bar cutting used for sale

- Total installed power 16 KW. - Part length from 240 mm to 3000 mm. - Maximum part width from 240 mm to 1200 mm. - Part thickness from 10 mm to 40 mm. - Maximum part weight 50 kg. - Maximum pile height approx. 1500 mm. - Production capacity between 12 and 15 cycles/min. - Head with suction cups, vacuum pump with 3 KW motor. - Output transfer of roller-belts motorized at 90°, dimensions approx. 3900 x 2600 x 1000 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-22

LNS QUICK LOAD SERVO 2 / Rod Loading Magazine -Rod diameter (round) 6 - 80mm -Pole length 1.3 - 1.5 meters -Bar weight max. 67 kg -Charging time 4 - 12 seconds -Feed speed Max 100m/min -Air connection 5 bar Dimensions: LxWxH 2.2x1.5x1.5 meters / Weight 650Kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Pallet barrier sign including feet, width sign 150cm, including steel foot Auction-ID: A1-45424-90

- Total installed power 16 KW. - Part length from 240 mm to 3000 mm. - Maximum part width from 240 mm to 1200 mm. - Part thickness from 10 mm to 40 mm. - Maximum part weight 50 kg. - Maximum pile height approx. 1500 mm. - Production capacity between 12 and 15 cycles/min. - Head with suction cups, vacuum pump with 3 KW motor. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-154

Various salt marsh holders, from various manufacturers. Auction-ID: A7-45181-38

For sale I offer a hydraulic hand pump from Tecpos. The hand pump was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos ESP-08 Operating pressure: max. 700 bar Oil Supply: 800cc Shipping available for an extra charge. The hydraulic hand pump is workshop tested and sold ready for immediate use with a new UVV test and can be tested on site. Other accessories available on request. # Hand Hydraulic Pump # Hand Pump # Hydraulic Cylinder # Hydraulic Hand Pump # High Pressure Pump # High Pressure Hand Pump # Hydraulic Hand Pump # Hydraulic Pump

For sale I offer a hydraulic cylinder from Tecpos. The cylinder was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos TSLC-3013 Operating pressure: max. 700 bar Stroke: 13 mm 30 ton Flat cylinder -Single-acting, with spring retraction Shipping available for an extra charge. The hydraulic cylinder is workshop tested and sold immediately ready for use with a new UVV test and can be tested on site. Other accessories available on request. # Short Stroke Heavy Duty Cylinder # High Pressure Hydraulics # Compact Cylinder # Light Metal Cylinder # High Pressure Cylinder # Universal Cylinder # Hydraulic Cylinder # Directional Cylinder # Hydraulic Punch # Hydraulic Pressure Cylinder # Lifting Cylinder # Pressure Punch # Hydraulic Short Stroke Cylinder # Hydraulic Flat Cylinder

2 pallets + lid Bartling / Greiner A1 - BE PP natural, 17632 cup + slip-on lid red, cup size Ø 95.0 = 150 ml, height 46.0 Auction-ID: A7-45675-17

3 pallet cups + lids Greiner and Bartling, 3 SSB Euroboxes sealing cups approx. 200 ml with lid, approx. 8000 cups + 2122 lids transparent PP Ø 98.8 mm and cups Ø 95 mm, height approx. 48 mm Auction-ID: A7-45675-20

Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.

Cross slide in pos. 1, 2, 4, 5, Drive for cross slide in pos. 2, Pickup spindle, hydraulic in pos. 6, Mechanical double slide in pos. 6, Pneumatic workpiece unloading device, High pressure coolant system with chiller, Swarf coneveyor, worm type with magnetic filter unit, Set of tool holders, Set of cams, Number of spindles: 6, Spindle speed [rpm]: 5.000, Auto bar loader: Iemca PRA 52 F

Works perfectly Maintenance and oil change done Auction-ID: A3-43510-35098

Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard  ...

Bar table wood dark ø approx. 60 cm height approx. 110 cm

RE-BAR-TIER RB398 mild steel battery binding machine, 2 batteries, charger, without any other accessories such as binding wire or similar

RE-BAR-TIER RB398S mild steel battery binding machine, 2 batteries, charger, plus 8 boxes of TIEWIRE TW898-G binding wire

Please note: all drums have different sizes and conditions Different sizes Auction-ID: A1-40104-129

Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-44885-29

Equipped with hot water with 700 liter buffer tank; adjustable temperature up to 90 °C; Stainless steel diesel fired burner system; max working pressure 250 bar; 2x LED work light; water tank; high-pressure hose length 17 meters; high-pressure spray lance; electric start; 15 hp 4-stroke petrol engine; 4 extra nozzles; venturi valve connection for adding chemical liquid; unused Auction-ID: A1-40134-350

Processing Capacity: Minimum bar diameter: 8 mm Maximum bar diameter: 80 mm Magazine capacity (MP version): 300 mm (inclined warehouse) Magazine capacity (P version): 700 mm (chain elevator magazine) Magazine capacity (F version): 2,000 kg bundle (belt magazine) Bar feed speed: Adjustable up to 500 mm/s Return speed: Up to 1,000 mm/s Maximum Thrust Force: Electronically adjustable (for thin or heavy bars) Thrust system: Brushless motor with digital drive Total length: Approx. 4,100 mm (for 3.3 meter bars) Width: Approx. 900 mm (varies depending on the type of warehouse) Bar axle height: Adjustable from 900 mm to 1,250 mm Total weight (empty): Approx. 1,100 kg – 1,300 kg Auction-ID: A7-44885-33

2 x bar storage rack, shelf load max. 250 kg, bay load max. 2000 kg Auction-ID: A7-45768-119

Control: Sigma Control 2 Including: Cyclone cutter KAESER f26 KC with electronically level-controlled steam trap ECO-DRAIN 31 G1 Oil-water separator Kaeser AQUAMAT CF6 Adsorption dryer Kaeser DC 18E 95 Dimensions 750x750x1950 mm WxLxH Weight 220Kg Activated carbon filter F22KA G3/4 Pressure vessel 11 bar Standing volume: 1000L Including:Valve set and condensate emptying ECO-DRAIN 31 Overflow valve 44-6B G3/4 PN16 4-10 bar Auction-ID: A1-45762-116

Barriers 2200 x 400 x 1150mm (Qty 43), Road signage (Qty 7), Plastic barriers 2000 x 660 x 1000mm (Qty 8), Safety cones (Qty 10). Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-159

Set of 30 threshold bars, mix of sizes and models Auction-ID: A1-45282-178

Pallet, consisting of 800 threshold bars, new, wrapped, individually mix of style and size new Auction-ID: A1-45282-152

Manual sweeper, 3 brushes. Overall dimensions 650x550x300 mm Auction-ID: A7-44864-55

Collection volume 203 l, load capacity 300 kg Auction-ID: A1-45682-55

Voltage 24 V DC, scanning range 0.5-17 m or 0.5-90 m, 4 light beams, consisting of 2x SICK M2C SA0430LA10 and 2x SICK M2C EA04300A10, incl. mounting material Auction-ID: A1-45682-9

Voltage 24 V DC, scanning range 0.5-15 m or 0.5-90 m, 4 light beams, consisting of 2x SICK M2C SA0430LA10 and 2x SICK M2C EA04300A10, incl. mounting material Auction-ID: A1-45682-2

Set of 30 threshold bars, mix of sizes and models Auction-ID: A1-45282-134

Voltage 24 V DC, scanning range 0.5-17 m or 0.5-70 m, 4 light beams, consisting of 2x SICK M2C SA0430LA10 and 2x SICK M2C EA04300A10, incl. mounting material Auction-ID: A1-45682-13

Pallet, made up of 800 threshold bars, new, wrapped, individually mix of style and size new Auction-ID: A1-45282-181

Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible.

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

With residual content, residual content unknown, in stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-513

With residual content, residual content unknown, in stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-514

In stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-509

In stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-511

In stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-508

High performance 8 bar steam machine, ideal for industrial cleaning, auto, professional kitchen... Stainless steel boiler, water + detergent tanks, superheated injection, automatic refilling. Very good condition. Reliable and powerful pro hardware. Steam production: up to 388 g/min Outlet temperature: 180°C 3m steam hose Served as good as new for a year Auction-ID: A1-45489-84

With residual content, residual content unknown, in stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-515

In stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-512

Garden barbecue, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-45834-325

Garden barbecue, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-45833-325

Garden barbecue Overall dimensions: 1200 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-45834-225

Garden barbecue Overall dimensions: 1200 x 800 x 500 mm Weight: 20 kg Auction-ID: A7-45833-225

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com Auction-ID: A7-45878-14

CNC Bar Machining Center for Aluminum, Machine No. 1310031121, machining length max. approx. 7200 mm, tool turret 8-fold, spindle power max. approx. 5.5 KW, angle head saw unit, angle head drilling/milling horizontal 2 pieces, drilling/milling vertical 5 pieces, brackets 8 pieces, material tensioner 8 pieces, control Ferrocontrol (The article is in its condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Attention: The Elumatec CNC bar machining center stands on a pedestal with a mesh floor. This area was the former ramp area. The mesh floor must not be driven on with a forklift. Important, bring drivable plates and tank roll ...

Width between the columns 2600mm. Already disassembled Auction-ID: A1-42014-272