bar lathe cnc used for sale

UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10

- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).

Silo 20 m³ volume with hook holder Payload 28 to, dead weight 2500 kg Diameter 2500 mm, height 6600 mm, outlet height 1100 mm Outlet NW 250 Blow-in line, vent line, inspection cover NW 500 Silo butterfly valve Footprints 2400 x 2500 mm Next Pressure Test 07/28

Pressure silo 29 m³ volume, payload 46 to, dead weight 3000 kg Diameter 2500 mm, height 8600 mm Spout height 1250 mm / 900 Ball valve DN 65 Inspection Cover NW 500 Blow-in line, vent line

Silo 12 m³ volume, payload 19 to, dead weight 1800 kg Silo diameter 2400 mm, height 5315 mm Spout height 1100 / 800 mm Outlet NW 250 Inspection Cover NW 500 Silo butterfly valve NW 250, pressure-tight Silospitz with ball valve DN 65 Blow-in line, vent line Hook mount

Pressure silo 3 m³ volume, payload 4800 kg, dead weight approx. 1200 kg Diameter 1750 mm, stand dimensions 1700 x 1720 mm, Spout height 1200 mm / 900 mm Outlet flap NW 250, silo tip with ball valve DN 65 Filling lid NW 450 in the silo roof, Inspection cover NW 450 in silo cylinder Crane eyelets, forklift pick-up shoes Vertical ladder + platform

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with compressed air accumulator 120 ltr, few operating hours

Kettle 100 l made of stainless steel for Bär R 100

Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!

We are selling here a kebab grill / gyros grill from the manufacturer Bartscher, type PDE303 in a very good used condition. Device runs on 400 volts, 5.5 kW, electric with ceramic glass, skewer height 47 cm, meat skewer capacity 45-60 kg, used only for test purposes, workshop tested, immediately ready for use, dimensions W/D/H 60/70/80 cm, others on request.

We offer Compressed air tank Flamco STAG 3000 l 16bar 60°C from compressed air system Picture 1-3 The system is part of a compressed air system in a production hall. It is used built in 1995/2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. specifications: - Manufacturer: Flamco STAG Behälterbau Genthin - Model: 3000l - Year of construction: 1995 - Item No.: 59457 - TüV.: still available -Ab. Operating pressure: 16 bar -Ab. Ground temperature: 50°C - Type marking ZU 295/6 - Dimensions: D 1200 x H 4000 mm - Weight: 704 kg - Craneable The container is still in our customer's factory in Halle all. The sale is ex-works EXW (loading facilities available). The compressed air system Fig. 4 - 10 also consists of -Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air  ...

9 SETS AVAILABLE: 1- BARMAG FK6-1000 M TYPE MULTİ (M6) YEAR 2000,TWIN MACHINE,DOUBLE DECK,W1.1,LYCRA,216 SPINDLES 2- BARMAG FK6-1000 V TYPE (V4) YEAR 2002,LYCRA,WITH INVERTER,240 SPINDLES 3- BARMAG FK6-1000 V TYPE (V5) YEAR 2002,WITH INVERTER,240 SPINDLES 4- BARMAG FK6-1000 V TYPE (V6) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 5- BARMAG FK6-1000 V TYPE (V7) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 6- BARMAG FK6-1000 V TYPE (V8) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 7- BARMAG FK6-1000 V TYPE(V9) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 8- BARMAG FK6-1000 V TYPE(V10) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES 9- BARMAG FK6-1000 V TYPE (V11) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES

A large stainless steel pressure tank is sold. Specifications: Manufacturer: BAM Freising Capacity: 8.000 Ltr. Year of Make: 1961 Pressure: 5 bar Papers available Dimensions: LxD: 3,800x1,800mm

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1282 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 123 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/perkins-1006-6-pump-800-bar-used/17 876, , = More information =, , Type number: 1006-6 POMP 800 BAR

Engine Brand: FORD, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 56 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/ford-2714e-pump-550-bar-used/17875, , = More information =, , Type number: 2714E POMP 550 BAR

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 28 Hour(s), Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: yes , Rated Power: 125 Kw, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/compressors/caterpillar-3306-compressor-1 3-bar-new/17871, , = More information =, , Year of construction: 1010, Empty weight: 20.000 kg, Type number: 3306 COMPRESSOR 13 BAR

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

Glass Filler, Bottle Filler, Beer Filler, Pressure Filler, Isobaric, Manufacturer: Kosme-Krones, Type: Barifill FC 30-6, Year of manufacture: 2015, Capacity 7,000 - 8,000 bottles / hour, set up at 0.33 - 0.50, 330ml - 500ml, 33cl - 050cl, 26 mm crown cork, Siemens S7, vacuum pump, operating hours: 18,412 hours. Glass Bottle Filler, Beer filler, Counter pressure, Isobaric, Made by Kosme Krones, Type: Barifill 30-6, Year: 2015, Capacity 7.000 - 8.000 bph, adjusted to 0,33 - 0,50, 330ml - 500ml, 33cl - 050cl, 26 mm crown cork, Siemens S7, vacuum pump.

Manufacturer: Barberan, Type: RAB 1300, Work piece width min-max mm: 1300, Working widht max mm: 1300, Spraying heads - total: 12, Feeding speed m/min: 2-12, Spraying heads - total: 12,

Manufacturer: Bartling Ventilator, Diameter intake mm: 400, Engine power kW: 18,5, rotations rpm: 2850, V-belt drive motor: yes, Enclosed impeller: yes, Suction side mm: 400, Outlet side mm: 400,

Manufacturer: Barberan, Year: 2012, Working widht mm: 1330, Adjustable: yes, Length mm: 2000, Driven: yes, Working widht mm: 1330, Conveyor speed m/min: 10-20, Year :2012

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1994 1 pipe reactive law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13.0 bar Increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control section, control cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2000 equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Make : LOOS; Gunzenhausen Type : U-HD Heating surface approx. : 31 m² Power max. : 2.000 kg/h most permissible. Operating overpressure : 10 bar Increased test pressure : 18 bar Water content at NW approx. : 1.740 l Water content full approx. : 2.480 l Year of construction : 1999 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, water level sight glass, steam and safety valve and the existing coarse and fine fittings

1 gebr. Boiler ---------------------------------- - mounted on frames - Manufacturer : Jumey Heating surface approx. Taxi: 40 m² Capacity : 2,000 kg/h Operating overpressure max. : 10.0 bar Previously operated with : 5.0 bar Water capacity at NW approx. : 3,540 l Water content full approx. : 4.750 l Year of construction : 1994 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, and the existing coarse and fine fittings.

Manufacturer: Bargstedt, Type: Winkelübersetzer, Control: no, Angular transfer: yes, Work piece width min-max mm: 1050, Min.-max. workpiece length in mm: 2500, Working length max mm: Länge Rollbahn 5300, Feeding speed max m/min: ca. 10-30, Feeding speed continous adjustable: möglich, Aushebestationen: Rechenaushebung Teilung 150/länge Rechen 2600 mm mm, Roller width in mm: 850, roller diameter mm: 60, Working hight mm: 920, Lift out roll system: Schiene, FREE TEXT: 2 Motore Antrieb Rolle/1 Motor Querübergabe,

Manufacturer: Bargtsedt Transportrollengang Schrägrollengang, Working length mm: 2940, Working widht mm: 1080, Total power kW: 1.5, Durchmesser Rolle mm: 70, Rollenmittenabstand: 140, angetrieben über Rundriemen: yes, Stop straightedge: yes, Anschlagkante Höhenverstellbar: yes, Total hight mm: 940, Feeding speed continous adjustable: yes über Umrichter möglich, FREE TEXT: 2 Antriebe und pneumatische Klappschiene für Vereinzelung/,

Manufacturer: 4 Stück Spehoma Transportbänder ca. 4500 mm 600 mm, Type: Transportband, Year: ca. 2000, Control: hand, Working length mm: ca.4000, Working widht mm: 600, UV-Band: 950 Verstellbar, Total hight mm: 1,5, UV conveyor belt: 8-20, Frequency converter: yes, Own controller: no, Bandsteuerung : yes, Year :ca. 2000

Manufacturer: Bargstedt Querabstapelanleg, Type: TSH 500 Q/, Year: 1999, Control: Bargstedt, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 280-2500, Min.-max. workpiece height in mm: 12-40, Vacuum feeding: yes, Crosswise feeding: yes, Stacking pattern, single-row: yes, Number of stacks: 2, Stack height in mm: 1600, Cycles approx.: ca.15, Removal of protective boards: j, Erection in a pit: no, Year :1999

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Bargstedt Abstapelanlage, Type: TSH 500/Q/30/12S, Year: 2005, Control: Homag, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 280-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stacking pattern, single-row: yes, Stacking pattern, double-row: yes, Number of stacks: 2, Stack height in mm: 1600, Removal of protective boards: yes, Erection in a pit: no, Year :2005

Manufacturer: Baberan, Type: LP 1400, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 10-60, Feeding speed min-max m/min: 10-40, Destacking plant: no, Stacking plant: no, Brushing machine: yes, Casein glue plant: yes, Brushing machine: yes, Roller diameter mm: ca.400, Lamination calender: yes, Press calender: yes, Roller diameter mm: ca.400, Rollers heated: yes, Heating medium thermal oil: yes, at top and bottom: yes,

Manufacturer: Bargstedt Aufstapelgerät, Type: TSP 15 D, Year: 1995, Control: Homag, Stacking device: yes, Work piece length min mm: 400-2500, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 400-2500, Min.-max. workpiece height in mm: 10-40, Stack height in mm: ca.900, Stack arrangement: mehrlagig, Workpiece weight/stack position in kg: ca.100, Inlet roller conveyor mm: yes, Outlet roller conveyor mm: no, Cycles approx.: ca.15, Feeding speed max m/min: 5-40, FREE TEXT: inkl Schaltschrank ohne Auslaufrollebahn, Year :1995

Manufacturer: Bartling, Type: Späneventilator, Year: ca.2008, Diameter intake mm: 400, Engine power kW: ca.18,5, Flow rate approx. m3/h: ca.8500, rotations rpm: 2850, Direkt drive: no, V-belt drive motor: yes, Enclosed impeller: yes, Outlet side mm: 400, Year :ca.2008

Manufacturer: Bargstedt , Type: TFU 02, Year: 1995, Conveyor belts Qty: 2, Conveyor belt 1 mm: 7000, Conveyor belt 2 mm: 3000, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-60, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: yes, Luftkissentisch pneumatisch: yes, Drain roller operation: 1300, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-60, Feeding speed max m/min: 10-30, Year :1995

Manufacturer: Baberan Kaschieranlage, Type: ECO Line 1400 DSI, Year: 2006, Work piece width min-max mm: 250-1350, Min.-max. workpiece length in mm: 450, Min.-max. workpiece height in mm: 6-40, Working widht max mm: 1350, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Urea plant: yes, Brushing machine: yes, IR zone: yes, Hardener machine: yes, Leimauftragsmaschine : 2, Double-sided: yes, Roller diameter mm: ca.300, Lamination calender: 2 Stück, Diameter of lamination calender in mm: ca.400, Roller diameter mm: ca.300, Rollers heated: yes, Year :2006

Manufacturer: Barberan, Type: HOK-C-1-1400, Year: 2012, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1330, Number of lamps: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Feedin speed m/min: 10-20, Year :2012

Manufacturer: Bargstedt, Type: Transportband, Year: ca1995, Control: hand, Working length mm: 6500, Working widht mm: 800, Total hight mm: 950 Verstellbar, Engine power kW: 1,5, Feeding speed max m/min: 8-20, Feeding speed continous adjustable: yes, Belt control: no, Working hight adjustable mm: yes, Year :ca1995

Manufacturer: Bargstedt, Type: PWH 21/ER/25/10, Year: 1992, Control: Programm, Work piece length max mm: 2500, Work piece length min mm: 300, Werkstückbreite max mm: 1000, Number of stacks: 2, Taktleistung ca.: 15, Compressed air bar: 6, Total power kW: 30, Number of sucking lines: 8, Feeding speed max m/min: 10-50, Feeding speed continous adjustable: yes, Protective panel feeding: no, Erection in a pit: no, Year :1992

Stripping of pinched/soled shafts

Type: EPC510-250 Tank: 250 liter 10 bar 510 liter/min 3 kW 220/380 volt

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.