We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,566 used machines on RESALE, but how to find them? Machine Search
used
Univ. Swivel-tilt-rotary table similar to lid, Maho milling machine table Attachment table for Univ. Tool barrel machine Table size 680 x 340 mm Groove width 14 mm Slot spacing 45 mm Rotatable 360 (1 revolution on the handwheel = 4 on the table )Nonius 240 tick marks in minutes Tiltable +/- 30 (drive via square with threaded spindle) Swivel 30 (drive via square with threaded spindle) - 7x T-slot 14 mm- Mounting plate 320 x 220 mm Dimensions L x W x H 780 x 470 x 320 mm Weight approx. 180 kg good condition; used
used
Shell Tellus S3 M 46 200L Barrel originally sealed
used
Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...
used
material width: 2000 mm material thickness: 10,00 mm no. of straightening rolls: 13 sheet thickness - min.: 3,00 mm diam. of the rolls ca.: 145 mm straightening feed: 16 m/min barrel length ca.: 2330 mm middle distance of straightening rolls: 150 mm back-up rolls ca.: 290 mm No. of supports up / down: 3/3 main drive motor: 30 kW total power requirement: kW weight of the machine ca.: 32 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
23 pieces, Polyethylene flat film, residual stock, Width 420 mm Thickness: 25 microns Barrel length per roll:1500 meters needled suitable for shrinking "There are more pallets available" No guarantee is assumed for the technical data given in the description.
used
13 pieces, Polyethylene flat film, residual stock, Width 420 mm Thickness: 25 microns Barrel length per roll:1500 meters needled suitable for shrinking "There are more pallets available" No guarantee is assumed for the technical data given in the description.
new
8 pieces, Polyethylene semi-tubular film, residual stock, Width 550 mm Thickness: 30 microns Barrel length per roll:700 meters needled suitable for shrinking No guarantee is assumed for the technical data given in the description.
used
Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK
used
Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal. ...
used
Key data: 900 , 252 , 48
Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault ...
used
composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...
used
material width: 1650 mm material thickness: 2,00 mm no. of straightening rolls: 23 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 53,60 mm straight. rolls-needle bearings: ja / yes between stands ca.: 1750 mm barrel length ca.: 1820 mm straight. speed ca.: m/ min total power requirement: 58 kW weight of the machine ca.: 19,60 t dimensions of the machine ca.: 6,00 x 3,00 x 2,90 m Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individually deliverable 1 set of straightening rollers (replacement rollers) diam. 53.68mm Central grease lubrication of the straightening rollers bearing rails Circulating oil lubrication of gears and card ...
used
Grinding spindle SFJ HJ860 n max: 60000 rpm diameter: Ø 80 mm sleeve length: 220 mm tool holder: Ø 9 mm, length: 15 mm female thread: M5 x 0.8, depth: 25 mm flat pulley: Ø 30 mm, width: 25 mm, barrel-shaped used, tested ! Dimensions: 300 x 80 x 80 mm
new
AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a ...
used
Grinding spindle CZ IBC 80 250 T n max: 16000 rpm diameter: Ø 80 mm sleeve length: 222 mm tool holder: Ø 10 mm, length: 10 mm female thread: M5 x 0.8, depth: 25 mm tool holder (screw-on): Ø 10 mm, length: 15 mm female thread: M6 x 1.0, depth: 20 mm flat pulley: Ø 40 mm, width: 60 mm, barrel-shaped used, tested ! Dimensions: 383 x 80 x 80 mm
used
Flat belt wheel, flat pulley PAGUS Ø 178 x 95 mm diameter: Ø 178 mm flat belt width: 90 tread: barrel-shaped 2x deep groove ball bearings: SKF 62208-2RS1 hollow shaft: inner diameter: Ø 30 mm, outer diameter: Ø 40 mm, length: 106 mm used, checked! Dimensions ( packaging ): 180 x 180 x 100 mm
used
Tension spring, barrel-shaped, 10 pieces PAGUS Ø 68 x 295 mm Wire diameter: 8 mm Coiling diameter ( outer ): Ø 68 mm Length of the unloaded spring ( inner edge of the eyelet to the inner edge of the eyelet): 278 mm Length of the unloaded spring body: 153 mm Eyelet position: 180° Material: spring steel, surface treated New ! Dimensions ( single tension spring ): 295 x 68 x 68 mm
used
Grinding spindle DKF 5.4-5/2 TGL 4870 ( TGL4870 ) n max: 15000 rpm diameter: Ø 40 mm sleeve length: 310 mm with tool holder: Ø 25 mm, width: max. 20 mm drive: flat belt wheel: Ø 40 mm, Length: 40 mm (barrel-shaped) used, tested ! Dimensions: 400 x 40 x 40 mm
used
Grinding spindle DKF 5.6-5/4 TGL 4870 ( TGL4870 ) n max: 9000 rpm diameter: Ø 60 mm sleeve length: 310 mm with tool holder: Ø 30 mm, width: max. 25 mm drive: flat belt wheel: Ø 56 mm, Length: 63 mm ( barrel-shaped ) used, tested ! Dimensions: 430 x 60 x 60 mm
used
TECNOVA MONO SCREW EXTRUDER 130 mm 54 L/D double degassing system For LDPE HDPE PP PC PS ABS, Average output 400/600 kg/h depending on material and feeding rate, Total installed power 530 kw, – about 318 kw used in work Construction year 2015 Screw diam. 130 mm 54 L/D Bi-metallic barrel A.c. motor 200 Kw + inverter Double degassing system (degassing points about 2 mt.apart for excellent results) non-stop screen changer with diam.300 mm screens AVAILABLE FITTED WITH FULLY AUTOMATIC SCREEN-CHANGER NEW or USED Hydraulic pack Vented electric cabinets Water ring pelletizer Stainless steel centrifugal drier Vent The line is offered TOTALLY RECONDITIONED Find out on our how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of vibro classifier, bag filling/weighing station, upstream equipment, Availble on request: scrap silo + auger + crammed feeder, [h ...
used
Machine: Foil shrink tunnel of lime barrel for product packaging Product no.: 5201 Manufacturer: Kallfass Type: Super Wrap 650 Year: 2010s Description: Used film shrink tunnel / film packaging machine from the manufacturer Kallfasss in very good condition. 4 are available. Please inquire directly here: Paptec Reuter Industrieservice GmbH Hermann - Metzger - Strasse 1/2 88045 Friedrichshafen Germany Phone: +49 (0) 7541 592768 +49 (0) 7541 978868 10 - 14 Whatsapp: +49 151 65188844 Fax: +49 (0) 7541 5927 69 E-mail: infopaptec.com
used
Specifications: - Pipe diameter up to approx. 800 mm - Distance between centers approx. 1500 mm - Tailstock can be moved with handwheel - infinitely variable rotation speed - Right and left – barrel - Drive 400 V - Space requirement approx. W 2400 x H 1250 x D 1000 mm - Weight approx. 150 kg
used
for PE PP PS PC ABS, Barrel with screw Ø 130 mm. 35 L/D, feeding hopper Vacuum degassing pump Non-stop hydraulic screen changer Water ring pelletizer Drying centrifuge Water tank and heat exchanging unit N.2 control cabinets Offered AS IS
used
average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...
used
LEDA EXTRUDER 160 mm 50 LD 2 degassing pumps, for PP PS PE ABS PC, etc., Very good quality for this extruder, 2 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with barrel 160 mm. screw, 50 L/D, Infra Red Heaters, 355 kw a.c.drive with inverter (about 60% power used in work), Double vacuum degassing system, Control cabinet, Nominal throughput rate 800-900 kg./h, The extruder is offered RECONDITIONED, and can be completed with FULLY AUTOMATIC SCREENCHANGER + PELLETIZER, L/D RATIO: 50:1
new
Spiral mixer Model No.: SM2-50T Kneading machine with sophisticated and robust technology! for the best kneading results! Digital easy touch control with rewind button Dough machine with 3 timers 1 mixing gear and 2 forward gears for min/max. 6 - 50 kg dough Flour dust hood with damper Stainless steel boiler and spiral Boiler left and right barrel Machine mobile with 4 brakes DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Dimensions: 630 x 1010 x 1220/1600mm, WxDxH Demonstration machine with 24 months warranty More TOP bakery machines in stock!
used
Spiral Kneader Dough Machine Turri Model: ISFE 120 very robust technology! Mobile kneading machine with 2 brakes 2 LED timers, 2 gears, temperature display flour dust hood, Stainless Steel Boiler and Spiral for max. 120 kg of dough, Boiler left/right barrel Connection: 400V, 13.5 Amp., 32A-CEE plug Dimensions: 790 x 1300 x 1300 mm, WxDxH Used machine overhauled with 6 months warranty More TOP bakery machines in stock!
used
Fixed point, fixed center point, fixed Morse taper, fixed centering point -barrel tip: shaft-mounted -Recording: see pictures -Weight: 1 kg
used
approx. 100 pieces plastic bin / barrel, rollable – used- : Price per piece ex site: 20.-€ (net)! Manufacturer: Suroy Type: unknown Year of manufacture: unknown Internal dimensions: 80 x 40 cm Without lid With 3 castors 2 Grip Holes Condition: good Available: now Location: Wenkbach
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Bearing type: spherical roller bearing -Bore: Ø 160 mm -Outer diameter: 340 mm -Width: 114mm -NO SALE BY WEIGHT
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Outer diameter: 310 mm -Width: 82 mm -Interior diameter: 200 mm -Weight 22.4 kg
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Outer diameter: 210 mm -Width: 53 mm -Inside diameter: 140 mm -Weight 6.3 kg
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Bearing type spherical roller bearing -Bore: 65 mm -conical bore -Outer diameter: 120 mm -Width: 31 mm
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Outer diameter: 240 mm -Width: 80 mm -Inside diameter: 110 mm -Weight 17 kg
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Execution: cc/w33 -d = inside: 220 -D = outside: 340 -B = width: 90 -Weight: 30 kg
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Version: CC/ W33 -d = inside: 200 -D = outside: 310 -B = width: 82 -NO SALE BY WEIGHT/REMAINING ITEM
used
Rail wheel, flanged wheel, track roller, track wheel, wagon wheel, track roller -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange 196/200 mm, see photos -barrel width: mm -Axle Ø: approx. 17 mm -Number: 1x wheel available -Price per piece -Total dimensions: Ø238 x 100 mm -Weight: 8.0 kg/pc.
used
Rail wheel, flanged wheel, track roller, track wheel, wagon wheel, track roller -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange 193/197 mm, see photos -barrel width: mm -Axle Ø: approx. 17 mm -Number: 2x wheel available -Price per piece -Total dimensions: Ø237 x 100 mm -Weight: 7.0 kg/pc.
used
Rail wheel, flanged wheel, roller, track wheel, wagon wheel -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange approx. 200 mm, see photo -Barrel width: 40 mm -Axle Ø: 20 mm -Number: 3x wheel available -Price per piece -Total dimensions: Ø230 x 145 mm (with axle bolt) -Weight: 5.6 kg/pc.
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings, spherical roller bearings, spherical roller bearings, cylindrical roller bearings -Spherical roller bearing: roller bearing with lubricating groove -Type. 22322 -Bore: Ø 110 mm -Outer diameter: 240 mm -Width: 80mm -Weight: 17 kg
used
Roller bearings, ball bearings, barrel bearings, bearings, roller bearings, thrust bearings, linear ball bearings -Linear ball bearings -Inside diameter: 30 mm -Outer diameter: 47 mm -Length: 68 mm -Price: per piece -Number: 117 pieces -Weight: 0.3 kg/piece
used
moving point, moving center point, moving Morse taper, moving -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/220 mm -Weight: 2.8 kg
used
moving point, moving center point, moving Morse taper, moving -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 70/240 mm -Weight: 3 kg
used
live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.
used
moving point, moving center point, moving Morse taper, moving -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/242 mm -Weight: 3.9 kg
used
Drum lifter, drum handling, drum gripper, drum lifter, drum handling, drum gripper -Barrel lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200 L steel bungee barrels, steel lidded barrels, roll-ring barrels -Take: 410 mm -Automatic opening when: depositing the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Own weight: 47 kg
used
moving point, moving center point, moving Morse taper, moving -Center point: 30-89 mm -barrel tip: shaft-mounted -Recording: MK5 -Weight: 5.4 kg
used
moving point, moving center point, moving Morse taper, moving -Center point: 50-85 mm -barrel tip: shaft-mounted -Recording: MK5 -Weight: 5.4 kg
used
moving point, moving center point, moving Morse taper, moving -Center point: 40 mm -barrel tip: shaft-mounted -Recording: MK5 -Number: 2x tips available -Price: per piece -Weight: 4.7 kg
used
moving point, moving center point, moving Morse taper, moving -Center point: 60 mm -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x tips available -Price: per piece -Weight: 16 kg