bar straightener used for sale

Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm -Thread: M12/1.5 mm -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Terminal boxes, aluminum housings, housing systems, Klippon -Type: 07-5107 -EX: protected Price: per piece -Quantity: 7x Available -Weight: 0.4 kg

hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

- 10-STATION HORIZONTAL AXIS ROTARY TABLE, - bar max. Ø 60 mm;, - workpiece length max. 220 mm., - barr length max. 6.000 mm

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used autoclave by Steriflow BarriQuand. New 1987. UDT valid until 2026. 4 baskets. 2 pieces available.

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

NEW! Barth Novo Cito roaster Built in 1959, never unpacked and assembled. 5 kg roaster Barth Novo Cito in TOP condition Location: Germany, Ruhr area, near Oberhausen

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Tetra Pak TA 20 homogeniser is a type of machinery used in the food and beverage industry, primarily for the homogenization process of liquid products. Homogenization is a mechanical process that breaks down fat globules in liquid products to create a uniform and stable emulsion. This process is crucial in the production of products like milk, cream, and fruit juices, improving their texture, stability, and mouthfeel., Key Features of the Tetra Pak TA 20 Homogeniser:, - Design and Capacity: The TA 20 is designed for medium-scale production, capable of handling various flow rates depending on the application. It typically supports a wide range of products., - Versatility: This homogeniser can be used for a variety of dairy and non-dairy applications, including milk, cream, yogurt, beverages, and sauces., - High Efficiency: It offers efficient homogenization with adjustable pressure se ...

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

Glass Filler, Bottle Filler, Beer Filler, Pressure Filler, Isobaric, Manufacturer: Kosme-Krones, Type: Barifill FC 30-6, Year of manufacture: 2015, Capacity 7,000 - 8,000 bottles / hour, set up at 0.33 - 0.50, 330ml - 500ml, 33cl - 050cl, 26 mm crown cork, Siemens S7, vacuum pump, operating hours: 18,412 hours. Glass Bottle Filler, Beer filler, Counter pressure, Isobaric, Made by Kosme Krones, Type: Barifill 30-6, Year: 2015, Capacity 7.000 - 8.000 bph, adjusted to 0,33 - 0,50, 330ml - 500ml, 33cl - 050cl, 26 mm crown cork, Siemens S7, vacuum pump.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1994 1 pipe reactive law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13.0 bar Increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control section, control cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2000 equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Make : LOOS; Gunzenhausen Type : U-HD Heating surface approx. : 31 m² Power max. : 2.000 kg/h most permissible. Operating overpressure : 10 bar Increased test pressure : 18 bar Water content at NW approx. : 1.740 l Water content full approx. : 2.480 l Year of construction : 1999 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, water level sight glass, steam and safety valve and the existing coarse and fine fittings

1 gebr. Boiler ---------------------------------- - mounted on frames - Manufacturer : Jumey Heating surface approx. Taxi: 40 m² Capacity : 2,000 kg/h Operating overpressure max. : 10.0 bar Previously operated with : 5.0 bar Water capacity at NW approx. : 3,540 l Water content full approx. : 4.750 l Year of construction : 1994 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, and the existing coarse and fine fittings.

Manufacturer: Bargstedt, Type: Winkelübersetzer, Control: no, Angular transfer: yes, Work piece width min-max mm: 1050, Min.-max. workpiece length in mm: 2500, Working length max mm: Länge Rollbahn 5300, Feeding speed max m/min: ca. 10-30, Feeding speed continous adjustable: möglich, Aushebestationen: Rechenaushebung Teilung 150/länge Rechen 2600 mm mm, Roller width in mm: 850, roller diameter mm: 60, Working hight mm: 920, Lift out roll system: Schiene, FREE TEXT: 2 Motore Antrieb Rolle/1 Motor Querübergabe,

Manufacturer: Bargtsedt Transportrollengang Schrägrollengang, Working length mm: 2940, Working widht mm: 1080, Total power kW: 1.5, Durchmesser Rolle mm: 70, Rollenmittenabstand: 140, angetrieben über Rundriemen: yes, Stop straightedge: yes, Anschlagkante Höhenverstellbar: yes, Total hight mm: 940, Feeding speed continous adjustable: yes über Umrichter möglich, FREE TEXT: 2 Antriebe und pneumatische Klappschiene für Vereinzelung/,

used Bear / Bär Varimixer AR60/MK1, planetary mixer, overhauled, 60 litres, with boilers and 2 tools, 1.9 kW, 4.9 A, 50 Hz, 400 V, machine no. 60001933

Manufacturer: 4 Stück Spehoma Transportbänder ca. 4500 mm 600 mm, Type: Transportband, Year: ca. 2000, Control: hand, Working length mm: ca.4000, Working widht mm: 600, UV-Band: 950 Verstellbar, Total hight mm: 1,5, UV conveyor belt: 8-20, Frequency converter: yes, Own controller: no, Bandsteuerung : yes, Year :ca. 2000

Manufacturer: Bargstedt Querabstapelanleg, Type: TSH 500 Q/, Year: 1999, Control: Bargstedt, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 280-2500, Min.-max. workpiece height in mm: 12-40, Vacuum feeding: yes, Crosswise feeding: yes, Stacking pattern, single-row: yes, Number of stacks: 2, Stack height in mm: 1600, Cycles approx.: ca.15, Removal of protective boards: j, Erection in a pit: no, Year :1999

Key data: 90 , 40 , 510

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Bargstedt Abstapelanlage, Type: TSH 500/Q/30/12S, Year: 2005, Control: Homag, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 280-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stacking pattern, single-row: yes, Stacking pattern, double-row: yes, Number of stacks: 2, Stack height in mm: 1600, Removal of protective boards: yes, Erection in a pit: no, Year :2005

Manufacturer: Baberan, Type: LP 1400, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 10-60, Feeding speed min-max m/min: 10-40, Destacking plant: no, Stacking plant: no, Brushing machine: yes, Casein glue plant: yes, Brushing machine: yes, Roller diameter mm: ca.400, Lamination calender: yes, Press calender: yes, Roller diameter mm: ca.400, Rollers heated: yes, Heating medium thermal oil: yes, at top and bottom: yes,

Manufacturer: Bargstedt Aufstapelgerät, Type: TSP 15 D, Year: 1995, Control: Homag, Stacking device: yes, Work piece length min mm: 400-2500, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 400-2500, Min.-max. workpiece height in mm: 10-40, Stack height in mm: ca.900, Stack arrangement: mehrlagig, Workpiece weight/stack position in kg: ca.100, Inlet roller conveyor mm: yes, Outlet roller conveyor mm: no, Cycles approx.: ca.15, Feeding speed max m/min: 5-40, FREE TEXT: inkl Schaltschrank ohne Auslaufrollebahn, Year :1995

Manufacturer: Bartling, Type: Späneventilator, Year: ca.2008, Diameter intake mm: 400, Engine power kW: ca.18,5, Flow rate approx. m3/h: ca.8500, rotations rpm: 2850, Direkt drive: no, V-belt drive motor: yes, Enclosed impeller: yes, Outlet side mm: 400, Year :ca.2008

Manufacturer: Bargstedt , Type: TFU 02, Year: 1995, Conveyor belts Qty: 2, Conveyor belt 1 mm: 7000, Conveyor belt 2 mm: 3000, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-60, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: yes, Luftkissentisch pneumatisch: yes, Drain roller operation: 1300, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-60, Feeding speed max m/min: 10-30, Year :1995

Manufacturer: Baberan Kaschieranlage, Type: ECO Line 1400 DSI, Year: 2006, Work piece width min-max mm: 250-1350, Min.-max. workpiece length in mm: 450, Min.-max. workpiece height in mm: 6-40, Working widht max mm: 1350, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Urea plant: yes, Brushing machine: yes, IR zone: yes, Hardener machine: yes, Leimauftragsmaschine : 2, Double-sided: yes, Roller diameter mm: ca.300, Lamination calender: 2 Stück, Diameter of lamination calender in mm: ca.400, Roller diameter mm: ca.300, Rollers heated: yes, Year :2006

Manufacturer: Barberan, Type: HOK-C-1-1400, Year: 2012, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1330, Number of lamps: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Feedin speed m/min: 10-20, Year :2012

Manufacturer: Bargstedt, Type: Transportband, Year: ca1995, Control: hand, Working length mm: 6500, Working widht mm: 800, Total hight mm: 950 Verstellbar, Engine power kW: 1,5, Feeding speed max m/min: 8-20, Feeding speed continous adjustable: yes, Belt control: no, Working hight adjustable mm: yes, Year :ca1995

feed pressure: 10.0 bar Effective free air delivery: 700 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 397 kg. total power requirement: 5.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bargstedt, Type: PWH 21/ER/25/10, Year: 1992, Control: Programm, Work piece length max mm: 2500, Work piece length min mm: 300, Werkstückbreite max mm: 1000, Number of stacks: 2, Taktleistung ca.: 15, Compressed air bar: 6, Total power kW: 30, Number of sucking lines: 8, Feeding speed max m/min: 10-50, Feeding speed continous adjustable: yes, Protective panel feeding: no, Erection in a pit: no, Year :1992

feed pressure: 10.0 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15.0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 bar Effective free air delivery: 1.000 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 410 kg. total power requirement: 7.5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 pcs. Lifting beams Load capacity 57.5 t each. Total length each 6000 mm with 4 shackles each

Electric motors without gearbox (low-speed motors) ideal for generating electricity for hydropower or wind power Data sheets are available! Please contact us

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.

12 WINDERS, BARMAG CRAFT WINDERS CW6-1200/ 6 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm