo-oil heating (= 115 kW) Band length 3,000 mm Track width 400 mm Mesh width ± 10 mm Oil pump Level control Insertion tape Executable mechanical lifting device infinitely variable speed Dirt transport suitable for fire protection %, p/o (L x W x H) : ± 5,200 x 1,700 x 3,100 mm

DATA ON THE MACHINE Machine type: Roller curve conveyor / 90 degrees Manufacturer: Transnorm Model: 816-500 Built: 2007 Condition: very good (used) Price 1,200 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221 Description We offer you a used roller conveyor from the manufacturer Transnorm, incl. feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

DATA ON THE MACHINE Machine type: Roller conveyor / roller conveyor Manufacturer: Transnorm Model: 2900 Built: 2007 Condition: very good (used) Price 950 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221-1 Description We offer you a used roller conveyor from the manufacturer Transnorm, excluding feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

; Gross weight [kg]: 2960; Registration Number: 2; Engine: Deutz TCD4.1L4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100

Used three extruders with die - head/three layer extruder from POLY TECH model HP 1800/3/100/55/55. New: 2000. 1) Head/Matrix - Slot of the die - 2,26 - Die diameter - 220 mm - Thickness 25-130 microns - Capacity 250-300 kg / hour 2) Matrix/Head - With efficient heating system (set of heaters with sensors PT/100 temperature sensors) - Three described Poly Tech extruders A) Extruder fi 100 mm L/D 30 with 150 kW motor drive . ZAMBELLO/ITALY drive gearbox TYPE RPU 280 E RPM 1400 B) Extruders fi 55 mm L/D 30 with 60 kW motor drive pcs. 2 ZAMBELLO/ITALY gearboxes TYPE RPU 180 E RPM 1400 The described extruders have a gravimetric system from DOTECO/ITALY Model GRADO IIS/GO 4100940 equipped with a metering system with computer readout on the measuring cabinet. Complete plasticizing systems including drive gears and main driv ...

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm : 480 mm : 550 mm : 1524x380 mm : SK 40 : 127 mm : 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pull-off machine for up to 60cm deep ovens Bakery 90x38cm We have several of these pullers in stock. New as well as used. Dimensions: 38cm Wide 90cm Long

: 50 mm : 1275 mm : 1330 - : MK 5 bore depth: 270 mm spindle turning speed range: 44-1206 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TEM SYSTME SCREEN RS - 12404588

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

TOUCH SCREEN RS - 12473955

The scope of delivery includes: 01x Stand protection, used Manufacturer: Meta (Thyssen) Material colour: orange Total height: approx. 1,255 mm Total width: approx. 105 mm Inner width: approx. 86 mm Suitable for frame profile: 85 mm Material thickness: approx. 4.0 mm Total depth: approx. 60 mm Height deflector: approx. 50 mm Leg size: approx. 75 x 75 mm Original clasp tabs Weight | Pcs.: 12,51 kg. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

TELSTAR LYOPHILIZER, MODEL LYONOMIC 13 ST Year of construction: 2019 For clinical trials, pilot, and small or large scale industrial drying processes. Designed and engineered modularly to create a range of standard models and in-factory options. butterfly valve to isolate the condenser and chamber cylindrical or rectangular chamber, manufactured in AISI 316 L stainless steel horizontal or vertical cylindrical condenser manufactured in AISI 316L stainless steel door in AISI 316L, with a sight-glass in the centre to observe the product during the cycle PRODUCTION CHARACTERISTICS Designed for freeze drying products like Vaccines Biologicals Antibiotics Active ingredients Reactives ELECTRICAL CHARACTERISTICS Voltage: 230 Volts Frequency: 50 Hertz Phases: 3 Current: 13 KW DIMENSIONS Weight: 5,500 kgs (c ...

PR9000 pallet rack for 42 Euro pallets This pallet rack has been tested with a maximum load of 2,200 kg per truss level in accordance with DIN EN 15512 and thus has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned in parallel Made of solid, high-quality steel for extreme robustness. Easily withstands high loads of up to 9,000 kg per field High-quality workmanship of the entire pallet rack Plenty of storage space, thanks to the 2 levels and the 4 fields Eye-catching blue and orange colour scheme for maximum safety Stand profile: Height: 5000 mm Material: Steel S-355 JR Dimensions:80 W x 70 D x 1.5 Perforation: 50 mm (grid – offset) Surface: Powder-coated blue Profile construction: Omega profile shape Depth: 1100 mm Manufacturing: Col ...

PR9000 pallet rack for 42 Euro pallets This pallet rack has been tested with a maximum load of 2,200 kg per truss level in accordance with DIN EN 15512 and thus has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned in parallel Made of solid, high-quality steel for extreme robustness. Easily withstands high loads of up to 9,000 kg per field High-quality workmanship of the entire pallet rack Plenty of storage space, thanks to the 2 levels and the 4 fields Eye-catching blue and orange colour scheme for maximum safety Stand profile: Height: 5500 mm Material: Steel S-355 JR Dimensions:80 W x 70 D x 1.5 Perforation: 50 mm (grid – offset) Surface: Powder-coated blue Profile construction: Omega profile shape Depth: 1100 mm Manufacturing: Col ...

Pallet rack PR9000 for 48 Euro pallets This pallet rack has been tested with a maximum load of 2,200 kg per truss level in accordance with DIN EN 15512 and thus has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned in parallel Made of solid, high-quality steel for extreme robustness. Easily withstands high loads of up to 9,000 kg per field High-quality workmanship of the entire pallet rack Plenty of storage space, thanks to the 3 levels and the 3 fields Eye-catching blue and orange colour scheme for maximum safety Stand profile: Height: 5500 mm Material: Steel S-355 JR Dimensions:80 W x 70 D x 1.5 Perforation: 50 mm (grid – offset) Surface: Powder-coated blue Profile construction: Omega profile shape Depth: 1100 mm Manufacturing: Cold  ...

Battery-powered high-performance sweeper/scrubber dryer Scrub and sweep in one go: with the M17 battery-powered ride-on scouring vacuum cleaner from Tennant® Scrubbing and sweeping in one pass – and chemical-free: thanks to ec-H2O™ technology in the battery-powered Tennant® M17 ride-on scouring vacuum cleaner with scrubbing and sweeping function. Highly efficient floor cleaning is ensured by double side sweeping brushes and automated high emptying, among other things. Chemical-free ec-H2O™ technology for environmental, health and cost awareness High indoor air quality thanks to 2-stage filter system with ShakeMax filter shaker Easy maintenance with tool-free access to suction feet, brushes and filters Double side sweeping brushes for longer cleaning path and protection of the suction cup Intuitive operation via touch-n-go™ controls Automated high emptying for debris  ...

Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Give. Angular handpiece with collet for key tension, wear-resistant cast housing, ball bearing, bevel gear, grease lubricated. Equipped with 6mm collet

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Techne HB-1D Hybridiser Hybridization Oven/Incubator This economical high-performance hybridization furnace is compact and easy to use. It's for the immobilization of DNA, RNA and proteins on Nylon or nitrocellulose membranes. The incubator holds up to six hybridization tubes with at least five 20x20 cm membranes/tubes. A clear liquid crystal temperature display and glass door allow for accurate data observation. The warm-up time is 50 minutes (from 16 to 65 °C) with over-temperature shutdown. The device has a digital temperature control and a PRT temperature sensor. • Compact, easy to use and offers complete protection against hybridization hazards • A temperature range of 10 °C above ambient to 100 °C • High capacity that can hold up to 24 mini tubes or 6 unique large tubes • Hybridizations can be performed with a minimum volume of 5 ml probe • Adjust ...

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Diesel Fuel Tank 2000 Liter, 2.000 Liter Tank, Western Global 20TCC; Gross weight [kg]: 698; Accessories: 2x in stock

Offer via gebr. Suhner straight grinder type USC 9-R You can easily use the SUHNER USC 9-R straight grinder on high or low speed. It is suitable for almost all applications with infinitely variable speed control. The fields of application include fine milling and grinding work. Specifics Work in the high and low touring area Continuous speed regulation 4000 - 9000 rpm. 500 watts Electrical soft start

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

; Power [PS]: 897; Gross weight [kg]: 5650; Engine: TWD1744GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 940

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.

For sale: Tuchenhagen Mixproof Valve 4'' Manifold GEA Order number: 7100.14 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

Schneider NGEA-2410 T40/E

Working size 4000x2000 mm

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°

We offer a refurbished Peri Trio 270 formwork 198.28m² complete with accessories as follows. Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality. New value approx. 145766,50€ Special net price 64706,00€ approx. 56% discount Pcs. Description 16 Element TR 270 x 240 new frames, new formlining 8 Element TR 270 x 120 new formlining 8 Element TR 270 x 90 new formlining 4 Element TR 270 x 72 top used formlining 4 multi-purpose elements TRM 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 2 stripping elements TR 270x 24 new formwork lining 6 Corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 TAR 85 compensating bolts 16 Scaffolding bracket TRG 80 2 Moving hooks MAXIMO 1.5 t new 1 new MX trans ...

Type Smokehouses Height 2150 Width 1400 mm Length 1150 mm Voltage Electrical: 400V 50Hz 3N Installed Power 13 kw Main material Stainlees Steel Smokegenerator type Detached, woodchips Trolleys per batch 1 pc Standard Trolley (1000 x 1000 x 2000 mm) No Non-standard trolley dimentions 1050 x 900 x 1500 Smokehouse functions: Drying and smoking Smokehouse functions Smoking only Smokehouse function Brewing Smokehouse function Ventilation

Transfo 40 kVA

2 times in stock

Used lab centrifuge SL 40 THERMO SCIENIFIC. New 2017, available 2 pcs.

: 585/600 mm : 465/480 mm : 385/400 mm : 900x500 mm : 1200x250 mm : 40-2000 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These systems are mainly used for processing sausage meat using stuffing machines. But other high-viscosity products from the food industry, such as marzipan, can also be tested with these devices for very fine metallic residues. The high-strength product tubes can withstand pressures of up to 55 bar. RD80/HP screw fittings are used for connection. The whole unit is height adjustable and movable, so it can be connected to all standard chargers. Optionally, the units are available with a connecting gear for direct connection to the calibrator. Suitable ejector valves are available for emptying the metal! Special features Compatible with all standard filling devices Optional ejector and/or connecting gear Protection class IP69K for all components All components in hygienic design Height adjustable via maintenance-free spindle drive M-Pulse2 controller 4 quadra ...

Multivac M860F MC Thermoforming Packaging Machine High-performance thermoforming packaging machine designed for vacuum and modified atmosphere packaging (MAP) applications. The Multivac M860F MC offers reliable operation, flexible format handling, and hygienic stainless steel construction, making it suitable for industrial food packaging environments. General Information - Manufacturer: Multivac - Model: M860F MC - Year of Manufacture: 1995 - Operating Hours: approx. 30,000 - Ownership: Single owner - Origin: Switzerland - Current Location: Sharjah, UAE - Production Status: Ready for immediate installation and production - Condition: Excellent used condition - Vacuum Pump: Not included in the scope of supply Machine Dimensions - Length: 670 cm - Width: 96 cm - Height: 190 cm Film Specifications - Film Width: 420 mm Packaging Formats Forming Dimensions - 250 ...