128,279 used machines on RESALE, but how to find them? Machine Search
L-Sealer for shrink wrap packaging, for very large sized product, semi-automatic (manual infeed of product, automatic outfeed) with pneumatic closing mechanism of L-bar sealer. Suitable to be combined with SHRINKtunnel POF-XXL. - Technical specifications: 220V, 2.0kW | compressed air: 5.5bar, 0.1m? | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L900xW600xH300 (can be varied on demand) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions depending on actual packaging size required | weight (net/gross): 210/250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the ...
Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L450xW400xH300 | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L1560xW760xH1040 | weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note ...
used
Max stock diameter 20 mm Number of tool stations 30 Spindle speed 10.000 rpm Main Spindle Axes 4 Back Spindle Axes 4
Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.
Stock number: PM1553, Excentric screw barrel pump, stainless steel,, Flux, 1,1 kW motor, 900 rpm., 220/380 Volt., Bar Ø 50 x L 1000 mm., Material: Stainless steel AISI 304
Stock number: P311, Barrel pump, stainless steel,, Lutz type Niro 40., Ex motor 220 volt,, 460 watt, 9100 rpm., Straw Ø 40 x L 900 mm.
Stock number: P285, Barrel pump, stainless steel,, 18800 rpm. 220/380 V., Straw Ø 33 mm. x L 3025 mm., Material: Stainless steel AISI 304
200 litre, Stock number: T3739, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 560 mm., Total height: 870 mm., Other: Strengthening ring and fastening band in the top
150 litre, Stock number: T3357, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 8 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 550 mm., Outer diameter: D 590 mm., Total height: 650 mm., Other: Strenthening ring in the top
150 litre, Stock number: T3962, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 94 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 550 mm., Outer diameter: D 590 mm., Total height: 650 mm., Other: Strengthening ring in the top and lid with fastening band
200 litre, Stock number: T1690, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Barrel, Standing: On strengthening ring, Top: Open with lid, clamping fixture and strengthening ring, Inner diameter: Ø 560 mm., Total height: 825 mm.
3-jaw wedge rods lathe chuck FORKARDT TYPE F+160No. 1659 181Identical to Forkardt, SMW or RöhmDiameter: 160 mmInner diameter: 45 mmChuck flange: Short taper DIN 55022 Size 61 Set of chuck jaws consisting of basic jaws and hard top step jaws for turning1 set of chuck jaws consisting of basic jaws and soft top step jaws for turning- central adjustmentWeight: 11 kggood condition; used
Hand lever shears VEB Scherenbau Nossen type ScDH10Knife length: 180 mmSheet thickness: max. 10 mmFlat material: 50x15 mm4-edge solid material: 22x22 mmRound steel: 24 mmAngle steel: 60x7mmT-steel: 60x7mmon mobile undercarriageWeight: approx. 150 kg; used
Hydraulic power unit for mobile clinching pliers or mobile former ECKOLD type HA 500 / 2Fabr. No. 737 / 783 Year of construction 1991Hydraulic power unit type HA 500 / 2Operating pressure 50 - 500 bar adjustableFlow rate 2.6 l/minTank capacity 16 litresEngine power (hydraulic) 3 kWNead power 380 Volts, 50 Hz.Control voltage 24 Volts, DC pressure line with screw coupling- With solenoid valve HAWE GS 2-2- mobile on 4 swivel castorsWeight without hydraulic oil 125 kggood condition; used
Mori Say TM626 AC, - 5 axial slides, - 4 cross slides, - double slide pos. 6, - pickup spindle, - swarf conveyor with vibrating filter device, - high pressure coolant system, - set of tool holders, - IEMCA PRA auto bar loader L = 3 m, Country of origin: Czech Republic, Operating hours: 23.950, Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: Iemca PRA 40/33 P
Hilger & Kern P80 Pump Basic version P80 Barrel size 80l Gear ratio (drive) 56:1 Flow rate (with 20 double lifts) l/min 0.61 Material Viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum container Ø outside mm 440 A single pump is included Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
Z640 Mixed Lot (134 pieces) Feed Pliers Automatic Lathe Lathe Turning Center probably for Index Traub or Schütte or similar machines
Drum mixer for e.g. plastic granules or other Capacity 50kg (2 bags) granules + masterbatches Including approx. 18 usable barrels, 2 of which are made of metal
Manufacturer: SPINNER Model: SERVO - LOAD 80 - 1200 Year of Manufacture: 2011 Voltage (U): 3/PE ~ 400 V Frequency (f): 50/60 Hz Input Current (Iᵍ): 5 A Fuse Rating (Iₙ): 10 A Find more here - / Contact us at -
CONTROLS electronic controls DIMENSIONS / WEIGHTS space requirements -left/right-: 4600 mm space requirements -front/back-: 600 mm total height: 1200 mm total weight approx.: 500 kg ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz
1 Loos steam boiler, 12 bar, 10 tons Type AW1-1 No. 53658/1 Output 10 tons of steam at 12 bar Up to 235 °C, 385 kW Year of manufacture 1991 With White Head Burner Machine with EL heating oil and gas firing Type RGL 70/1 A, Category J Fabr. Item no. 362680 Year of manufacture 1991
1 standard steam boiler, 10 to 13 bar Manufacturer No. K19105/AV Type: 128.9, built in 1990 Output 13 bar, 10.8 tons of steam per hour +Up to 300 °C steam temperature With white main burner for light oil Type: RGL70(2-A), No. 5163093 Year of manufacture 2002, output up to 10,500 kW With 1 horizontal feed water tank Manufacturer: Kyll, Bergisch Gladbach Capacity: 19.860 l, Max. Temp. 110°C, with 1 water treatment system for boiler water with sep. Control cabinet system
Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.
Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: CUCCHI BLT Typ MULTI F-6, Model AN / PB20, Version 3,3 M, Working hours: 1996
multi spindle bat automatic, GWM TECH S42-6 AC, automatic bar loader, Cucchi Pietro
Max. load: 350kg, no known defects, without accessories, spare parts, or documentation, year of manufacture: approx. 2015. An on-site inspection is possible.
Two larger bar feeders with drum magazines and one smaller unit are available. 1) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 2) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 3) Kurt Breuning (IRCO) ILS RBK 10016, year of construction: 2005, max. material diameter: 100mm, max. bar length: 1600mm, height adjustment: approx. 250mm. Machine dimensions X/Y/Z: approx. 2350mm/1000mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500 The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Type: VX 2078 - Mach. No.: D 6221 / D 6222 - Year of Manufacture: 2005 - Size: 2.000 x 6.000mm - Included: 2 Pcs. Unbalance exciters, Cardan shafts, 30 kW/750 RPM E.Motor and Springs - Can be sandblasted and painted.
Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, worm type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Max. stroke ...
Index MS 16C, CNC-Mehrspindelautomat, - single-NCU mit PCU, HSP Einzelantrieb, - INDEX-Steuerung SolutionLine, - Farbbilschirm 47 cm, - Signalleuchte Smartligth mit LED, - EG-Konform CE-Zeichen, max. Spindeldurchlass 16 mm, Schlitteneinheit 1.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 1.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.2, X-Achse NC-gesteuert, Z-Achse starr, Schlitteneinheit 6.1, Z-Achse NC-gesteuert, Schlitteneinheit 6.2, X-Achse und Z-Achse NC-gesteuert, - ...
Bosch Aventics, R 412 000 393, R412000393, rotary module, Pemax: 8 bar Item condition: unused stock goods The goods come from a company liquidation from the automotive industry and were temporarily stored in paternosters. Slight traces of storage possible. H1R6A13K33 12_CK 2Kg You can find more rotary modules - new and used - in our shop! International shipping costs on request!
Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible.
The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it:, - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products., - Applications: Its typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese., - Specifications: Although specific technical specifications can vary, common features might include:, - Capacity: Often measured in liters per hour, indicating the amount of milk it can process., - Pressure Ratings: The operating pressure used during the homogenization process., - Material: Typically made from stainless steel for hygiene and durability., - Efficiency ...
- Producer Barberan - Length 2.500 mm - Working width 1.300 mm - Working height 890 + - 30 mm - FU-Regelung für Feed speed ~ 5 - 25 m/min - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Colour 7035
- Producer Barberan - Length 2.000 mm - Working width 1.300 mm - Working height 890 + - 30 mm - FU-Regelung für Feed speed ~ 5 - 25 m/min - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Colour 7035
Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers
SMIPack BP600 Monoblock semi auto shrink wrapper with sealing bar 2013, Monoblock semi auto shrink wrapper with sealing bar, sealing bar 550mm, max output 10 packs per min, max product height 380mm, 3Ph
A 2-station party keg filler small keg filler Esau & Hüber is available. Filling capacity: 300/h, keg size: 5l, filling positions: 2. An on-site inspection is possible.
Machine feature: A standard steam boiler, 10 to 13 bar Manufacturer Part Number: K19105/AV, Type: 128.9, Year of construction: 1990 Output: 13 bar, 10.8 tons of steam per hour Up to 300 °C Steam temperature With white main burner for light oil, Type: RGL70(2-A), Number: 5163093 Year of manufacture: 2002, Output up to 10,500 kW With a horizontal feed water tank, Manufacturer: Kyll, Bergisch Gladbach Content: 19,860 liters, Permissible temperature: 110°C With a water treatment system for boiler water with a separate control cabinet system
maximum number of results exceeded
please refine your search
