bar turning used for sale

Shank size 8x8 mm, 11-piece set, equipped with ground carbide inserts, packaged in a practical aluminum case. Auction-ID: A7-50066-287

turning diameter: max. 356 mm turning length: 1.255 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm distance between spindles: 1.511 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 91 mm max. bar capacity: 80 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm axis stroke:: x-travel: 260 mm z-travel: 1.345 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 5,5 / 3,7 kW total power requirement: 50 kVA  ...

turning speeds: 0 - 8.000 U/min hollow: 20 mm control: FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition; it can be tested by prior arrangement.

Parallel Lathe COLCHESTER MASTER VS 3250 Year of construction: 1996 Between points: 1250 mm Max diameter in front of bench: Ø 340 mm Maxi Ø over saddle: Ø 160 mm Centre height: 170 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 3250 RPM 3-jaws chuck Ø 200 mm Turret Mutifix B Metric Withworth threading 3-points steady Tailstock CM4 Scale WIZARD 150 PLUS Longitudinal + transversal auto feeds Spindle speed by electric drive Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1400 x 1700 mm Weight: approx 2 T

The machine is in good technical condition; testing is possible by prior arrangement. Sinumerik 840 SL control system, turret with live tooling, chip conveyor.

The machine is in good technical condition; it can be tested by prior arrangement.

The machine is equipped with a tailstock as well as three-jaw chuck, jaw width: 380 mm, furthermore a large batch of tool holders, clamping jaws and another jaw chuck, incl. Chip conveyor. Additional technical specifications: • frequency: 50/60 Hz • nominal voltage: 52 A

CNC Turning and Milling Center DMG CTX GAMMA 2000 TC (spindle hours may increase slightly). The machine is equipped with an automatic steady rest from SMW AUTOBLOK, a three-jaw chuck (manufacturer SMW, diameter: 300 mm), additional clamping jaws, another jaw chuck, as well as a chip conveyor and coolant system. Transport warning: Caution: the machine can be transported on a truck up to 3000 mm wide. Additional technical specifications: • Spindle distance: 2260 mm • max. workpiece weight chuck parts/chuck weight: 250/150 kg • max. workpiece center of gravity from spindle flange: 250 mm • Travel path Z2: 1910 mm • Travel path Z3: 1910 mm • Steady rest clamping range DW: 45 - 310 mm • Steady rest width C: 145 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm

The machine is equipped with a tailstock, a 12-station tool turret as well as a collet chuck, incl. chip conveyor

The machine is equipped with a tailstock, a three-jaw chuck, a chip conveyor, and a coolant system. Attention: spindle hours may increase slightly! Additional technical specifications: • Nominal voltage: 125 A • Spindle distance: 1020 mm • Max. workpiece weight chuck parts/chuck weight: 100 kg • Max. workpiece center of gravity from spindle flange: 120 mm • Travel X1: from -10 to 490 mm • Travel Y1: +-100 mm • Travel Z2: 600 mm • Travel Z3: 800 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm • Slide rapid traverse speed Z-axis: 40 m/min • Path resolution Z-axis: 0,001 mmm • B-axis max. swivel speed: 70 rpm • Angular resolution: 0,001° • Quill force: 8 kN

The machine is equipped with a tailstock, a 12-station tool turret as well as a 3-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, incl. chip conveyor

The machine is equipped with a sub-spindle (equipped with a 3-jaw chuck SMW AUTOBLOK, diameter: 210 mm) as well as a 12-station tool turret, incl. driven tool stations, as well as an SMW AUTOBLOK 3-jaw chuck, diameter: 250 mm, plus chip conveyor, filter extraction, documentation and CDs. Additional technical specifications: • Bed inclination: 45° • Bed diameter: 700 mm • max. slide diameter V1 to V3: 500 mm • in the front workpiece diameter: 320 mm • centre length: 1450 mm • Travel Z3-axis: 1200 mm • Spindle height axis to floor: 1043 mm • Drawbar diameter: 81 mm • Front bearing diameter: 130 mm • Resolution axis C1: 0.001° • max. weight between centers: 500 kg • Distance between two spindle noses: 1495 mm • Z1 axis travel: 1200 mm • max. workpiece length: 1140 mm • max. workpiece diameter: 450 mm • Bar capacity of sub-spindle: 50 mm • Bore diameter o ...

The machine is equipped with a tailstock, revolving steady rest, a 14-position tool turret, incl. the tool holders visible in the photos in the turret, as well as a three-jaw chuck from the manufacturer SMW, diameter: 315 mm and incl. an additional steady rest as well as chip conveyor Additional technical specifications: • nominal current: 207 A • control voltage: 220 V

The machine is equipped with a tailstock and a 12-station tool turret, incl. the tool holders located in the changer, plus a 3-jaw chuck SMW AUTOBLOK, diameter: 300 mm, incl. chip conveyor and filter extraction system as well as documentation. Additional technical specifications: • frequency: 50/60 Hz • Diameter in the front bearing: 140 mm • Feed drive in X and Z-axis: 40 x 10 mm • Feed forces X/Z: 7.5 kN • Y-axis feed force: 7000 N • rapid traverse of C1-axis: 100 m/min • Position measuring system X/Y/Z: absolute rotating • Positioning uncertainty X: 0.008 mm • Positioning uncertainty Z: 0.010 mm • Working area axis distance: 1150 mm • Swivel range over X slide: 465 mm • Swivel range over bed: max. 680 mm

Additional technical specifications: • Center distance over bed: 120 mm • Center distance over support: 60 mm

Additional technical specifications: • Center height over support: 80 mm • Center height over bed: 150 mm • Center Length: 450 mm

• nominal voltage: 80 A • spindle internal diameter: 85 mm • incl. chip conveyor

HARDINGE COBRA 42 ist eine CNC Drehmaschine für präzise, hochgenaue und zuverlässige Bearbeitung. Kapazitäten: Dreh-Ø über Bett 210 mm, Stangen-Ø 42 mm, Drehlänge/Z 355,6 mm, X 196,8 mm; Revolver 1×12, Camlock A2-5. Daten: 100–5000 t/min; Eilgang X=10 Z=16 m/min; Spindel 14 kW; 50 Hz 3×400 V; 24 kVA. Zubehör: 3-Backenfutter, Spannzangensatz, Stahlhalter. Für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhren, Maschinenbau. Technische Daten ohne Gewähr

WFL M 35 G MILLTURN ist ein CNC Dreh-Fräs-Bohrcenter hoher Präzision, Genauigkeit und Zuverlässigkeit. Leistungsdaten: Spitzenweite 2000 mm, Dreh-Ø max 520 mm, Spindelbohrung 77 mm; Verfahrwege Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Technische Daten: Hauptspindeln bis 4000 min-1, 29/33 kW (551/630 Nm), angetriebene Werkzeuge 6/13 kW, Frässpindel 9000 min-1 15/20 kW (165 Nm); Eilgänge Z 40 m/min X 30/10 m/min; Gewicht ~20000 kg; Abmessungen 7900×5700×3250 mm. Ausstattung: Lampe, Kühleinrichtung, Papierfilter, Ölnebelabsaugung, Späneförderer, automatische Be-/Entladung, Messsystem Renishaw. Für enge Toleranzen, Anwendungen in Automotive, Luftfahrt, Medizintechnik, Uhrenfertigung und Maschinenbau. Technische Daten ohne Gewähr

Shaft 10/12 mm; with Widia insert; Contents of 4 drawers Auction-ID: A1-49785-297

Includes insert milling; unused and in original packaging Auction-ID: A1-49785-318

Shaft 20/25 mm; unused and in original packaging Auction-ID: A1-49785-295

For ISO turntables; unused and in original packaging Auction-ID: A1-49785-215

For ISO turntables, including CNMG12/ VBMT16; various slot, parting holders; approximately 45 pieces in total Auction-ID: A1-49785-95

Internal and external; unused and in original packaging Auction-ID: A1-49785-130

For internal, external; including VBMT11 and VCMT16; unused and in original packaging Auction-ID: A1-49785-185

For ISO turntables; unused and in original packaging Auction-ID: A1-49785-174

4 pieces PCLNL3225P12T for CNM61204/ 5 pieces PCLNL2525M16T for CNMG61606; unused and in original packaging; Including matching inserts Auction-ID: A1-49785-251

Shaft 32 mm; including with direct cooling; Includes 20 matching inserts CNM1906 Auction-ID: A1-49785-213

For insert VCMT16/ DNM11, and so on; unused and in original packaging Auction-ID: A1-49785-245

Shaft 20 to 40 mm; for ISO turntables; approx. 32 pieces Auction-ID: A1-49785-283

Includes 100 Ceratizit matching SNMM1906 type inserts Auction-ID: A1-49785-207

11 pieces with shaft 25 mm; 9 pieces with shaft 32 mm; for ISO turntables; unused and in original packaging Auction-ID: A1-49785-182

Includes holders; unused and in original packaging Auction-ID: A1-49785-332

Equipped with widia point; mainly shaft 20/25 mm; lying in 7 drawers Auction-ID: A1-49785-278

Reference DDJNL2525M15; for insert DNM15; unused and in original packaging Auction-ID: A1-49785-133

Mainly shaft 25/32 mm; for ISO turntables Auction-ID: A1-49785-286

Shaft 20 to 40 mm; for ISO turntables; approximately 34 pieces; Includes Lista insertion trays Auction-ID: A1-49785-282

Including matching inserts; in 2 cardboard boxes Auction-ID: A1-49785-250

For internal, external; Includes 2 x bare tool with diameter 71 x 220 mm; unused and in original packaging Auction-ID: A1-49785-184

Shaft 40 mm; for ISO turntable SNM25; unused and in original packaging Auction-ID: A1-49785-237

8 pieces with shaft 12 mm; 12 pieces with shaft 16 mm; unused and in original packaging Auction-ID: A1-49785-151

Includes 150 Ceratizit matching DNMG150408 inserts Auction-ID: A1-49785-206

Shaft 25 mm; 4 pieces SDJCR for DVMT11T3 ; 4 pieces SVVBN; 8 pieces of SVJBR; for VBMT1604; unused and in original packaging Auction-ID: A1-49785-223

Including 150 matching turntables WNMG080412/ unused and in original packaging Auction-ID: A1-49785-25

4 pieces internally, 4 pieces externally, 8 pieces externally with direct cooling; For ISO turntables Auction-ID: A1-49785-179

Including CNMG12/ DNMG15 Auction-ID: A1-49785-26

Shaft 40 mm; Includes 30 matching Sandvik CNM1906 insert Auction-ID: A1-49785-238

For ISO turntables/ shank 20 to 40 mm/ total 15 pieces; unused and in original packaging Auction-ID: A1-49785-257