bar cutting used for sale

Supply air pressure regulator, pressure regulator SAMSON Type 4708 4708-1222010320000 0.5 - 6.0 bar ( 5 - 60 kPa / 8 to 90 psi ) pmax. 12 bar Connections: G 1/4 ( ISO-228/1 ) Material: Aluminium New, with documents ! Dimensions ( pressure regulator ): 150 x 100 x 80 mm Dimensions ( packaging ): 230 x 165 x 150 mm

Specifications: - Flat steel shears cut up to 450 x 15 mm - up to 300 x 20 mm - Profile steel shears - cuts L-steel at 90° up to 150 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device up to 12 mm - no notching tool available! - Hole punch - punching force 850 KN - with stop table - Projection 510 mm - punches in steel up to 26 mm Ø in 22 mm - 50 mm Ø in 12 mm - various punches + matrices - Support table - E. Contact stop - Drive 400V / 7.5 kW - Space requirement approx. W 1050 x H 1900 x D 2300 mm - Weight approx. 2850 kg

Pressure Switch TIVAL SENSORS Type: FF4-32 DAH Item no.: 1010076 Pressure range: 2 - 32 bar pmax. 52 bar Switching capacity: 230 V AC 16 ( 6 ) A used, tested Dimensions: 165 x 105 x 80 mm

Pressure regulator, manually adjustable, for compressed air DRÄGER TESCOM Type: D40470 42350-007 Inlet pressure: max. 20 bar 3Outlet pressure: 0 - 10 bar Flow rate: max. 25 l/min Connections: 1/4 ( inch ) Material: stainless steel used, tested ! Dimensions: 110 x 105 x 50 mm

Pressure regulator with digital precision pressure switch SMC AR40 - 02 Control range: 0.5 - 8.5 bar ( 0.05 - 0.85 MPa ) Pressure switch: ISE50 - T2 - 62L Pressure range: 1.0 - 10.0 bar ( 0.1 - 1.0 MPa ) Operating voltage: 12 - 24 V DC Outputs: 2x pnp open collector ( 80 mA ), 1x analogue approx. 0.45 m connection cable used, tested ! Dimensions: 140 x 120 x 125 mm

Maintenance unit REXROTH 535 182 402 0 1x manual shut-off valve C15i, 5352620000 1x filter FIL C15i, 5351220020 1x filter FIL C15 i, 5351220010 1x Filter FIL C15i, 5351220810 1x Pressure Regulator REG C15i, 5351420020 1x Pressure Switch, 341 058 000 0 2x 5351022302 Control Range: 0.5 - 10 bar Maximum pressure: 12 bar New ! Dimensions: 390 x 270 x 102 mm

Varius barns connected barn 4 and 5 can be taken completely Complete shed with solar panels Total amount of pannels 4200 Year of installation 2012 type JA SOLAR JAP6- 60- 240. complete with inverters and system..

Pressure Regulator, Pressure Regulating Valve, Precision Pressure Regulator FESTO LRN-1/4F-B 13232 Control range: 0.0 - 0.7 bar pmax.: 8 bar Installation dimensions: 54 mm Connections: 1/4 ( inch ) New ! Dimensions: 108 x 62 x 54 mm

Oil refueling pump SCHNITZLER GmbH pump: EPE15 0,63 Q: 13 l/min p: 9 bar at n: 1380 rpm engine: 0,,75 kW 1380 rpm 230 V 1AC 50 Hz approx. 10 m filling hose with nozzle approx. 1.5 m suction hose approx. 10 m mains connection cable with bracket for fastening oil tank ( width: 730 mm ) used, tested ! Dimensions: 850 x 700 x 540 mm

grease lubrication pump, lubrication pump MERA-POLNA PA 12 - 1 nominal pressure: 38 MPa ( 380 bar ) motor: SKg80-4B 0,75 kW 1400 rpm 220 / 380 V 3AC New ! Dimensions ( grease pump ): 700 x 500 x 900 mm Dimensions ( transport ): 800 x 630 x 1000 mm

grease lubrication pump, lubrication pump MERA-POLNA PA 12 - 5 nominal pressure: 36 MPa ( 360 bar ) motor: SKg80-4B 0,75 kW 1400 rpm 220 / 380 V 3AC New ! Dimensions ( grease pump ): 600 x 500 x 660 mm Dimensions ( transport ): 800 x 630 x 800 mm

inkl. Hülse für die CIP  More then 300 machines new and second hand on our seema .de

portable motor sprayer VOGT Type 1-86 BZS Q: 400 l/min 4 bar Engine: 1 cylinder 2-stroke 8,5 hp ( 6 kW) n: 3800 rpm tank: 11 l consumption: approx. 4 -5 l / h unleaded petrol 1:40 Weight: approx. 70 kg with syringes and tools ! used, tested ! Dimensions: 1000 x 800 x 800 mm

Videojet P3400 RH14\ Zebra 170PAX4 label printer and pneumatic stamp. RA2043 Printer manufacturer: Videojet/Zebra Printer type 117PAX4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284, LAN Print media: standard media, tags and RFID media label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 170PAX4 Druckmedien: Standart und Anhänger

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

Label dispenser Macro SP12 right side RA1956 Manufacturer: Schwinn Model: Macro SP 12 Year of manufacture: 2018 Alignment: right Label passage: up to 115 mm Label speed: 1-18 m/min Maximum diameter label roll: 300 mm Core diameter 40 mm expandable with adapter Power supply: Euro plug 230/50Hz Integrated control with control parameters, controllable inputs and outputs, fault messages,... Additional equipment: Start triggering external AP 010-500 Vacuum Applicator Module Maintenance - equipment - combination Core adapter AP 031 Prewarning - label supply Mounting frame Control box Warning light, 3-stage Features: nominal voltage: 50Hz, 230 maximale Etikettengröße: 115 Etikettengeschwindigkeit: 1-18 m/min Kerndurchmesser Rolle: 40 mm maximale Größe Etikettenrolle: 300 Etikettendrucker enthalten?: NEIN Etikettenaplikator?: Stempel Vorwarnung Etikettenvorrat: JA Hub Aufklebestempel: 500 m ...

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

Differential pressure gauge with remote sensor, diaphragm differential pressure gauge MANOMETER WITTGENSDORF Type: PM Diff. 160 0 - 400 kPa (0 - 4 bar) Housing diameter: Ø 160 mm Accuracy class: 2.5 upstream measuring valve New ! Dimensions: 335 x 210 x 150 mm

Differential pressure gauge with switching contacts, diaphragm differential pressure gauge MANOMETER WITTGENSDORF Type: PM Diff. 160 0 - 600 kPa (0 - 6 bar) Switch type: 2/Z112-1 Switching capacity: 220 V AC / DC 30 W (VA) Case diameter: Ø 160 mm Accuracy class: 2,,2,5 upstream measuring valve New ! Dimensions: 335 x 210 x 150 mm

Differential pressure gauge with remote sensor, diaphragm differential pressure gauge MANOMETERWERK WITTGENSDORF Type: PM Diff. 160 0 - 1.6 MPa (0 - 16 bar) Housing diameter: Ø 160 mm Accuracy class: 2.5 upstream measuring valve New ! Dimensions: 335 x 210 x 160 mm

Differential pressure gauge with remote sensor, diaphragm differential pressure gauge MANOMETERWERK WITTGENSDORF Type: PM Diff. 160 0 - 16 kp/cm² (0 - 16 bar) Housing diameter: Ø 160 mm Accuracy class: 2.5 upstream measuring valve New ! Dimensions: 335 x 210 x 160 mm

Contact pressure gauge, pressure gauge with switching contacts MANOMETER WITTGENSDORF 0 - 100 kPa (0 - 1.0 bar) Switch type: 2/Z134-1 Switching capacity: 220 V AC / DC 30 W (VA) Case diameter: Ø 160 mm Accuracy class: 2.5 New ! Dimensions: 210 x 205 x 150 mm

Contact pressure gauge, pressure gauge with switching contacts MANOMETER WITTGENSDORF - 100 - 500 kPa (-1.0 - 5.0 bar) Switch type: 2/Z134-1 Switching capacity: 220 V AC / DC 30 W (VA) Case diameter: Ø 160 mm Accuracy class: 2.5 New ! Dimensions: 210 x 205 x 150 mm

Contact pressure gauge, pressure gauge with opto-electronic switching device URSAMAT 0 - 60 kPa ( 0 - 0.6 bar) Switch type: 3.6C10/11 Case diameter: Ø 100 mm Accuracy class: 2.5 New ! Dimensions: 175 x 100 x 150 mm

Contact pressure gauge, pressure gauge with switching contacts PRESSURE GAUGE MOVEMENT WITTGENSDORF 0 - 60 kPa (0 - 0.6 bar) Switching capacity: 220 V AC / DC , 5 - 15 W / 10 - 25 VA Case diameter: Ø 100 mm Accuracy class: 2.5 New ! Dimensions: 175 x 100 x 150 mm

Contact pressure gauge, pressure gauge with switching contacts MANOMETER MOVEMENT WITTGENSDORF 0 - 400 kPa (0 - 4.0 bar) Switching capacity: 220 V AC / DC , 5 - 15 W / 10 - 25 VA Case diameter: Ø 100 mm Accuracy class: 2.5 New ! Dimensions: 150 x 145 x 140 mm

Contact pressure gauge, pressure gauge with opto-electronic switching device URSAMAT 0 - 60 kPa ( 0 - 0.6 bar) Switch type: 3.6C10/11 Case diameter: Ø 100 mm Accuracy class: 2.5 New ! Dimensions: 150 x 145 x 140 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 15 MPa (0 - 150 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 60 x 60 x 65 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 20 MPa (0 - 200 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 60 x 60 x 65 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 35 MPa (0 - 350 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 60 x 60 x 65 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 40 MPa (0 - 400 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 60 x 60 x 65 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 10 MPa (0 - 100 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 71 x 71 x 65 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 16 MPa (0 - 160 bar) scale: 0 - 300 kN TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 71 x 71 x 65 mm

Mechanical stainless steel pressure gauge LABOM NG 63 Type BH51 0 - 10 bar DN50 PN25 Housing diameter: Ø 100 mm Taper socket with groove nut thread 78 x 1/6 New ! Dimensions: 100 x 92 x 195 mm

Pressure gauge set MANOMETER WORK WITTGENSDORF 0 - 10 kp/cm² (0 - 10 bar) Accuracy class: 2.5 Case diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) New ! Dimensions(single pressure gauge): 140 x 100 x 93 mm Dimensions(Packaging): 250 x 125 x 100 mm

Pressure gauge GAUGE BEIERFELD 1/BM20/2 0 - 100 kp/cm² (0 - 100 bar) TGL16374 Accuracy class: 1 Case diameter: Ø 160 mm connection thread: M20 x 1,00 5 New ! Dimensions: 205 x 160 x 55 mm

Manometer MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 1,6 kp/cm² (0 - 1.6 bar) TGL16374 Accuracy class: 1 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Pressure gauge MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 10 MPa (0 - 100 bar) TGL16374 Accuracy class: 1 Case diameter: Ø 160 mm Connection thread: M20 x 1,5 New Dimensions: 200 x 160 x 55 mm

Manometer MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 10 MPa (0 - 100 bar) TGL16374 Accuracy class: 0.6 Case diameter: Ø 160 mm connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Pressure gauge MEASURING PLANT BEIERFELD 1/FM20/2 0 - 1 MPa (0 - 10 bar) TGL16374 Accuracy class: 0.6 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 New Dimensions: 200 x 160 x 55 mm

Pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 250 kPa (0 - 2.5 bar) TGL16374 Accuracy class: 0.6 Case diameter: Ø 160 mm connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Pressure gauge GAUGE BEIERFELD 1/FM20/2 0 - 6 kp/cm² (0 - 6 bar) TGL16374 Accuracy class: 0.6 Case diameter: Ø 160 mm connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Pressure gauge MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 600 mmWS (0 - 0.06 bar) TGL16374 Accuracy class: 2.5 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Manometer MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 1500 mmWS (0 - 0.15 bar) TGL16374 Accuracy class: 2.5 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 New Dimensions: 200 x 160 x 55 mm

Pressure gauge MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 2,5 kp/cm² (0 - 2.5 bar) TGL16374 Accuracy class: 1 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2 x 0 - 60 kp/cm² (0 - 60 bar) TGL16374 Accuracy class: 0,, 6 Case diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New ! Dimensions: 220 x 180 x 75 mm

Double pressure gauge for fine measurements, pressure gauge MESSGERÄTEWERK BEIERFELD 1/FM220 2x 0 - 25 kp/cm² (0 - 25 bar) TGL16374 Accuracy class: 0,, 6 Case diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New ! Dimensions: 220 x 180 x 75 mm

Differential pressure gauge, pressure gauge MESSGERÄTEWERK BEIERFELD 1/BM90 0 - 600 kPa (0 - 6 bar) TGL16374 Accuracy class: 2,,5 Case diameter: Ø 150 mm Connection thread: 2x M20 x 1.5 New ! Dimensions: 220 x 180 x 75 mm

Pressure gauge MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 15 kPa (0 - 0.15 bar) TGL16374 Accuracy class: 2.5 Case diameter: Ø 160 mm connection thread: M20 x 1.5 New Dimensions: 200 x 160 x 55 mm

Contact pressure gauge, pressure gauge with switching contacts MANOMETER WITTGENSDORF 0 - 16 kPa (0 - 0,0,) 16 bar) Switch type: 2/Z112-1 Switching capacity: 220 V AC / DC 30 W (VA) Housing diameter: Ø 160 mm Accuracy class: 2.5 Connection thread: M20 x 1.5 New ! Dimensions: 210 x 205 x 150 mm