Manufacturer: Arburg
Type: 221 KS 250-75
Control: Selogica
Building year: 1999
Operating hours:approx. 60,000 h
Extras:
-high wear resistant screw
clamping unit
Clamping force: 250 kN
Bar distance: ...
used machine
Manufacturer: Arburg
Type: 221 KS 250-75
Control: Selogica
Building year: 1999
Operating hours:approx. 60,000 h
Extras:
-high wear resistant screw
clamping unit
Clamping force: 250 kN
Bar distance: 221 mm
Platen size hxv: 342 x 250 mm
tool height min: 150 mm -300
Platen distance: 350-500 mm
Opening stroke: 200 mm max
Ejector stroke: 60 mm
Ejector force: 20 kN max
injection unit
Screw diameter 25 mm
Stroke volume: 49 ccm
Shot weight: 41 gr.
injection pressure: 1500 bar
Screw length: 20 l/d
Screw stroke 100 mm
Number of heating zones: 4
Nozzle contact force: 50 kN
Nozzle lift-off movement: 180 mm
Dimensions - Weight
Total weight: 1040 KG
electrical fuse: 25 A
-available now at our warehouse Hannover
-free loaded on the buyer's truck or free domicile against freight refund
-the machine is offered function-tested
-the offered machine is our sole property
stations: number of slitts: length: mm --------------------------------------------------: ELECTRICAL SPECIFICATIONS: - mains voltage: 380 V - mains frequency: 50 Hz The equipment includes: autorotor table TR35 - 03 - 270° table reductor MVR 7 FL1 TABLE MOTOR AUTOF. KW 0.75 N° ROLLS OF THE TABLE N° 6 DIAM 30 MM CLUTCH SETTING 12 SAFETY FENCE ARGOLUX TABLE DIAMETER 840 MM TABLE DECELERATOR 0EM10MB CONTACT WHEEL DIAMETER 250 MM DRAWING ROLL DIAMETER 300 MM IDLE ROLLS DIAMETER 180 MM STRIP TENSIONER MOTOR KW 2.2 MANDREL TYPE MOTOR DCM3C MANDREL DRIVE DCD 60 MANDREL ENCODER DIAMETER 15 MM POSITIONER GROUP CYLINDER STROKE 10 MM COLUMN MOVEMENT MOTOR KW 0.75 LINE AIR PRESSURE 6 BAR
This ad was created with MODUL MWS - the software solution of LogoTech.
Manufacturer: Battenfeld
Type of machine: TM 100 / 525
Year: 2006
Controlversion: B 4
Screen text: German
Operating Hours 26.400 h
Extras
...
used machine
Manufacturer: Battenfeld
Type of machine: TM 100 / 525
Year: 2006
Controlversion: B 4
Screen text: German
Operating Hours 26.400 h
Extras
-robot interface
-new screw change in 2017
Technical details
Clamping unit
Clamping force: 1.100 kN
Size of mould platens (h x v): 640 x 663 mm
Distance tie bars (h x v): 420 x 420 mm
Mould opening stroke: 680 mm (max)
Mould height min.: 200 mm
Mould height max.: 450 mm
Max daylight: 830 mm
Hydraulic ejector - stroke: 140 mm
Ejector force forward/backward: 26,4 kN
Injection unit
Screw diameter: 40 mm
Ls/D ratio: 22
Injection pressure: 2100 bar
Stroke volume: 251 ccm
Shot weight, PS: 228,4 g
Nozzle pressure: 86 kN
Electric and Hydraulic Equipment
Adjustable barrel heating zones: 1+3
Pump power 15 Kw
Oil 250 L
Dimensions und weights
Total machine weight: 4.400 kg
Dimensions ( L x B x H ) 4,3 x 1,5 x 2,1 m
Available at our storage in Hannover)
free loaded on truck of the buyer or free delivery against freight reimbursement
Construction year: 2013
Voltage: 400 V
Frequency: 50 Hz
Power supply: 13 kVA
Electrical requirement: IEC
Compressed air connection: 7-14 bar
Tragfährigkeit per pallet: 3,000 kg
Sheet format: 3.000 x 1.500 mm
Dim ...
used machine
Construction year: 2013
Voltage: 400 V
Frequency: 50 Hz
Power supply: 13 kVA
Electrical requirement: IEC
Compressed air connection: 7-14 bar
Tragfährigkeit per pallet: 3,000 kg
Sheet format: 3.000 x 1.500 mm
Dimensions: approx. 7.022 x 6.181 mm system height: approx. 4.970 mm
Total storage compartments: 29 seats
Storage compartments 90 mm = 21
Storage compartments 170 mm = 8
turning diameter: 390 mmturning length: 1400 mmcontrol: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of c-axes: 1 - number of y-axes: 1 - ...
used machine
turning diameter: 390 mm turning length: 1400 mm control: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of c-axes: 1 - number of y-axes: 1 - number of b-axes: 1 WORKING RANGE TURNING: - swing diameter (max): 610 mm - turning diameter (max): 390 mm - bar diameter (max): 65 mm - worpiece length (max): 1400 mm MAIN SPINDLE: - spindle revolutions (min): 20 /min - spindle revolutions (max): 4000 /min - c-axis: yes: X/Z SLIDE: - number of tool positions (total): 40 - - rotation speeds (max): 12000 /min DIMENSIONS / WEIGHTS: - space requirements -left/right-: 8700 mm - space requirements -front/back-: 4500 mm - total height: 2800 mm - total weight approx.: 18500 kg ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: - coolant through turret: yes: - through spindle coolant attachment: yes: - European CE standards: yes:
This ad was created with MODUL MWS - the software solution of LogoTech.
The injection molding machine ENGEL VICTORY 650/130 TECH was built in 2004. The machine is designed for the processing of thermoplastics and silicone - a separate aggregate for each type of material. In addition, the fix ...
used machine
The injection molding machine ENGEL VICTORY 650/130 TECH was built in 2004. The machine is designed for the processing of thermoplastics and silicone - a separate aggregate for each type of material. In addition, the fixed and movable plate is cooled with water.
Technical data :
- number of hours worked: 70822
- maximum clamping force of tables: 1300 kN
- injection weight: max. 290 g/PS
- injection pressure: max. 2048 bar
- tool height: min. 300 mm
- opening the tool: max. 600 mm
- distance of tool boards: max. 900 mm
- ejector stroke: max. 150 mm
- centering ring: 160 mm
- screw diameter: 45 mm
- weight: 9500 kg
ENGEL VICTORY 650/130 TECH injection molding machine equipment:
- Polish language
- hot water regulator
- number of zones of the regulator: 11
- sorting unit
- air valves
- number of air valves: 4
turning diameter: 390 mmturning length: 1850 mmcontrol: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 1 - number of c-axes: 2 ...
used machine
turning diameter: 390 mm turning length: 1850 mm control: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 1 - number of c-axes: 2 - number of y-axes: 1 - number of b-axes: 1 WORKING RANGE TURNING: - swing diameter (max): 610 mm - turning diameter (max): 390 mm - worpiece length (max): 1850 mm MAIN SPINDLE: - spindle revolutions (min): 20 /min - spindle revolutions (max): 3200 /min - drive power: 69 kW - spindle torque: 1080 Nm - spindle bore diameter: 118 mm - c-axis: yes: COUNTER SPINDLE: - spindle revolutions (min): 20 /min - spindle revolutions (max): 3200 /min - c-axis: yes: X/Z SLIDE: - Y-axis travel: 210 mm - rotating range B-axis up to: 240 ° - rapid traverse Z: 46 mm/min - rapid traverse X: 60 mm/min - number of tool positions (total): 92 - - rotation speeds (max): 4000 /min - - drive power: 10 kW TOOL MAGAZINE: - magazin type: chain magazine: - number of positions: 80 ELECTRICAL SPECIFICATIONS: - total power consumption: 180 kW DIMENSIONS / WEIGHTS: - space requirements -left/right-: 8000 mm - space requirements -front/back-: 4000 mm - total height: 3200 mm - total weight approx.: 18500 kg ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: Equipment: -Main and counter spindle as integrated spindle motor -Differential pressure for main and counter spindles -separate speed limiting device for power chuck -Tool magazine 40x -Three-jaw power chuck with bore and quick-change jaw system FNC 250-72 Fabr. -Forkard, incl, attachments for main spindle -Recording for counter spindle -Spindle flange with MKS holder and rotating tailstock tip -In-process probe Fabr. Marposs -Blasluft controlled as an alternative to the coolant -Doppelspannzylinder -The controllable setting force of the counterspindle for the tailstock operation takes place via the programming function 11 Travel to fixed stop -Measuring cycles: It is possible to measure with a probe on the C axis. -The 5-axis simultaneous movement programs the axes: x, y, z, C and B. -4-Strip Bed - Rolling guides -Kuehlmittelspritzpistole -Compact filter requirement lnterlit -Additional coolant pump, 80 bar, for upper tool carrier -Späneförderer -Ethernet interface
This ad was created with MODUL MWS - the software solution of LogoTech.
table size L: 12000 mm, table size W: 3000 mm, max. plate size L: 12000 mm,
max. plate size W: 3000 mm, dimension L: 15100 mm, dimension W: 5000 mm, dimension H: 2500 mm, with 4 cutting heads; with 2 high pressure pu ...
used machine
table size L: 12000 mm, table size W: 3000 mm, max. plate size L: 12000 mm,
max. plate size W: 3000 mm, dimension L: 15100 mm, dimension W: 5000 mm, dimension H: 2500 mm, with 4 cutting heads; with 2 high pressure pumps Resato” type PJE-8-4000, max. working pressure 3800 bar, 7.6 l/min; control system MicroStep” type iMSNC, with digital control panel MSNC RO2, standalone control panel; 4 Allfi abrassive tanks; water treatment tank
turning diameter: 290 mmturning length: 1850 mmcontrol: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 1 - number of c-axes: 2 ...
used machine
turning diameter: 290 mm turning length: 1850 mm control: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 1 - number of c-axes: 2 - number of y-axes: 1 - number of b-axes: 1 WORKING RANGE TURNING: - swing diameter (max): 610 mm - turning diameter (max): 290 mm - worpiece length (max): 1850 mm MAIN SPINDLE: - spindle revolutions (min): 20 /min - spindle revolutions (max): 3200 /min - drive power: 69 kW - spindle torque: 1080 Nm - spindle bore diameter: 118 mm - c-axis: yes: COUNTER SPINDLE: - spindle revolutions (min): 20 /min - spindle revolutions (max): 3200 /min - c-axis: yes: X/Z SLIDE: - Y-axis travel: 210 mm - rotating range B-axis up to: 240 ° - rapid traverse Z: 24 mm/min - rapid traverse X: 60 mm/min - number of tool positions (total): 92 - - rotation speeds (max): 4000 /min - - drive power: 10 kW TOOL MAGAZINE: - magazin type: chain magazine: - number of positions: 80 ELECTRICAL SPECIFICATIONS: - total power consumption: 180 kW DIMENSIONS / WEIGHTS: - space requirements -left/right-: 8000 mm - space requirements -front/back-: 4000 mm - total height: 3200 mm - total weight approx.: 18500 kg ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: Equipment: -Main and counter spindle as integrated spindle motor -Differential pressure for main and counter spindles -separate speed limiting device for power chuck -Tool magazine 40x -Three-jaw power chuck with bore and quick-change jaw system FNC 250-72 Fabr. Forkard, incl, attachments for main spindle -Recording for counter spindle -Spindle flange with MKS holder and rotating tailstock tip -In-process probe Fabr. Marposs -Blasluft controlled as an alternative to the coolant -Doppelspannzylinder -The controllable setting force of the counterspindle for the tailstock operation takes place via the programming function 11 Travel to fixed stop -Measuring cycles: It is possible to measure with a probe on the C axis. -The 5-axis simultaneous movement programs the axes: x, y, z, C and B. -4-Strip Bed - Rolling guides -Kuehlmittelspritzpistole -Compact filter requirement lnterlit -Additional coolant pump, 80 bar, for upper tool carrier -Späneförderer -Ethernet interface
This ad was created with MODUL MWS - the software solution of LogoTech.
CNC lathe manufacturer OKUMA, model LB 15 II, control OSP 5020 L, built in 1990/91, commissioning 1993; 2-axis lathe; Rotation range to Ã? 340 mm; swing diameter over cross slide/bed 340 mm, Z axis travel 260 mm, ...
used machine
CNC lathe manufacturer OKUMA, model LB 15 II, control OSP 5020 L, built in 1990/91, commissioning 1993; 2-axis lathe; Rotation range to Ã? 340 mm; swing diameter over cross slide/bed 340 mm, Z axis travel 260 mm, stroke X-axis 520 mm, 200 mm; main spindle spindle diameter and spindle Ã? in front bearing 100 mm; hole diameter in the spindle 62 mm, programmable speeds 45-4,500 rpm ; Maximum torque 334 NM; Power 15 KW;
Equipment and accessories:
SAMECA bar loader type: SAM 65; Turret with 12 tool stations, conveyors; Coolant system
Dimensions
L x W x H approx.: 2,840 x 1.700 x 1,750 mm, weight approx. 5,700 kg
turning diameter: 390 mmturning length: 1850 mmcontrol: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 2 - number of c-axes: 2 ...
used machine
turning diameter: 390 mm turning length: 1850 mm control: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - number of turrets: 2 - number of c-axes: 2 - number of y-axes: 1 - number of b-axes: 1 WORKING RANGE TURNING: - swing diameter (max): 610 mm - turning diameter (max): 390 mm - worpiece length (max): 1850 mm MAIN SPINDLE: - spindle revolutions (min): 20 /min - spindle revolutions (max): 3200 /min - continuous speed variation: yes: - drive power: 69 kW - spindle torque: 1080 Nm - spindle bore diameter: 118 mm - c-axis: yes: COUNTER SPINDLE: - spindle revolutions (min): 20 /min - spindle revolutions (max): 3200 /min - c-axis: yes: X/Z SLIDE: - Y-axis travel: 210 mm - rotating range B-axis up to: 240 ° - rapid traverse Z: 46 mm/min - rapid traverse X: 60 mm/min - number of tool positions (total): 92 - - rotation speeds (max): 4000 /min - - drive power: 10 kW TOOL MAGAZINE: - magazin type: chain magazine: - number of positions: 80 ELECTRICAL SPECIFICATIONS: - total power consumption: 180 kW DIMENSIONS / WEIGHTS: - space requirements -left/right-: 8000 mm - space requirements -front/back-: 4000 mm - total height: 3200 mm - total weight approx.: 20000 kg ATTACHMENTS (TURNING): - chip conveyor: yes: - coolant unit: yes: Equipment: -Main and counter spindle as integrated spindle motor -Differential pressure for main and counter spindles -Tool turret below with CAPTO System 12 fold -Tool magazine 40x -Treibacken power chuck for main spindle -Doppelspannzylinder -The controllable setting force of the counterspindle for the tailstock operation takes place via the programming function 11 Travel to fixed stop -Measuring cycles: It is possible to measure with a probe on the C axis. -The 5-axis simultaneous movement programs the axes: x, y, z, C and B. -4-Strip Bed - Rolling guides -Kuehlmittelspritzpistole -Additional coolant pump, 80 bar, for upper tool carrier -Späneförderer -Ethernet interface
This ad was created with MODUL MWS - the software solution of LogoTech.
Injection unit:
EURMMAP classification 883V / 285
Screw diameter 38 mm
Screw piston stroke 150 mm
Screw speed 10-150 rpm.
Screw Torque 950 nm
Injection speed 80 cm3/sec.
Theor. Injection volume 170 cm3 spec. Injection pressure 1800 bar
Nozzle contact force 46 kN
Screw cylinder heating power up to 3 kW
Number of heating zone 1
Machine tonnage 90 t
Clamping unit:
KN clamping force 883
Forms gap 420 mm
Distance between the boards of 520 mm
Tool height of min. 100 mm
Ground clamping table 1050 mm
Dimensions 350 x 400 mm plates
Heating plates 3 x 2,5 kW
Hydr. Ejector stroke 250 mm
Upper hydraulic ejector 350 mm
Lower hydraulic ejector 450 mm
Pump drives 22 kW
Installed capacity of 34.5 kW
Operating pressure 140 bar
Oil tank capacity 240 dm ³
Weight of the machine without oil 5,000 kg
Dimensions (L x B x H) 1500 x 2500 x 3800 mm
x-travel: 762 mmy-travel: 435 mmz-travel: 510 mmControl: Fanuc i-Series distance spindle nose and table: 150 - 660 mmdistance spindle center to column: 512 mmMain spindle:: turning speed range - main spindle: 80 - 12.00 ...
used machine
x-travel: 762 mm y-travel: 435 mm z-travel: 510 mm Control: Fanuc i-Series distance spindle nose and table: 150 - 660 mm distance spindle center to column: 512 mm Main spindle:: turning speed range - main spindle: 80 - 12.000 min/-1 power capacity - main spindel: 18,5 / 15 kW max. Torque: 117 Nm tool taper: BT 40 work table:: table surface area: 920 x 435 mm max. table load: 600 kg number of T-slots: 4 T-slot - distance: 125 mm T-slot - width: 18H8 mm Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 max. tool diameter: 80 / 125 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,3 sec change-time chip to chip: 3,7 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min feed speeds: max. 15.000 mm/min total power requirement: 30 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,5 x 3,0 x 2,8 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 15 bar through spindle coolant: elektr. hand wheel: Automatic Tool Changer: spindle oil cooler: Airblow through center of spindle: autom. Frontdoor: Robot connection: Interface CNC - Machiningcenter Vertical DOOSAN - DNM 400 II
- Starting-Up in 2017 - TOP-Condition !
This ad was created with MODUL MWS - the software solution of LogoTech.
Type Z.32c
Ser. Nr. 040306
Cutting length 3200 mm
Cutting width 3200 mm
Max. saw blade protection 80 mm
Compressed air pressure 6 bar
Main motor 7,5 kW
Max. saw blade feed speed 13.5-27 m/min
Air cushion t ...
Type Z.32c
Ser. Nr. 040306
Cutting length 3200 mm
Cutting width 3200 mm
Max. saw blade protection 80 mm
Compressed air pressure 6 bar
Main motor 7,5 kW
Max. saw blade feed speed 13.5-27 m/min
Air cushion tables 4
Scoring unit 1,5 kW
Made in Italy
Weight 2880 kg
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 15 / 10 kWmax. Torque: 130 Nmtool taper: C ...
used machine
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 15 / 10 kW max. Torque: 130 Nm tool taper: CAT 40 / SK 40 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 800 kg rotatable: C: 360 ° max. workpiecediameter: 850 mm max. workpiece height: 550 mm tool magazin:: number of toolpositions: 32 pos. tool taper: CAT 40 / SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 8,0 kg change-time chip to chip: ca. 4,9 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Accelaration: 5 m/s² total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,5 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 20/40 bar through spindle coolant: paper band filter: elektr. hand wheel: Rotary screen: test probe: Heidenhain TS 649 tool setting: Laser oil mist extraction: 3D quickSET: Tool Kit Signal lamp - 4 colour: 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK
- NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)
This ad was created with MODUL MWS - the software solution of LogoTech.
Injection unit:
Screw diameter 20 mm
Injection volume 280 cm3 spec.
Injection pressure 2000 bar
Clamping unit:
Clamping force of 600 kN
Ejection stroke 100 mm
Mould installation height of 400 mm
Plate distance ...
used machine
Injection unit:
Screw diameter 20 mm
Injection volume 280 cm3 spec.
Injection pressure 2000 bar
Clamping unit:
Clamping force of 600 kN
Ejection stroke 100 mm
Mould installation height of 400 mm
Plate distance of 850 mm
Clamping plates 620 x 560 mm
Optional extras:
2 x hydraulic core pulling
Interface for belt conveyor
9 x control zones for mould heating
3 x expansion cards TT081 with 8 x additional control posts
TFT color flat screen
Quality monitoring package QUALIPACK 1
Min. height increased by 100 mm
Drive:
Pump drive power 15 kW
Weight 5100 kg
Dimensions (L x W x H) standard machine 3900 x 3200 x 3200 mm
x-travel: 1.150 mm y-travel: 710 mm z-travel: 710 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 10.000 min/-1 power capacity - main spindel: 30 / 20 kW max. Torque: 285 Nm tool taper: HSK A63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 800 / 1.500 x 800 mm max. table load: 800 kg rotatable: C: 360 x 0,001 ° max. workpiecediameter: ca. 950 mm max. workpiece height: ca. 650 mm T-slots: 11x 14 x 63 mm tool magazin:: number of toolpositions: 60 pos. tool taper: HSK A63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 10,0 kg change-time chip to chip: ca. 4,9 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min total power requirement: 58 kVA weight of the machine ca.: 18,0 t dimensions of the machine ca.: 8,5 x 6,0 x 3,2 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 20/40 bar through spindle coolant: paper band filter: Rotary screen: test probe: Heidenhain TS 649 elektr. hand wheel: tool setting: Laser Signal-Light: oil mist extraction: 3D quickSET: Tool Kit 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 100 monoBLOCK
- NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)
This ad was created with MODUL MWS - the software solution of LogoTech.
Francis Shaw Pin Barrel Extruder
Screw diam. 90mm
LD ratio 16:1
Roller feed
Barrel jacked / pinned
Clamp swing bolt
DC drive motor
63kW
1750rpm
45volts, 3 phase, 50 cycles
Complete with Panel and 4 x temperatur ...
Francis Shaw Pin Barrel Extruder
Screw diam. 90mm
LD ratio 16:1
Roller feed
Barrel jacked / pinned
Clamp swing bolt
DC drive motor
63kW
1750rpm
45volts, 3 phase, 50 cycles
Complete with Panel and 4 x temperature control units
Type Z.32c
Ser. Nr. 040306
Cutting length 3200 mm
Cutting width 3200 mm
Max. saw blade protection 80 mm
Compressed air pressure 6 bar
Main motor 7,5 kW
Max. saw blade feed speed 13.5-27 m/min
Air cushion tables 4
Scoring unit 1,5 kW
Made in Italy
Weight 2880 kg
Rubber extrudersFrancis Shaw90mm Pin Barrel
Francis Shaw Pin Barrel Extruder
Screw diam. 90mm
LD ratio 16:1
Roller feed
Barrel jacked / pinned
Clamp swing bolt
DC drive motor
63kW
1750rpm
45volts, 3 phase, 50 cycles
Complete with Panel and 4 x temperature control units
Francis Shaw90mm Pin Barrel
Francis Shaw Pin Barrel Extruder
Screw diam. 90mm
LD ratio 16:1
Roller feed
Barrel jacked / pinned
Clamp swing bolt
DC drive motor
63kW
1750rpm
45volts, 3 phase, 50 cycles
Complete with Panel and 4 x temperature control units
Multi-Slide LatheCAMIC29
Bar capacity 32 mm
number of revolutions 6000
Motor power 3.7 kW
maximum stroke of the turret 100 mm
maximum distance between the turret and clamp 170 mm
minimum distance between the turret and clamp 70 mm
number six port holes in tool turret
Tools Number 4 on slides
Controlled Axes Number 6
Poligonatore / fresafiletti
Iemca charger
2005
lifting and tipping device for drumsVincaTO300
VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)
Automatics (Lathes) For BarsGildemeisterRNF 40/200
OVERVIEW:
Brand: Gildemeister
Model: RNF 40/200
Application type: Turning
Machine type: Lathe
Availability: Immediately
Construction year: 1980
Location: Hungary
Origin country: Germany
GENERAL DATA:
Measurements width: 3600 mm
Measurements depth: 3200 mm
Measurements height: 2000 mm
Machine weight: 3800 kg
MAIN DRIVE:
Number of spindles: 1
Spindle speed range: 2250 1/min
CONTROL UNIT:
Brand: HUNOR
Model: PNC 721
MOVEMENT:
X-AXIS movement: 320 mm
Y-AXIS movement: 600 mm
TURRET:
Number of turrets: 1
TOOLS:
Max tool diameter: 60 mm
Max tool length: 600 mm
MEDIA:
Main electronic connection: 380 V / 50 Hz
ADDITIONAL EQUIPMENT:
1 - Tools
2 – Bearings
3 - Jaws (Hard and Soft)
Extrusion blow molding machinesUROLAMRS-M4
UROLA MRS-M4 Rotary extrusion blow molding machineNmber of molds: 4
Number of heads: 1
Operation: Oleodynamic-Mechanical
Molds clamping force: 3000 kg
Maximum production depending on the container: 2600 P / H
Packaging dimensions:
Blowable volume: (Maximum capacity): 2000cc Maximum diameter: 110mm
Maximum height: 325mm
Dimensions of plate and mold:
Maximum opening molds: 140mm
Minimum half-mold thickness: 80mm (* For the rest of the dimensions, see the drawing of the mold carrier)
Extruder:
Screw diameter: 80mm
Electric motor power: 40 Kw
Number of thermoregulable zones: 10
Plasticizing capacity: 140 kg / h
Maximum consumption:
Total installed power: 95 Kw
Average power consumed: 75 Kw
Water at 7º C, 4 Kg / cm2:
- Flow: 15 m3 / h
- Refrigerating power consumed: 40000 kcal / h AIR AT 8 Kg / cm2
- Flow rate: 1.4 m3 / min
Air pressure: 5 - 7 bar
There are two machines available: X-travel: 230mm, z-travel: 500mm, max. bar capacity diameter: 50mm, max. swing/ over bed: 320mm, center distance: 1250mm, rotational speed: 35-4750/min, number of tools: 12 on 2 revolver, spindle bore: 60mm, spindele cone: A2-6, control: Mazatrol T-Plus, year of construction machine 1/ 2: 1997/ 1998, including gantry loading system MAZAK GL-100A, 2x hydraulic Kitagawa chuck, chip conveyor, Twin-8 clamping chuck and double revolver.
Press BrakeWEINBRENNEREGP 80/1600
Max. pressing force: 800kN, working length: 1600mm, stroke: 160mm, hydraulic pressure: 255bar, stopping time: 120ms, security distance: 192mm, weight: 8t, the control is defective.
Vertical machine center (molding type)YCMNSV 102A
YCM-NSV-102A-molding type high speed vertical CNC machining centers
NSV102A
Spindle
Spindle Speed (opt.) rpm
12.000 Max. Spindle Motor Power kW
30 Spindle Taper
BBT40 Travel
X-axis Travel mm
1.020 Y-axis Travel mm
600 z-axis Travel mm
600 Distance Between Spindle Nose & Table Top mm
100 ~ 700 Table
Table Size mm
1.120 x 650 No. T-Slots x Size x Pitch mm
6 x 18 x 100 Max. Load on Table kg
1.000 Feedrate
Rapid Feedrate (X/Y/Z) m/min.
60/60/48 Cutting Feedrate mm/min.
1 ~ 20,000 ATC
Tool Magazine Capacity (opt.)
30 Max. Tool Weight kg
6 Max. Tool Dimensions (w/o Adjecdent) mm
ø 76 x 300 (ø 125 x 300) General
Pneumatic Supplier kg/c?
5.5 Power Consumption (Transformer), kVA
37.4 (40) Machine Weight kg
7.000 YCM NSV102A Vertical machine center (molding type)
Year 2013
CNC Fanuc YCM MPX-200FB
OPTION INSIDE:
Chip Conveyor.
CTS 30 BAR (Hight coolant pump)
HSSC (harmonic spindle speed control)
Data Server
Ethernet
Manual guide high speed
Air gun
Water gun
On power and on working
Power on time 18.500 hours
CNC Turning CentersDOOSANPUMA 3100
Total weight (approx.): 5850
Spindle hole diameter: 115 mm
X-axis stroke: 293 mm
Stroke in the Z axis: 830 mm
Circulation diameter above the bed max .: 850 mm
Swing diameter above supporter max: 670 mm
Max. turning diameter above the bed: 525 mm
Max. Chamfer length: 760 mm
Max. diameter of turning bar: 102 mm
Max. workpiece weight without the use of a tailstock (including chuck weight = 55 kg) 390 kg
Max. workpiece weight when using a tailstock (including chuck weight = 55 kg) 1000 kg
Control system: fanuc
MACCHINA DIMACCHINA DI
WATER JET CUTTING MACHINE
BRAND Bystronic
Smart Byjet MODEL 3015
YEAR 2000
Features:
6800 mm length Width 4500 mm
Height 2500 mm
Nominal size material x = 3000 mm y = 1500 mm
Working area x = y = z = 3068 1544 mm 250 mm mm
Number of heads 1/2
Max working pressure bar 3600
Datasheet attached in documents
CNC Turning CentreMazakMultiplex 6200 GL 100C
Control: Mazatrol Fusion 640T
Turning length: 180 mm
Turning diameter: 260 mm
Bar capacity: 2 x 51 mm
Spindle speed: 2x 5.000 RPM
Main motor: 2x 22/15 kW
Total number of tooling stations: 2x 12
Number of driven tools: 2x 12
Injection molding machinesKrauss Maffei125-700 C2
OVERVIEW:
Brand: Krauss Maffei
Model: 125-700 C2
Application type: Injection Moulding
Machine type: Injection Moulding Machine
Availability: 01/07/2018
Construction year: 1998
Production hours: 34200
Location: Czech Republic
Origin country: Germany
GENERAL DATA:
Measurements width: 4670 mm
Measurements depth: 1480 mm
Measurements height: 2160 mm
Machine weight: 6500 kg
CONTOL UNIT:
Brand: Krauss Maffei
INJECTION UNIT:
Stroke volume: 377 cm³
Injection pressure: 1892 bar
CLAMPING UNIT:
Clamping force: 1250 kN
MEDIA:
Pump drive power: 22 kW
ADDITIONAL EQUIPMENT:
1 - 16x Hot channels control
2 - Air venting valve
3 - 2x Core pull cylinder
4 - 4x Water batteries
CNC Turning CentersDOOSANPuma 3100 L
CNC lathe DOOSAN PUMA 3100 L
Total weight (approx.) 5850 kg
Rotary Drills Continuous Variable (rpm): 20-2800
Front bearing diameter: 160 mm
Bore diameter: 115 mm
Internal diameter of the draw tube: 103 mm
X-axis stroke: 293 mm
Z-axis travel: 830 mm
X / Z Axis Rapid Traverse: 30/30 (m / min)
Work shift in X / Z-linear interpolation (max.): 14000 (mm / rev)
X / Z Ball Screw Diameter: 32/40 mm
Average diameter above bed max. 850 mm
Swing over support max. : 670 mm
Max. working diameter over bed: 525 mm
Max. drilling length in chuck: 760 mm
Max. Reverse Bar Diameter: 102 mm
Max. workpiece weight without the use of a tailstock (including chuck weight = 55 kg): 390 kg
Max. workpiece weight using a tailstock (including chuck weight = 55 kg): 1000 kg
Control system: DOOSAN FANUC
APV and SPX15000 liters/hour
Flavoured Still Water Production Equipment APV 15 000 l/h
Complete flavoured still water production plant made by French APV and Polish SPX in year 2008. The processing plant has every item from sugar melting, flavouring, pasteurizing, storaging, chilled water and steam production. All design is made by APV, control system is build with Siemens Simatic S7 series PLC.
Techncial charasteristics:
Manufacturer APV and SPX
Installation year 2008
Capacity 15 000 liters / hour
Main equipment
• Liquiverter 500 liters stainless steel sugar mixing tank with 18.5 kW agitator
• Compond syrup mixing tanks 2 x 6000 liters, both with 4 kW agitator and automatic CIP
• Sugar measuring and flavouring unit
• Sugar Storage Tanks 2 x 17400 liters, insulated tanks with automatic CIP and air blowing system
• Storage tank before filling line, capacity 6000 liters with automatic CIP, nitrogen injection system and 3 kW discharge pump.
• Steam generator SMS 3.5 bar, 150 C
• Water chiller
• CIP line with 4 tanks.
Snails (Screws)Korea and AustriaEngel controller parts, Screw
Dear All.
we have new engel controller spare parts and we can provide new screw and barrel ass'y which is made by Korea.
Please contact and we can serve you with our best.
G.J.CHOI of Korea
Injection molding machinesBattenfeldHM 400/3400
OVERVIEW:
Brand: Battenfeld
Model: HM 400/3400
Application type: Injection Moulding
Machine type: Injection Moulding Machine
Availability: Immediately
Construction year: 2006
Production hours: 34000
Location: Czech Republic
Origin country: Austria
GENERAL DATA:
Measurements width: 6500 mm
Measurements depth: 2400 mm
Measurements height: 2200 mm
Machine weight: 21000 kg
CONTOL UNIT:
Brand: Battenfeld
Model: UNILOG B4
INJECTION UNIT:
Stroke volume: 1937 cm³
Injection pressure: 1573 bar
Screw diameter: 85 mm
CLAMPING UNIT:
Clamping force: 4000 kN
ADDITIONAL EQUIPMENT:
1 - Linear robot (2007)
2 - Moretto Gravimetric blender Moretto (2012)
3 - Battenfeld Feeding line (2007)
Injection molding machinesEngelEM 2440/380
Angebot/Offer:
Engel EM 2440/380
Vollelektrische Spritzgussmaschine mit Kniehebel
Bezeichnung: Engel CC 200 e-motion EM2440/380T
B.J.: 2010
Zylinderdurchmesser: 70mm
Barriereschnecke verbaut
Interner Heisskanal
Maximale Zuhaltekraft 380 Tonnen (3800KN)
Öffnungsweg: 700 mm
Auswerferweg: 210 mm
Zentrierring: 160 mm
Automatics (Lathes) For BarsSTAR MICRONICSRNC-16B
OVERVIEW:
Brand: STAR MICRONICS
Model: RNC-16B
Application type: Turning
Machine type: Lathe
Availability: Immediately
Construction year: 1995
Production hours: 84000
Location: Germany
Origin country: Japan
GENERAL DATA:
Measurements width: 1195 mm
Measurements depth: 1815 mm
Measurements height: 1710 mm
Machine weight: 1500 kg
MAIN DRIVE:
Number of spindles: 1
Spindle speed range: 300-8000 1/min
CONTROL UNIT:
Brand: FANUC
Model: Series 18-T
MAIN DRIVE:
X-AXIS movement: 12000 mm/min.
XB-AXIS movement: 15000 mm/min.
Z-AXIS movement: 15000 mm/min.
TOOLS:
Max tool diameter: 16 mm
Max tool length: 130 mm
MEDIA:
Main electronic connection: 230 V
Power consumption: 5 kVA
Chip conveyer: yes
Internal cooling: yes
ADDITIONAL EQUIPMENT:
1 - Bar loader FMB Minimag 3200
2 - 3-spindle drilling head
3 - 5x Tool holder type 3
ZVUHorizontal AL 30
Horizontal Fermentation tank 300 HL, Aluminium
Horizontal aluminium tanks used beer storage tanks. Tanks are designed for 1 bar over pressure and equipped with service manifold. Tanks are suitable for beer, wine, water etc.
Technical Details:
Manufacturer: ZVU
Manufacturer's type: Horizontal AL 30
Made in year: 1971
Capacity: 300 hl
Application: Storage tank for beer, water etc
Number of thanks available: 97
Tank diameter: 2.40 m
Tank total length: 7.2 m
Tank height: 2.80 m
IMA Celik, TurkeyVertical, outdoor
Bright Beer Tank BBT 2 x 1800 hl IMA
These vertical outdoor BBT’s were made by IMA Celik in 2001.
Manufacturer: IMA Celik, Turkey
Type: Vertical, outdoor
Year: 2001
Capacity: 1.800 hl (total), 1.750 hl (useful)
Number of tanks: 2
Pressure: 2.0 bar (working), 2.6 bar (test)
Dimensions: 16.208 mm (height), 4.200 mm (inside diameter)
Weight: 8.100 kg without insulation
Insulation: HR Polyurethane foam, thickness 150 mm (cyl), 120 mm (cone)
Cooling: 1 zone, glycol
Support: Ring-supported from the bottom
CNC Punching MachinesAMADAVipros 2510C
OVERVIEW:
Brand: AMADA
Model: Vipros 2510C
Application type: Punching
Machine type: Turret Punching Machine
Availability: Immediately
Construction year: 2006
Production hours: 18000
Location: India
Origin country: Japan
GENERAL DATA:
Measurements width: 4900 mm
Measurements depth: 5250 mm
Measurements height: 2200 mm
Machine weight: 11000 kg
MAIN DRIVE:
Punching force: 200 kN
Maximum sheet thickness: 4 mm
CONTROL UNIT:
Brand: Fanuc
Model: Series 18i-PB
Interface: CF Card
MOVEMENT:
X-AXIS:
Movement: 2500 mm
Y-AXIS:
Movement: 1250 mm
MAX MATERIAL THICKNESS:
Steel: 6 mm
Stainless steel: 3 mm
Aluminum: 6 mm
TOOLS:
No. of stations: 31
Max. tool diameter: 88.9 mm
No. of index: 2
MEDIA:
Main electronic connection: 220 V
Power consumption: 30 kVA
Air pressure: 6 bar
Lubrication tank: 1 L
Oil tank: 150 L
ADDITIONAL EQUIPMENT:
1 - Software Bundle
Injection molding machinesEngelVC 330/80 (Low Run Hours)
Only 28k run hours. At our works in Wellingborough awaiting refurbishment. Tie-barless Engel 80T originally manufactured in 2002. Engel have become renowned for their innovative design which allows this 80T machine to mould with a wide variety of tools that other 80T machines couldn’t fit in. If you’re not familiar with this tie-barless design, feel free to make an appointment to view the machine and take a closer look.
Manufacturer: Engel
Model: VC 330/80
Viewing: Available to inspect by appointment
Condition: Refurbished with guarantee
Year: 2002
Clamp Force (t): 80
Screw Diameter (mm): 25
Max Shot Weight (PS) (g): 62
Control System: Microprocessor
Lead Time: August
Hours: 27786
In Production: Yes
Location: STV Machinery
Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbished machines are delivered fault free and leak free.
Injection molding machinesArburg420M Two Colour Machine
Awaiting refurbishment at our works is an Arburg 420M 1000-250/250 with Multronica controller. The machine is a twin-shot (two-colour) machine with one injection unit mounted horizontally and one injection unit mounted vertically on the tie-bards for injection on the split-line. Both plasticising units are the same injection unit designation and both are fitted with 30mm barrels, each delivering a shot weight of 89g in PS.
The tie-bar spacing is 420mm x 420mm.
We don’t tend to see many twin shot machines on the market so this a rare example from a top manufacturer.
Manufacturer: Arburg
Model: 420M 1000-250/250
Viewing: Available to inspect by appointment
Condition: Refurbished with guarantee
Clamp Force (t): 100
Screw Diameter (mm): 30 & 30
Max Shot Weight (PS) (g): 89 + 89
Control System: Multronica
Lead Time: 4 weeks from order
In Production: Yes
Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order.
Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.
Injection Moulding MachineWINDSORHSI 3025-004
Mould platens dimensions: 3000x2700mm, distance between tie bars: 2000x1700mm, opening stroke: 3700mm, nozzle diameter: 80mm, nozzle immersions depth: 45mm, centering ring: 250mm, heating output: 105kW, control: Power Panel BGR, weight: 250t, operational hours: ca. 20000h.
Max. turning diameter: 100mm, number of tool slots: 16, control: SIEMENS 840D, including Bar Loader IRCO PROFImat 42.8 196.8: max. bar diameter: 40mm, max. bar length: 3000mm.
ShredderWEBARIAG5 360
With motor AEG AM 112 M74, was used for shredding plastic bottles and aluminium cans.
Die Cutting PressesCHIESASANSON F1 A 30T/ F1 BABY
there are two machines available: (1) Die Cutting Press CHIESA SANSON F1 BABY: punching force: 22.5t, stroke: 150mm, travel: 2000mm, shearing width: 1880mm, working table height: 600mm, pneumatic pressure: 8bar, piston stroke: 85mm, length: 2160mm, width: 2450mm, weight: 3.85t, year of construction: 1993 (2) Die Cutting Press CHIESA SANSON F1 A 30T: punching force: 30t, stroke: 150mm, travel: 1860mm, shearing width: 2000mm, working table height: 1000mm, pneumatic pressure: 8bar, piston stroke: 85mm, weight: 5t, year of construction: 2003.
For dewatering of mud, max. drainage output: 20m³/d, power consumption: 12kWh/d, water supply: 4-8bar, water consumption: 1-3m³/d, compressed air supply: 6-8bar, compressed air consumption: <2Nm³/h, Plant ready to use installed in a container, dimensions: 6100x2500x2900m. Additionally there are 2 kits available packed in crates andready for shipment.
Drilling and Grooving MachinePFLUKAKPM 126
Compressed air supply: 6bar, including Vibratory Conveyor MATTERN SE 05 STB R.
ESAU & HUEBER GmbHSEMI/-fill
Beer KEG Filling Line Esau & Hueber Semiautomatic Party-KEG 5 liter 200 KEG/hour
The semi automatic party-KEG-filler with 4 filling heads and capacity beginning from 100 up to 200 keg/h, made by Esau & Hueber GmbH in the year 2000. The KEG is placed manually onto the filler and lifted by two-hand operation. A sensor recognizes the arriving of the keg and starts automatically the filling process. The pre-air valve and the return-air will open. The keg gets purged with CO2 for approximately 5 seconds and the air opened simultaneously and the keg will be filled from bottom to top. A sensor probe – installed into the return-air channel – controls the filling process. A lamp indicates the finished filling process – the beer valve will be closed. The return-air valve stays open for a moment to relieve the filling pressure inside the keg to prevent any spilling when removing the keg from the filling head.
Utilities, beer, cleaning agents, gas load and a return gas supplied via valve and piping systems controlled by Esau Hueber control system. The design is made of stainless steel frame with a work desk, on which are arranged lift cylinders and pneumatic switches. The frame is equipped with support devices to accommodate all the remaining components. Bottling of beverages produced in the automatic mode. All other processes are performed manually. Equipment is good condition and ready to delivery.
Manufacturer: ESAU & HUEBER GmbH
Manufacturing year: 2000
Type: SEMI/-fill
Capacity: 100 – 200 keg/h
Number of filling heads: 4
Serial number: 7003
Product pressure: 1,5 – 2,0 bar
Product temperature: >4 – 5 0C
Voltage: 230 V, 50 Hz
Operating air: max. 7,0 bar
Pressure CO2: max. 8,0 bar
CIP / washing up to 120 0C / max. pressure 1,5 bar
Sheet Metal Machining CentresCITIZENCITICOM L32
OVERVIEW:
Brand: CITIZEN
Model: CINCOM L32
Application type: Turning
Machine type: Machining Center
Availability: Immediately
Construction year: 2000
Production hours: 73005
Location: Germany
Origin country: Japan
GENERAL DATA:
Measurements width: 2520 mm
Measurements depth: 1300 mm
Measurements height: 1790 mm
Machine weight: 2720 kg
MAIN DRIVE:
Number of spindles: 1
Spindle speed range: 200-6000 1/min
CONTROL UNIT:
Brand: Mitsubishi
Model: Meldas 500
MAIN DRIVE:
X-AXIS Rapid Traverse: 16 m/min
Y-AXIS Rapid Traverse: 20 m/min
Z-AXIS Rapid Traverse: 18 m/min
TOOLS:
Max tool diameter: 32 mm
Max tool length: 250 mm
MEDIA:
Main electronic connection: 380 V
Power consumption: 11 kVA
Chip conveyer: yes
Internal cooling: yes
ADDITIONAL EQUIPMENT:
1 - FBM turbo 5-42 Bar loader
Vertical Turning MachinesPITTLERPV 1250/1-1
Vertical Turning, Drilling and Milling Centre
2009 – 2011 start-up of the machine
chuck-/table diameter max. mm 1.250
turning diameter mm 1.250
swing max. mm 1.400
distance between spindle flange and tool holder mm 1.850
travel X – from table centre to ATC on the right side of the
machine mm 1.555
travel X – beyond the machine centre to the left side of the
machine mm - 455
travel – Z-axis mm 1.000
C-axis – programmable increment degree 360.000 x 0,001
positioning accuracy sec. +/- 2
spindle flange diameter DIN 6353 mm 380
spindle speed rpm 800
no. of range 2
rapid motion – X-axis mm/min 40.000
rapid motion – Z-axis mm/min 24.000
Swivelling Head with Turning- Milling- and Grinding Spindle – B- and Y-axis
1 tool holder CAPTO C8
1 tool holding fixture for drilling, milling and grinding tools CAPTO C8
spindle speed max. rpm 8.000
torque max. Nm 140
swivelling range B-axis degree 0 – 270
travel – Y-axis mm +/- 115
Tool Magazine
disc magazine station 36
tool holder CAPTO C8
tool diameter mm 250
tool length max. mm 400
Power Requirement Main Spindle Motor
electrics – voltage / frequency V/Hz 400/50
power requirement at 100% duty cycle kW 2 x 52
torque max. at 40% duty cycle Nm 7.500
Machine dimension and weight
machine weight kgs 29.000
accessories kgs 4.000
machine dimension mm 7.600 x 3.660
space requirement incl. coolant device approx. mm 11.500 x 4.200
machine height mm 4.528
Accessories and further Informations:
CNC-Control System SIEMENS 840D
TRANSMIT transformation in peripheral surface
extension by grinding cycles of the SIEMENS 840D
language German and English
safety integrated
tool Life Display
workpiece measurement with touch probe make MARPOSS, type T25
teleservice – for integrated PLC of the Sinumerik 840D
6-jaw power chuck with oscillation mechanism for low-deformation clamping
of thin-walled components., make SCHUNK, type ROTA NCR 800 Z 520
changeable flange mounted under the chuck, to compensate the machining
height and low workpieces
hydraulic clamping cylinder for internal and external clamping, programmable
stroke Control
clamping pressure reduction for a 2. clamping pressure, automatic available
in the program
clamping Pressure regulation
dressing attachment with Single Grain dressing Diamond
chip conveyor - hinged belt conveyor, discharge height 1,250 mm
coolant attachment and automatic coolant cleaning system with coolant tank
1.500 l make KNOLL, coolant pressure 20l/min at 50 bar, 20l/min at 13 bar,
300l at 3 bar
machining area – flushing
flushing gun, hand-operated
working area complete covered
hydraulic
electric cabinet
tool life display, each tool position separately programmable, acquisition in the
PLC control and display on the LC display:
1. active tool
2. service life
3. remaining tool life
4. number of still available tools
The machine was used in only 1 shift.
Vertical Turning CentresPITTLERPV 1250/1-1
Vertical Turning, Drilling and Milling Centre
Year of manufacture 2009 - 2011 start-up of the machine
chuck-/table diameter max. mm 1.250
turning diameter mm 1.250
swing max. mm 1.400
distance between spindle flange and tool holder mm 1.850
travel X – from table centre to ATC on the right side of the
machine mm 1.555
travel X – beyond the machine centre to the left side of the
machine mm - 455
travel – Z-axis mm 1.000
C-axis – programmable increment degree 360.000 x 0,001
positioning accuracy sec. +/- 2
spindle flange diameter DIN 6353 mm 380
spindle speed rpm 800
no. of range 2
rapid motion – X-axis mm/min 40.000
rapid motion – Z-axis mm/min 24.000
Swivelling Head with Turning- Milling- and Grinding Spindle – B- and Y-axis
1 tool holder CAPTO C8
1 tool holding fixture for drilling, milling and grinding tools CAPTO C8
spindle speed max. rpm 8.000
torque max. Nm 140
swivelling range B-axis degree 0 – 270
travel – Y-axis mm +/- 115
Tool Magazine
disc magazine station 36
tool holder CAPTO C8
tool diameter mm 250
tool length max. mm 400
Power Requirement Main Spindle Motor
electrics – voltage / frequency V/Hz 400/50
power requirement at 100% duty cycle kW 2 x 52
torque max. at 40% duty cycle Nm 7.500
Machine dimension and weight
machine weight kgs 29.000
accessories kgs 4.000
machine dimension mm 7.600 x 3.660
space requirement incl. coolant device approx. mm 11.500 x 4.200
machine height mm 4.528
Accessories and further Informations:
CNC-Control System SIEMENS 840D
TRANSMIT transformation in peripheral surface
extension by grinding cycles of the SIEMENS 840D
language German and English
safety integrated
tool Life Display
workpiece measurement with touch probe make MARPOSS, type T25
teleservice – for integrated PLC of the Sinumerik 840D
6-jaw power chuck with oscillation mechanism for low-deformation clamping of
thin-walled components., make SCHUNK, type ROTA NCR 800 Z 520
changeable flange mounted under the chuck, to compensate the machining height
and low workpieces
hydraulic clamping cylinder for internal and external clamping, programmable
stroke Control
clamping pressure reduction for a 2. clamping pressure, automatic available in the
program
clamping Pressure regulation
dressing attachment with Single Grain dressing Diamond
chip conveyor - hinged belt conveyor, discharge height 1,250 mm
coolant attachment and automatic coolant cleaning system with coolant tank
1.500 l make KNOLL, coolant pressure 20l/min at 50 bar, 20l/min at 13 bar,
300l at 3 bar
machining area – flushing
flushing gun, hand-operated
working area complete covered
hydraulic
electric cabinet
tool life display, each tool position separately programmable, acquisition in the
PLC control and display on the LC display:
1. active tool
2. service life
3. remaining tool life
4. number of still available tools
The machine was used in only 1 shift.
Banderoling machinesVega75
Folder gluer Vega 75 with three discs for glue points :
-Minimum box size folded: mm. 25
-Maximum open box size: mm. 750
-Minimum length: 80 mm - Maximum length: mm. 750
-Gluing: on the side and automatic lock bottom
-Delivery carpet length: mt. 2.50
-Ideal for stretched and corrugated cardboard (up to low wave)
-With pre-folding device
-Gluing: with tank and 2 upper wheels for automatic lock bottom
-Machine dimensions: length mt. 10.35- width mt. 1.46
-Weight kg. About 3800
-Safety devices: photocell barrier around the machine, 4 stop buttons
-Three-phase manifold motor with variable speed
-Available: manual and wiring diagram
Punching MachinesFINN POWERF6 25 SB
FINN POWER F6 25 SB punching machine (1998):
In working condition
Working hours: Machine On: 56.668
Punching force: 300 kN
Max. working pressure: 300 BAR
Punching Stroke: Hydraulic
Control: Siemens
Stroke depth adjustment: Numerically adjustable
Stroke length adjustment: Programmable
Ram speed adjustment: Programmable
Number of turret stations: 20
Max. Punch diameter: 89 mm
Max. material thickness: 8 mm.
Maximum blank weight: 200 kgs.
Work area w/o repositioning: 1500 x 2500 mm.
Work area with repositioning: 1500 x 5000 mm.
X-axis travel: 2500 mm.
Y-axis travel: 1500 mm.
Max. liner travel speed X-axis: 3460 IPM
Max. diagonal travel speed: 4500 IPM
Minimum programmable increment: 1/10000
Accuracy according VDI/DGQ 3441
Positional Deviation (Pa): +/-.05 mm.
Positional scatter (Ps): +/-.025mm.
Hit rates max:
Mibbling: 800 HPM
1" Increments: 450 HPM
Torret confirguration:
20 stations:
- Stations D 2x index
- Stations B 10x
- Stations C 6x (2x index)
2 Multitool divided as following:
1XMT 24 / 8
1XMT 10 / 16
FINN POWERF6 25 SB
EXCELLENT FINN POWER F6 25 SB
Punching machine · Year (1998)
In working condition
Working hours: Machine On: 56.668
Punching force: 300 kN
Max. working pressure: 300 BAR
Punching Stroke: Hydraulic
Control: Siemens
Stroke depth adjustment: Numerically adjustable
Stroke length adjustment: Programmable
Ram speed adjustment: Programmable
Number of turret stations: 20
Max. Punch diameter: 89 mm
Max. material thickness: 8 mm.
Maximum blank weight: 200 kgs.
Work area w/o repositioning: 1500 x 2500 mm.
Work area with repositioning: 1500 x 5000 mm.
X-axis travel: 2500 mm.
Y-axis travel: 1500 mm.
Max. liner travel speed X-axis: 3460 IPM
Max. diagonal travel speed: 4500 IPM
Minimum programmable increment: 1/10000
Accuracy according VDI/DGQ 3441
Positional Deviation (Pa): +/-.05 mm.
Positional scatter (Ps): +/-.025mm.
Hit rates max:
Mibbling: 800 HPM
1" Increments: 450 HPM
Torret confirguration:
20 stations:
- Stations D 2x index
- Stations B 10x
- Stations C 6x (2x index)
2 Multitool divided as following:
1XMT 24 / 8
1XMT 10 / 16
Steam turbine ABB/Stal 25MVAABB/StalMP-10
Steam turbine 25 MVA from 1996. Renovated 2011 and never used since complete with all auxiliary systems (excluding steam generator)
Supplier ABB both for turbine and alternator
Included for this object is turbine, alternator, auxiliary system (both fluid pumps, hydraulic system) and breaker
Electric effect 21612kW Heating effect: 44120 kW
84 bar 520dg.
8950 rpm
Generator: GBA1120SH
BFM 800 mm. O.T. side sealing – Ref.1M236BFM800 mm. O.T. side sealing
BFM 800 mm. for Open Top and Side sealed PE PP PA bags
Double reel holder
In-line punching unit for banana handle
2 perforating pistons bar
Photocell for printed material
Open top + side sealing bars
Belt extraction system
Bag counting unit for automatick stacking
Brushless servo motor
ELBA 1200 mm. Open Top, Side Sealed bags – Ref.1M2ELBA1200 mm. Open Top, Side Sealed
ELBA 1200 mm.BAG MAKER
Double reel holder
Open to and side sealing bars
Maximum sealing width 1200 mm.
For PE P PA bags
Slit and seal unit with hot knife
Belts extraction and stacking table
Control panel
Production linesTETRA PACKHoyer Rollo 27-N-2
Tetra Pak Hoyer Rollo ice cream stick bar and multi lane flow wrapper line
Capacity 12,000 - 18,000 pieces per hour depending on product size. 10 sticks width. 5 lane sealer. 2 stage filling plus dipping. Complete with 1 set moul
Injection molding machinesBattenfeldBA500/210TM
injection moulding machine. 35mm screw, unilog B" controller, 490x490 patten plate, 320x320 between tie bars, 50mm tie bar, 210 injection unit. 380 volts, spare set heatter bands.
CompressorSullairBDS 22HH
Compressor
Sullair BDS 22HH Year 2003 Rotary Screw Compressor 22Kw 9.5Bar with Compressed Air Steel Receiver Year 2003 Manufactured by Advanced Compressor Engineering Ltd 875 Litres capacity 11.5 Bar.
BOILER & PIPING IND7181
Tube & Shell:
Manuf: "boiler and piping in"
Model:7181
Year:2002,
14 sq.m,
Test press: 15 bar, Des temp 100C
Heat exchangerBOILER & PIPING IND7098
Tube & Shell:
Manuf: "boiler and piping in"
Model:7098
Year:2001,
18 sq.m, Test press: 15 bar, Des temp 100C
