bar straightener used for sale

Pressure gauge GAUGE PLANT BEIERFELD 1/FM20/2 0 - 60 MPa (0 - 60 bar) TGL16374 Accuracy class: 0.6 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New !' Dimensions: 200 x 160 x 55 mm

L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For middle sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-L PRO-Version - Technical specifications: 220V, 4kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-500)xW(100-400)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1765xW810xH975 | weight (net/gross): 150-200kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic ma ...

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 0.6 kp/cm² (0 - 0.6 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New ! Dimensions(Single Pressure Gauge): 138 x 100 x 48mm Dimensions(Packing): 140 x 105 x 105 mm

Economical L-Sealer for wrapping large sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.5kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L750xW600xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1800xW855xH1100 | weight (net/gross): 135/185kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note  ...

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 25 kp/cm² (0 - 25 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48 mm Dimensions(Packing): 140 x 105 x 105 mm

L-Sealer for shrink wrap packaging, for very large sized product, semi-automatic (manual infeed of product, automatic outfeed) with pneumatic closing mechanism of L-bar sealer. Suitable to be combined with SHRINKtunnel POF-XXL. - Technical specifications: 220V, 2.0kW | compressed air: 5.5bar, 0.1m? | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L900xW600xH300 (can be varied on demand) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions depending on actual packaging size required | weight (net/gross): 210/250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the  ...

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 40 kp/cm² (0 - 40 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New ! Dimensions(Single Pressure Gauge): 138 x 100 x 48mm Dimensions(Packing): 140 x 105 x 105 mm

Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L450xW400xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1560xW760xH1040 | weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 1.6 kp/cm² (0 - 1.6 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48mm Dimensions(Packing): 140 x 105 x 105 mm

Max stock diameter 20 mm Number of tool stations 30 Spindle speed 10.000 rpm Main Spindle Axes 4 Back Spindle Axes 4

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 1.0 kp/cm² (0 - 1.0 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48 mm Dimensions(Packing): 140 x 105 x 105 mm

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 4 kp/cm² (0 - 4 bar) ) Switch Type: 2/Z102-1 Switching Capacity: 220V AC/DC 30W(VA) Housing Diameter: Ø 160mm Accuracy Class: 2,2,000V AC/DC 5 flange diameter: Ø 160 mm with protective membrane ! New ! Dimensions: 220 x 210 mm

Vacuum Gauge, Diaphragm Vacuum Gauge, Direct Reading HIGH VACUUM DRESDEN Type 20.5 0 - 600 Torr (0 - 0.8 bar) Body diameter: Ø 140 mm Flange diameter: Ø 39.5 mm Pipe inner diameter: Ø 23.4 mm New ! Dimensions: 140 x 135 x 140 mm

Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 16 kp/cm² (0 - 16 bar) Switch Type: 2/Z112-1 Switching Capacity: 220 V AC / DC 30 W (VA) Housing Diameter: Ø 160 mm Accuracy Class: 1 Connection Thread: M20 x 1.5 New ! Dimensions: 210 x 205 x 150 mm

Test manometer with test valve MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 1,0 - 1,0 6 kp/cm² (0 - 1.6 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Test manometer with test valve MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 2,0 - 2,0 5 kp/cm² (0 - 2.5 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Pressure gauge MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 16 kp/cm² (0 - 16 bar) TGL16374 Accuracy class: 0,6 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Stock number: PM1553, Excentric screw barrel pump, stainless steel,, Flux, 1,1 kW motor, 900 rpm., 220/380 Volt., Bar Ø 50 x L 1000 mm., Material: Stainless steel AISI 304

Contact pressure gauge, pressure gauge with switching contacts MANOMETERWERK WITTGENSDORF 0 - 600 kPa (0 - 6 bar) Switch type: 2/Z112-1 Switching capacity: 220 V AC / DC 30 W (VA) Housing diameter: Ø 160 mm Accuracy class: 1 Connection thread: M20 x 1,1,01 5 New !' Dimensions: 210 x 205 x 150 mm

Contact pressure gauge, pressure gauge with switching contact WIKA 212.20.100 Cont. 821.111 0 to 250 bar Ø 100 mm with diaphragm seal (approx. 1500 mm cable) New! Dimensions: 120 x 60 x 55 mm

Stock number: P311, Barrel pump, stainless steel,, Lutz type Niro 40., Ex motor 220 volt,, 460 watt, 9100 rpm., Straw Ø 40 x L 900 mm.

Pressure regulator manually adjustable, ultrapure gas regulator DRUVA type: LMD-500-01 inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Stock number: P285, Barrel pump, stainless steel,, 18800 rpm. 220/380 V., Straw Ø 33 mm. x L 3025 mm., Material: Stainless steel AISI 304

Pressure regulator hand-adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262-242H283 inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

200 litre, Stock number: T3739, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 560 mm., Total height: 870 mm., Other: Strengthening ring and fastening band in the top

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

150 litre, Stock number: T3357, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 8 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 550 mm., Outer diameter: D 590 mm., Total height: 650 mm., Other: Strenthening ring in the top

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

200 litre, Stock number: T1690, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Barrel, Standing: On strengthening ring, Top: Open with lid, clamping fixture and strengthening ring, Inner diameter: Ø 560 mm., Total height: 825 mm.

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm

Bar Tensioning System - Post-Tensioning System DYWIDAG 4 pieces of post-tensioning systems for reinforcing steel Pressing force 60 tons for rod types up to WR 32 Piston stroke 50 mm Piston area 132.54 cm² Operating pressure max. 500 bar Length of the jack 401 mm Total weight of the 4 presses 160 kg

Hilger & Kern P80 Pump Basic version P80 Barrel size 80l Gear ratio (drive) 56:1 Flow rate (with 20 double lifts) l/min 0.61 Material Viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum container Ø outside mm 440 A single pump is included Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Z640 Mixed Lot (134 pieces) Feed Pliers Automatic Lathe Lathe Turning Center probably for Index Traub or Schütte or similar machines

Drum mixer for e.g. plastic granules or other Capacity 50kg (2 bags) granules + masterbatches Including approx. 18 usable barrels, 2 of which are made of metal

Manufacturer: SPINNER Model: SERVO - LOAD 80 - 1200 Year of Manufacture: 2011 Voltage (U): 3/PE ~ 400 V Frequency (f): 50/60 Hz Input Current (Iᵍ): 5 A Fuse Rating (Iₙ): 10 A Find more here - / Contact us at -

max rod Ø: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Speed: 23-4400 1/min 6-station turret 2 longitudinal slides 2 cross slides IEMCA Bar Feeder BOSS 432/32 max. bar length 3,200 mm

Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.

max rod Ø: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Speed: 23-4400 1/min 6-station turret 2 longitudinal slides 2 cross slides IEMCA Bar Feeder BOSS 432/32 max. bar length 3,200 mm

Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019 Features:

Ø 100, class 1.6 0 - 25 bar Version: Vertical Display range: 0 - 25 bar Scale graduation: 0.5 bar Materials: Housing 1.4571, measuring system and connection, viewing panel multi-layer safety glass Connection: 1/2'' bottom (AB) Plate spring pressure gauge

Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible.

multi spindle bar automatic, Mori Say 8/42 - YOM 2006, CONFIGURATION, - HIRTH coupling for drum locking, - 8 front slides and 8 radial slides, - 4 Compond slides in stations 1, 2, 5, 6, - CUCCHI Pietro bar loader (2007), - Bundle for CUCCHI BLT BUNDLE bar loader (2018), - Pick-up spindle, hydraulic in pos. 8, - preparation for oil fume extraction

- neu aufgebaut, neue Elektrik in 2018, - Schnecken-Späneförderer, - Ölnebelabsaugeinrichtung, - Kühlmittelfilter, selbstreinigend, - Doppelschlitten in Lage 6 zum Abstechen und Rückseitenbearbeitung, - Polygondreh- und Gewindefräseinrichtung Lage 4, - CNC-Kreuzschlitten AUTOR in Lage 5, - Abgreifspindel, hydraulisch in Lage 6, - Transportband für Fertigteile, - Stangenlader Iemca PRA

Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: CUCCHI BLT Typ MULTI F-6, Model AN / PB20, Version 3,3 M, Working hours: 1996

Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600

multi spindle bat automatic, GWM TECH S42-6 AC, automatic bar loader, Cucchi Pietro