bandsaw wheel used for sale

Landing gear, support wheel, swivel wheel -Manufacturer: Jungheinrich, chassis jockey wheel swivel wheel from pedestrian stacker type: ERC 205 -Wheel size: 140 x 54 Type GF106-G3 2.0 kW -Dimensions: 240/190/H280 mm -Weight: 16.6 kg

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Saw blade diameter: 350 mm cutting capacity at 90 ° round: 90 mm cutting capacity at 90 ° square: 160 x 70 mm section in MITRE at 45 ° rectangle: 120 x 60 / 60 x 80 mm cutting speed: 30 m / min drive motor: 1.1 kW space: 1000 x 1250 x 1380 mm weight: 795 kg

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

Very well maintained canters Quadro group Super 40 by Söderhamns/LFS. Indent with centering type MTG with chipping 240/12 Söderhamns, ventilation with 7 centring rollers and 4 x band saw AKE type Super 40 with roll diameter 1,400 mm. All linear axes with new servo cylinders type NOBEL. Machine until December 2016 in use. Super opportunity! Machines in very clean condition!

Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...

Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; Hydraulic Advancing; Chain Loading at 4 ways with hydraulic arms; Unloading Rollers System; Reverse Feeding Chain; Grinder manufactured by Vollmer.

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

No. 4428: 1 gebr. Horizontal band saw Fabr. SAMUR, type S-1000 V, Bauj. 1966 Arb.-Ber.: 800 mm throughlet width, Accessories: Table Dimensions: 610 x 610 mm Table extension on the left with welding device Other: Cutting height 350 mm Cutting speed 20-800 mm Sheet length: 4,550 mm. Blade width: 4 to 15 mm. Speed infinitely variable Cutting speed: 23-711 m / min Electric motor 380 V

Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg

Description Universal Vertical band saw of the brand Mössner suitable for tooling, fixture construction, training as well as mold making Extension: 280mm Cutting speed: 24 - 558 m/min Description : The machine comes from a tool factory and has been regularly serviced and has few operating hours. Technical data Year built / YOM 1973 Cutting speed / Cutting speed 24 - 558 m/min Extension / swing 280mm Feeds no Table / Table 500x400mm Machine Weight /Weight ca 350kg Wheel Diameter / Wheel Slide 300mm Dimensions / Dimension 850 x 500 x 1,450 mm

specifications: - Saw blade diameter up to approx. 450 mm - Cutting range at 90° approx. - 60 x 250 mm - 140 x 120 mm - 100 x 200 mm - in miter at 45° approx. - 60 x 190 mm - 140 x 80 mm - 100 x 160 mm - in miter at 15° approx. - 100 x 60 mm - Miter adjustment left + right - Pneum. Saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 2.2 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1200 x D 900 mm - Weight approx. 280 kg

Available in two versions - single-phase and three-phase The construction is made entirely of stainless steel AISI -304 construction Easy operation process. A safety system where the belt stops working in an emergency. ON – OFF switch on a button Security system when opening the door Easy cleaning with water pressure CE certified machine Supplied with a set of strips, and on order, strips for frozen and chilled meat are supplied. Technical data: Wheel diameter 200 mm. Motor power 0.75 kW, 230 /400V, three-phase Equipped with a special plate for adjusting the thickness of the pieces and a piston Tape length: 1,600 mm. Machine weight 57 kg.

Manufacturer: Medoc The machine is made of sturdy 18/10 stainless steel construction; Suitable for working in harsh conditions; Floor model; Automatic preset control to fix the work bar; The model has a fixed top, as an option it is offered – with a removable top; Model for right-handed operation; Equipped with a special plate for adjusting the thickness of the pieces and a piston; Easy cleaning with pressurized water. Belt width: 2500 mm.; diameter – 300 mm.; Security system where the tape stops at the 4th second. ON – OFF activation of a button in the event of an emergency Design with smooth surfaces, where the machine is easy and quick to clean. Certified machine meeting CE norms. Technical data: Wheel diameter: 300 mm. Motor power: 3 HP, 230 / 400V, three-phase Tape length: 2,500 mm. Machine dimensions: 325 / 745 /1670 m ...

cutting diameter:520 mm saw band length:7239 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min cutting width at rectangle material:520 mm total power requirement:9,5 kW weight of the machine ca.:3,8 t Machine with multi feed device chip conveyor infeed roller stand

Blade length: 5600mm, opening width: 1000mm, band length: 2800mm, an inspection is possible.

Band saw in cast-iron CENTAURO model CL800 not at CE norms

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

I sell a continuous double mitre saw with scoring OMGA TI2500 Super, year of construction 2003. Motor 5kW on each side for both main saw and scorer. Working width max. 1200mm Cutting depth (slot length) 2500mm Underpressure for this and light elements 1 pc. on each side. Self pump. Material pressures top 1 pc. on each side. Available same. Fully operational. All errors fixed.

– after technical inspection – good condition – Italian production TECHNICAL PARAMETERS: wheel diameter 800 mm cutting height 420 mm .max. width of cut material 780 mm cutting width at a ruler of 575 mm cutting width using rollers 195 mm .max. width of material cut with a feed of 355 mm .max. cutting belt width 40 mm top and bottom belt guidance feed speed range 0-12.5 m/min feed speed adjustable on the inverter feed roller height 140 mm pneumatic feed pressure main engine 4 kW feed motor 0.75 kW connection diameter 100 mm dimensions (L/W/H) 260 / 165 / 115 cm weight 700 kg

– after technical inspection – very good condition TECHNICAL PARAMETERS: saw wheel diameter 1100 mm saw wheel width 105 mm element height up to 380 mm maximum element width 375 mm cutting width to the right of the saw 170 mm cutting width to the left of the saw 205 mm feed speed adjustable 5 – 40 m / min ten feed rollers roller diameter 110 mm hydraulic material pressure rolls for material return electric belt tension cleaning of belt wheels ENGINES: main 22 kW hydraulic pump 3 kW belt tension 1,5 kW transport dimensions (L/W/H) 380 / 245 / 160 cm weight ~ 2700 kg The band saw is designed for longitudinal sawing of beams, edges and scoots. They are widely used in the sawmill, carpentry and furniture industries. These machines are characterized by high reliability, simple operation and high efficiency. The use of a tilting guide in the sawing  ...

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

– after technical inspection – very good condition TECHNICAL PARAMETERS: saw wheel diameter 1100 mm saw wheel width 105 mm workpiece height up to 380 mm maximum width of the element 375 mm cutting width to the right of the saw 170 mm cutting width to the left of the saw 205 mm feed speed adjustable 5 – 40 m / min ten feed rollers Roll diameter 110 mm Hydraulic material pressure rollers for material return Electric belt tension Belt wheel cleaning ENGINES: main 22 kW hydraulic pump 3 kW belt tension 1.5 kW transport dimensions (length / width / height) 380 / 245 / 160 cm weight ~ 2700 kg

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Horizontal band saw HEMA HTR 400 Special band saw, for example, for cutting deep-drawn plastic parts or insulating materials (glass wool or rock wool) Built in 2000 Blade length: 3,900 mm Motor power saw: 1.5 kW Cutting speed: max. 1,200 m/min Cutting width: max. approx. 650 mm Cutting height: ma. approx. 230 mm Conveyor belt width: 650 mm Table length: 160 cmm Table height constant: 95 cm (The sawing unit itself is adjustable in height) Roll diameter: 40 cm Suction conveyor belt: connection for external air supply 100 mm Feed speed conveyor belt: infinitely variable Height adjustment by handwheel – display via counter Blade tension indicator Suction nozzle: 2 x 100 mm Engine brake Limit switch-secured doors CE marking Machine dimensions – approx. dimensions: 200 cm x 160 cm x 150 cm (LxWxH) Weight: approx. 700 kg The conveyor belt is cut on one side  ...

21-12 Bandsaw for cardboard and foam Sweden (used) Type 3000 Table dimensions 3000x 1250 mm Automatic rulers Max. cutting width 1250 mm Max. cutting height 160 mm Cast iron wheels diameter 320 mm Band width 15 mm Motor power 2 kw 400 V Ruler motor power 2x0,18 kw 400v Saw dust outlet diameter 100mm Made in Sweden Transport dimensions 3900x1350x1600mm Weight 330 kg Price 1200 Eur (EXW Jonava, Lithuania)

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 120 x 85 mm Mitre cutting area at 45° round: 85 x 85 mm Saw blade speed: 40/80 rpm Cutting speed: Drive motor: 380 V, 1.0/1.2 kW Space requirements: 850 x 520 x 1500 mm Weight: approx. 200 kg

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

AGAZZANI band saw model COSMA 800mm in steel, Solid flywheels, 5.5 HP engine, 0-45° tilting table, blade guide. Machine not according to CE standards, for export

Friggi Bandages Panel and Block Saw Model 104/FG 700 TS with sawing range, length 650 mm, width 1500 mm, height 450 mm, table load max. 4000 kg. Machine immediately available free truck loaded.

High Cutting Plates and Block Saw Manufacturer: Danobat: Sawing Range: Length: 500 mm, Width: 2100 mm, Height: 500 mm, Table Load: 10000 kg. Machine immediately available and available. Free truck loading.

HEMA UH 700 YOC 1987 Motor power 3 kW Roller diameter: 700 mm max. cutting width: 680 mm max. cutting height: 480 mm Saw blade length: 5,150 mm APA (Panhans) roller guide top + bottom Engine Brake incl. Aigner table extension with 2 rails (can be mounted on 2 sides) incl. various band saw blades Suction connection: D 125 mm Dimensions: approx. 129 x 800 x 230 cm (W x D x H) Weight: 580 kg School machine – The machine comes from a school training school.

Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min

Specifications: Cutting width 1050 mm Table size 800 x 820 mm Automatic travel approx. 340 mm Cutting height under guide 400 mm Cutting height under the handwheel approx. 290 mm Belt length 5250 - 5380 mm Infinitely variable speeds - Gearbox stage 1 17 - 79 m/min - Gearbox stage 2 67 - 305 m/min - Gearbox level 3 207 - 940 m/min

Data: Saw blade 4500 x 13 mm Cutting height max. 200 mm Blank diameter from 200 - 1500 mm Cutting speed approx. 1Technical50 - 1500 m/min , infinitely variable Hydraulic material clamping Hydraulic swivel device Drive power saw motor 4.0 kW Rotary actuator hydraulic 1.5 kW