bar turning used for sale

Key data: 1010 mm, 3000 mm

Cycle lathe Seiger SLZ 1000 Year of construction 2009 Cycle lathe Seiger SLZ 1000 Year of construction 2009 Center width 3000mm Circulation over bed 1010 Circulation via face slide 650 Drive at 100% ED 37KW at 60/ ED 52KW Max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z Feed force max 16000N Control Heidenhain Manual Turn with face plate and steady rest The offer is aimed exclusively at tradespeople within the meaning of §14 BGB

CMZ TTL-66-66-T1Y-T2Y+GL20II CNC Lathe GENERAL Project No.: 905769 Quantity: 1 pcs. Manufacturer: CMZ Type: TTL-66-66-T1Y-T2Y+GL20II Control: Fanuc 31i B Year of Make: 2021 Condition: Used machine Approx (hrs): 9050 DESCRIPTION TURN Max. turning diameter 220 mm Max. workpiece length 614 mm Max. circumferential diameter over bed cover 240 mm Max. chuck diameter 210 mm Max. distance between the two spindle lugs 800 mm Max. speed main spindle 4000 1/min Max. power main spindle at ED 10-40/100% 35.5/23.5 kW Max. torque main spindle at ED 10-40/100% 205/150 Nm Spindle aperture main spindle 72.5/66 mm Spindle diameter in the front bearing main spindle 110 mm Spindle flange size main spindle ASA 6 A2 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Stop device in the main spindle Coolant supply through the main spindle Max. s ...

Parallel Lathe WABECO D6000E Between points: 600 mm Maxi Ø on bench: 270 mm Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg

Inv. Num. : 8559 Type: WDR 1000 CNC Producer: Wagner Created: 2011 Parameters: Control system: Siemens 840D Maximum turning length: 5000 mm Maximum turning diameter over bed: 750 mm Maximum turning diameter over support: 666 mm

: 0583 mm : 1710 mm : : 82 mm : 436 mm : 2500 U/min : A1-8 DIN 55026 : 100 mm : 235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NC Lathe Gildemeister Nef 500 BJ 1996

DMG MORI CTX Beta 2000 CNC turning center was built in 2020 in Italy by Graziano Tortona S.r.l.. This extremely efficient machine is offered together with an extensive range of equipment, which significantly expands the machining capabilities and guarantees the achievement of high repeatability of the manufactured parts. Thanks to additional function packages, it is possible to perform, e.g. precise gear milling or polygon turning. All machining processes are performed inside a large working area by means of a reliable spindle and cutting tools taken from a 12-position turret. The tailstock coupled to the Z-axis moves collision-free on separate sliding guides, mounted on a bed of high thermal stability. This bed is excellent at reducing the influence of heat, while increasing the life of all components and tools. Over its service life, the machine has worked for a total of 6219 hours. ...

weight of the machine ca.: 3,9 t : 50 control: Fanuc changer: 6 fach centre distance: 1500 mm spindle bore: 80 mm available since 22th of september: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.

Key data: 465 mm, 1050 mm, 3500 1/min

Specifications: Manufacturer: Gildemeister Type: CTX 510 Year of Make: 2006 Control: Siemens 840D ShopTurn Travel distances: X 300 mm, Z 1,050 mm Working spindle Speed: 3,500 rpm Spindle bore: 95 mm Rotary diameter: 465 mm Deh length: 1,050 mm Tool/movement Tool turret: 12-speed Tool holder: VDI 40 Circumferential diameter: 680 mm Dimensions and weight Weight: 7,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tailstock Conveyor automatic door Three-jaw chuck 315

Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS

Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck

control: SIEMENS 840D SL ShopTurn turning diameter: 700 mm swing over bed: 900 mm turning length: 3065 mm c-axis: indexing: 0.001 ° turning speeds: -2500 U/min tool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mm rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 30 m/min Overall size: 4450x2100x2350 mm rapid traverse Z-axis: m/min weight of the machine ca.: 7200 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor

Klaaßen SDM15-5 turning machining centre, The top lathe we offer has the following in the basic configuration Technical parameters: ▪ SDM 4-5 CNC 4-Panel Bed Precision Lathe - Z-travel (slide longitudinal)= 5,000 mm (6,000 with TAE3) X-travel (face slide transverse)= 1,000 mm Y-axis (vertical movement)= 350 mm Maximum workpiece Ø = 1,500 mm Circulation diameter over face slide = 1,500 mm - Center width = 4,500 mm (5,500 with TAE3) ▪ CNC machine designed as a 4-lane tip lathe with full drive-over of the Bezels and superstructures - - - Cross slides and face slides restrict the diameter range by lateral arrangement on the lathe bed. As a result, there is no accompanying Diameter restriction above the face slide/tool carrier. Cross slide unit can be fully attached to the steady rests, HSSL and tailstock. This significantly reduces the set-u ...

Key data: 6300 mm, 11200 mm, 4800 mm

Completely retrofitted Single Column Vertical Turning Lathe Blansko model SKSJ 1A equipped with one vertical head for turning and milling operations Technical characteristics: Face plate diameter 6300 mm Max. swing with moved out arm 11200 mm Maximum height of the workpiece 4800mm Max. turning diameter with column near the faceplate 8000mm Max. diameter of work piece clamped on floor grid (for internal processing) 14700mm Infinitely variable rotation of the faceplate 0.5 – 20rpm Max. work piece weight 100ton Milling spindle max. speed : 1000rpm 2 speed gear box with 15KW Siemens motor Manual clamping ISO 60 taper tool The machine was completely retrofitted during 2024-2025 and supplied wi ...

weight of the machine ca.: 6,6 t control: monforts control : 2 centre distance: 3010 mm centre height: 310 mm tail stock: ja cooling: ja dimensions of the machine ca.: 5000-1600 mmxmmxmm spindle bore: 70 mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details shown on picture. Parts shown by hand not come.

Control: OSP-P200LA Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travel: Z-axis 700 mm W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) Equipment: - 2 tool turrets with 16 slots each (all seats driven) - Touchsetter - IGF - -Conveyor - Bar loading magazine 3.00 m - Main spindle collet chuck - Sub-spindle three-jaw chuck - Parts catcher - Workpiece removal system -Aspirator - Coolant system with high-pressure pump, paper belt filter system

Mazak Integrex 200 Y, 20 tool positions, x,y,z = 530,140,1065. 30 kW spindle motor, 35-4500 rpm, chuck size 210 mm, through-hole diameter 61 mm, under power

Specifications: Workspace: Max. circumferential diameter: 680 mm Circumferential diameter via X-guide: 565 mm Chuck diameter: 250 / 315 mm Plane stroke (X): 315 mm Longitudinal stroke (Y): 1350 mm Spindle box: Spindle diameter in the front bearing: 150 mm Spindle bore: 107 mm Main Drive: Power of the three-phase main drive: 36 / 45 kW Torque (100% ED / 40% ED): 600 / 750 Nm Speed range (100% ED): 20 - 3200 rpm Speed range (40% ED): 20 - 4000 rpm Tool carrier: Number of tool stations: 12 Cylindrical shank diameter: 50 mm Switching time 30°: 0.16 sec. Tailstock: Tailstock, travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill holder: MK 5 Coolant Facility: Content: approx. 220 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, ...

Inv. Num. : 8638 Type: SPU 20 Producer: MAS Created: 1995 Parameters: Control system: Siemens Maximum turning length: 700 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 380 mm

MAchine is in good working condition.

turning length: 3.000 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Lathe CNC turning center with 2 spindles Emco Hyperturn 45 Year of manufacture 2018 Switch-on hours: 25,386 h Ready for operation (automatic mode): 17,035 h Production operation: 8,619 h Original price: 270.000,- € net Current leasing rate: 2,629 € Chip conveyor Bürener SPE 63/12-225 Year of construction 2018 Bar loading magazine TOP Automazioni ETL8-50 12-speed tool turret Powered tools on both turrets Y-axis Automation with EMCO bar feeders, swivel loaders or gantry loaders EMCONNECT - Digital Process Assistant (Sinumerik ONE) WORKSPACE Travel in X/Y/Z 160 (150)/70/510 mm Max. bar passage 45 (51) mm Max. turning diameter 300 mm Circumferential diameter over bed 430 mm Rapid traverse speed X/Y/Z 30/15/45 m/min MAIN SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. torque 100 Nm SUB-SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. t ...

Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min

Weibert DB 1050 Pro Vario Lathe Turning diameter 794 mm Tip height 397 mm Center width 1016 mm Speeds: 20- 3850 min-1 Konuse MK 2 Spindle Head Thread M33 2.2 KW 50 HZ 230 V Right - Counterclockwise Length 1700mm Height 1300 Weight 250kg Scope of delivery: Tool support 300 mm Increase in tool support Face Plate 80 mm Four-pronged drivers Grain Punches long ejection rod Short ejection rod 2 x tension wrenches 46mm / 38mm Tension wrench 8mm / 10mm Tension wrench 17mm / 19mm Allen key (2.5mm, 3mm, 4mm, 5mm. 8mm, 10mm)

Gurutzpe B1800/3 CNC Lathe Fanuc Oi-TD CNC Control, 52” Swing Over Bed, 372” Between Centers, 36” Cushman 4-Jaw Independent Chuck, 41” Swing Over Carraige, Spindle Speeds 1-300 RPM, 4.33” Spindle Bore, Sauter 4-Position Turret, 48,400 Lbs. Weight Capacity (Unsupported), 70,500 Lbs. Weight Capacity (2 Steadies), Hydraulic Tailstock, (3) Roller-Type Steady Rests, Full Length Scale on Z-Axis, Hennig Chip Conveyor [CNC Retrofit 2010]

CNC Lathe Manufacturer: Gildemeister Type: CTX 420 linear V3 Year of Make: 2003 Control: Heidenhain Plus IT Circumferential diameter over bed: 680 mm Circumferential diameter over face slide: 565 mm Plan travel: 260 mm Longitudinal travel: 635 mm Drive power: 40/ 100% 25/37 kW Speed range from – to: 20 – 5000 rpm Weight approx.: 6500 Kg Equipment: Driven tools: 12 stations Tool carrier: 12-cavity Sauter revolver VDI 30 Partial hollow clamps Tailstock Quill stroke automatic Quill holder: Mk 5 Conveyor Measuring arm Oil mist extraction Errors excepted

Inv. Num. : 8680 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Table diameter: 260 mm Feed length X-axis: 680 mm Feed length Z-axis: 200 mm Maximum turning length: 100 mm Max. turning diameter: 250 mm Maximum workpiece weight: 40 kg Motor power: 35 kW Length: 3800 mm Width: 2100 mm Height: 2400 mm Weight: 7500 kg Equipment: Chip conveyor

Inv. Num. : 8679 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Feed length X-axis: 570 mm Feed length Z-axis: 200 mm Max. turning diameter: 220 mm Maximum workpiece weight: 120 kg Maximum spindle speed: 4500 1/min Max. workpiece height: 110 mm Weight: 6500 kg Equipment: Turret with Leiftool drive Chip conveyor

The machine is in good technical condition, testing possible after prior agreement. including a new chip remover

Key data: 680 mm, 1300 mm, 4000 1/min

Year of construction 2003 Spindle Hours 11600 Siemens Control 810D max. circulation 680 mm Circulation via X-guide 565 mm Longitudinal travel 1300 mm Planweg mm 315 Spindle head h5 Spindle diameter in front bearing 150 mm Spindle bore 107 mm Chuck diameter 315 mm max. torque 600 Nm Spindle speed 4000 rpm Rapid traverse X-axis 60 m/min Rapid traverse Z-axis 45 m/min Tool carrier for 12 tools Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Dimensions of the machine with chip conveyor L/W/H 570/2600/2210 mm Machine weight approx. 10000 kg Accessories: Bezel clamping range 30-245 mm Conveyor Lathe chuck

Turning diameter over bed (mm) 365 Turning length (mm) 1000 Spindle bore (mm) 42.5 Max. rotary diameter over carriage (mm) 205 R.P.M. / Speed 38 - 1600 (16x) Accessories: Digital display 2 axes 3 B. chuck 250 mm, 4. B. chuck 200 mm, documentation and Multifix steel holder

turning length: 1.300 mm spindle diameter: 120 mm spindle bore: 38 mm control: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter via support 135 / 270 mm - Center width 1000 mm - Spindle bore 52 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - Feeds longitudinal + flat - Metric Threads / Withworth Threads / Module Threads / DP Threads - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center punch, new Multifix size B with 3 inserts

Guide and tension spindle lathe Lathe Lathe Weisser Heilbronn Junior Heidenhain Control with cabin incl. oil pan Last test 05/2025 (see picture) The machine is in perfect condition and can be delivered nationwide for € 350. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...

HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Lathe Saeilo TUR 630 MN 3000

Inv. Num. : 8708 Type: GENOS L3000-e Producer: OKUMA Created: 2021 Parameters: Switch-on hours: 7963 h Hours: 4206 h Maximum turning length: 500 mm Max. turning diameter: 300 mm Maximum main spindle power: 22 kW Maximum spindle speed: 3800 1/min Number of all tools: 12 pieces Weight: 7700 kg Equipment: C-axis Y-axis CNC tailstock Tool probe Powered tools VDI Holder Powered Tool Holders (5 pieces)

turning diameter: 950 / 650 mm turning length: 2000 / 2500 mm control: HEIDENHAIN Manual Plus 3-jaw-chuck diameter: 800 mm turning speed range: 40 - 1000 U/min total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 8 x 3 x 3,5 m 12 x station Turret Tailstock 2 x Chip Conveyors Price EXW 17036 Neubrandenburg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 190 mm turning length: 620 mm control: Fanuc Series 18i-TB total power requirement: 15 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: 5350X3350x2395 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 320 / 270 mm workpiece length - max.: 620 mm control: Mazatrol Smooth swing diameter: 300 / 172 mm workpiece weight: kg ------------ MAIN SPINDLE ------------: turning speeds: 5000 U/min passage of spindle: 76 mm c-axis: 0,0001 spindle motor: 15 / 11 kW spindle nose: A2-6 travel -x axis: 175 / 111 mm travel -y axis: 100 / 70 mm travel -z axis: 520 / 580 mm rapid travel x/y/z: 30 / 26 / 40 m/min 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW spindle nose: A2-5 spindle passage: 61 mm w-axis: 625 mm bar capacity: 65 mm total power requirement: 39,2 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 2,87 x 2,3 x 2,4 m Highly efficient CNC turning centre with 2 turrets / 2 spindles for driven tools and long Y-axis travel - Smooth CNC control - Main & counter spindle - 2 tool turrets -- 12-station tool turret (2x) -- Spindl ...

DMG MORI NEF 400 CNC turning center was built in 2009 in Poland by FAMOT Pleszew S.A. The machine, distinguished by its compact design and high efficiency, is used for precision machining of workpieces with a maximum diameter of 350 mm. The machining process is performed inside a fully illuminated workspace by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. The extremely rigid design eliminates any vibration and oscillation, ensuring maximum process stability during even the most intense challenges. All these features make the DMG NEF 400 the best choice for any industrial plant. The GILDEMEISTER NEF 400 CNC lathe was used for prototyping and worked for a total of 6492 hours. The offer also includes extensive equipment, consisting of, among others, an advanced HEIDENHAIN CNC control, driven tools and a chip conveyor. Technical specificatio ...

Key data: 310 mm, 520 mm

Type of machine : CNC turning and milling center Manufacturer : EMCO Type EmcoTurn E65 Year of manufacture 2007 Control system Sinumerik 840 T Siemens Storage location : Hultfred / Sweden Switch-on hours : 46,000 h Automatic operation : 25,500 h Country of origin: Austria Delivery time end of May 2024 Cargo base free truck loaded Technical description Travel: X-axis : 210 mm Z-axis : 610 mm C-Axis : 360° Max. swing diameter over bed : 540 mm Max. swing diameter over face slide: 360 mm Max. turning diameter : 310 mm Max. turning length: 520 mm max. rod diameter 65 mm Center width: 650 mm Main spindle: Speed range - main spindle 60 - 4,200 rpm/-1 Drive power - main spindle 18 / 15 kW Max. torque 192 Nm Spindle head DIN 55026 / KK6 C-axis 0.001 ° Tool turret: 12 positions Tool holder VDI 30 DIN 69880  ...

Key data: 500 mm, 744 mm

CNC turning-milling center with swivel spindle With this equipment, hardly anything is left to be desired Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens 840 Year of manufacture : 2006 Duty cycle hours : 56000 h Spindle hours : 22722 h Availability : from stock Hultsfred / Sweden , to be visited under power Video : ww.youtu.be/Mgqd\_Lq2ciM?si=eO0RL1\_Bq2Wie-h4 Specifications Working range circulating diameter over bed : 600 mm Circumferential diameter over face slide : 500 mm Distance between the two spindle lugs : 975 mm Max. turning diameter :430 mm Max. part length : 744 mm Max. rod diameter : 65 (76.2) mm Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Drive power main sp ...

Key data: 380 mm, 650 mm, 3000 1/min

CNC lathe with driven tool stations Manufacturer : Biglia Model : B 658 MB CNC Control: FANUC Series 18i-TB Year of manufacture : 2004 Condition : good , fully functional Location : Hultsfred -Sweden Availability : in stock Specifications Maximum turning diameter: 380 mm Maximum rod diameter: 80 mm Maximum passage: 620 mm Maximum turning length: 650 mm Feed in the X/Z/B axis: 220/650/660 mm Rapid traverse in the X/Z/B axis: 20/24/12 m/min Spindle speed: 30-3000 rpm Spindle bore diameter: 90 mm Spindle tip height: 1055 mm Inner diameter of the front bearing: 130 mm Spindle End: ASA 8" Spindle drive power: 26/22 kW Diameter of the lathe chuck: 315 mm 12-position bidirectional turret Outer lathe chisel shank: 25×25 mm Shaft of the internal turning tool: ⌀ 40 mm Indexing of the turret (by 1 position): 0.1 s Driven tool stations 12 positions Max. speed driven ...

DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM