bandsaw wheel used for sale

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type MAC 10x15 A/C TRI -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 471 kg

fully hydraulic wheeled excavator Liebherr 912, built in 1986 4 times twin tyres. 70 KW 6 cylinder Deutz engine. Rideable on the road. Additional hydraulic connections for chisels. Device is operational. Equipment : trench bucket, bowl gripper, 3 normal spoons in different widths. Total weight 18 tons (can be driven on a low-loader)

Ident-Nr.: CAT0906MKH6603880 Weight: 5600 kg bucket: 1 CBM : Stunden : 80 % quick coupler: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2022, fuel: diesel, KW: 34.3, total weight (kg): 4,500, read operating hours (h): 210, vehicle identification no.: 349040715, 1 grab bucket KRAMER 10000275259, serial number: IXS10_26_22_003, width: approx. 165 cm, weight: 464 kg, 1 pallet fork WACKER NEUSON, Damage: all around Traces of use

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2020, fuel: diesel, total weight (kg): 4,500, reading operating hours (h): 862, vehicle identification no.: 349011833, 1 grab bucket KRAMER 10000275259, serial number: 071433 0320 0804, year of manufacture: 2020, width: approx. 165 cm, weight: 440 kg, 1 pallet fork WACKER NEUSON , Damage: all around Signs of use

Description: Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 1,100 mm, weight approx.: 350 kg

Description: Grinding wheel diameter: 150 mm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 300 mm, weight approx.: 10 kg

Wheeled excavator / material handler, Manufacturer: TEREX, Type: TM230, Year of manufacture: 2008, Fuel: Diesel, KW: 114,0, Gross vehicle weight (kg): 23,000, Read operating hours (h): 7,228, Serial no.: 230M301348, Condition: lower cab window defective, Replacement windshield supplied, Operating hours Hydraulics: 1,762 h, operating hours Driving: 4,992 h, Engine type: OSB6.7/114, Liftable driver's cab, with front and rear outriggers, all inspections/UVV/oil change last carried out by ATLAS in November 2023, with peel grab/spider ATLAS, serial no.: 555E, with electrical connection for lifting magnet, steering column/rain roof window/silencer/floor plates new

Bucket wheel with worm coils Manufacturer: Stichweh Type 60/80 F8 Year of construction 1990 (1998) Wheel diameter approx, 3000 mm Wheel width 900 mm Drive 4 KW Weight 9000 kg

From a current recycling we offer you Puma yard loader HL ECO 34 c. Year of construction 2022 Hours: 64.1 Condition:- Original price: - Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89281 Altenstadt The sale is without warranty Subject to prior sale

total wight: 5675 t axial load -forward: 2450 kg axial load - rear: 3750 kg output: 45 kw serial number: KMTWA112P79H60576 lifting capacity: 2,5 Tonnen : 30 % : einen Number of working hours: 2900 h blower power: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 0-600mm 0.01, Digital scrapers with micrometric screw, Chromed stainless steel, On / off - zero - mm / inch - ABS - hold - preset +/-, Tip with carbide insert The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 855 x 390 x 295 mm, weight approx.: 11 kg

Description: 230 V, 4.1 A, 2800 RPM, 400 V, 2.4 A, Grinding wheel diameter 200 mm Approx. Onsite Dimension. (l x w x h): 500 x 400 x 1,100 mm, weight approx.: 40 kg

Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg

Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg

Description: Additional information: Grinding wheel balancing device, manual operation, robust construction, safe, effective, H = approx. Ø 250 mm per wheel, I = approx. 130 mm, dimensions (LWH): 360x100x380 mm weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 360 x 100 x 380 mm

Description: Additional information: Grinding wheel balancing device, manual operation, robust construction, safe, effective, H = approx. Ø 140 mm per wheel, I = approx. 90 mm, B = approx. 440 mm, A = approx. 600 mm, D = approx. 640 mm, dimensions (LWH): 440x600x640 mm weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 440 x 600 x 640 mm

Description: Additional information: Grinding wheel balancing device, manual operation, robust construction, safe, effective, cast iron devices with a spirit level and 3 adjusting screws Horizontal position of the devices. weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 650 x 420 x 350 mm

We offer you a Giant G2200 HD wheel loader from a current recycling. Year of construction 2022 Condition: Original price: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 31633 Leese The sale is without warranty Subject to prior sale

ID3264 Caterpillar 972-14A year/Year of construction 2023 1030 hours/hours 25 t with bucket, without quick coupler, with central greasing with bucket, without quick coupler, with central lubrication

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

workpiece length:350 mm work piece width:150 mm diameter:Tellerradius 200 mm tool taper:M32 x 1,5 spindle diameter:32 mm grinding width:max.450 mm turning speeds:3385 U/min work table::Höhe 1000 mm workpiece height max.:100 mm total power requirement:1,1 kW weight of the machine ca.:300 kg dimensions of the machine ca.:700 x 800 x 1170 mm

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electr ...

Working diameter: 1000mm, working height: 450mm, max. workpiece weight: 900kg, noise level: 78dBA, connected load: 7.34kW, length: 3000mm, width: 3000mm, height: 3500mm, weight: 2.045t, operating hours: 9372h, including documentation, cabin with turntable, manganese lining, blast wheel (radial armouring, ceiling armouring, throwing blades in HM design), sieve, bucket elevator, separator, extraction system cyclone, filter (new filter cartridges installed), control panel electrical system, has been regularly maintained, on-site inspection is possible.

Dimensions (L, W, H): 2, 60m x 1.05 m x 2, 00 m Which parts can be printed: soft drink / glass closure / 400 parts per minute Accessories:-42 roller 100 x 100, different motifs -2 printing units with 1 pressure tool (paint bucket, 4 color tubes, 1 colour Cup holder with paint tins) -2 knife holder -approx. 10 doctor blades 0, 5 mm / 5 squeegee blade 1 mm / 2 m Blade Knife roll 0, 2 mm -1 intermediate drying -2 light barrier -various sensors

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600 Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500 Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250

Current stock: approx. 965 pcs. Included in delivery are: 01x castor, used Manufacturer: Kama Material Color Roll: Red Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 34 mm Bearings: Needle bearings Roll Material: Rubber Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( Oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 55 mm (middle - middle hole) Weight / pcs.: approx. 0.970 kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Current stock: approx. 400 pcs. Included in delivery are: 01x castor, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.556 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...

Current stock: approx. 370 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 150 mm Rolls Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: Polyamide Plate abbreviation: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.745 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of deli ...

Current stock: approx. 53 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.370 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...

Current stock: approx. 46 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: TENTE Material color roll: gray Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 32 mm Roll material: PP + TPE ← PA6 + PUR Plate abbreviation: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.57 kg

Current stock: approx. 350 pcs. Included in delivery are: 01x Bockrolle, used Material color roll: black Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: Solid rubber Rim material: Polypropylene Plate abbreviation: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.803 kg

Offer Forklift STILL EFG 1.5 o. R50 3 Wheeled forklift Trplex approx. 4 m lifting height with charger Picture 1-8 The forklift truck is being relocated from another location due to a business change and is now being sold at our customer's site. So far, it is ready for operation and working. It was still used from time to time. The nameplate is not legible. Data partly taken from comparable types from our exploitation. The forklift is still in use intermittently. Manufacturer: Still Type: verm EFG 1.5 or R 50 1.5 Tricycle Forklift No. 50148424? Year of construction: unknown older Hours: 60848 Load capacity: 1500 kg UVV: no needs to be renewed Technical and visual condition: ready for use, severe signs of wear, UVV no needs to be replaced, see photos Length: approx. 1700 mm Width: approx. 1000 mm Height: approx. 1930 mm Tyres: good Mast Type: Triplex Lifting  ...

- SP Flipping Wheels - 1 set with 10 pieces - HP Part Number CA397-02650 - for HP Indigo Series 2 Machines

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachige Kontaktperson in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment ...

ID3088 Fiebig E500 year of construction approx. 1990 Scoop wheel, diameter 5,000 mm, cup width 700 mm, 22 cups, geared motor brand HUEBER year of manufacture, 1996, 4 kW, frequency converter available Bucket wheel, diameter 5,000 mm, bucket width 700 mm, 22 cups, geared motor brand HUEBER built in 1996, 4 kW, frequency converter available

Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.

built 1984, 800 mm diameter, 1.400 mm cylindrical part, 570 mm cone height, 1 vacuum filter with bag charging hopper, filtering surface 2,3 m², 3 blow through cellular wheel sluices 150 mm x 150 mm for feeding a conveying system.

Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

Viledon Filter Mats, PA/560 G-10 TO Cut dimensions e.g. 2140 x 1229 or 4500 x 1436 or similar. The filter mats are superimposed, partly minimally contaminated on the side wheels, but otherwise as good as new. Delivery price 60% below new price plus VAT, packaging and transport. 8 €/m2 We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

1 pc. wheel loader tyres with rim The following information is available on the tyre: ALLIANCE 600/60-30.5, 12 P.R., NYLON, A8, FLOTATION 331 The tire is in good condition. Pick-up preferred, but on request a transport can also be arranged.

Technical data: Displacement of the grinding head: .60 mm Axis Shift: .50 mm Total power requirement: 25 kW Grinding pressure: 10-1000 N Grinding wheel diameter: 650 mm

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Transmission wheel made of steam engine Diameter wheel 2m Diameter shaft 170mm Suitable for generators, turbines and steam engines. Price 2,500.00€ plus VAT, ex warehouse

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Ladies and gentlemen, Below you will receive a non-binding offer for railway spare parts for all common railway coaches and railway freight wagons new and partly used: Wheelsets All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. Inte ...