129,242 used machines on RESALE, but how to find them? Machine Search
Key data: 1060 mm
Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...
A horizontal double-column bandsaw Behringer is available. Cutting range round material: 340mm, cutting range square material: 340mm/340mm, cutting speed: 120m/min, saw band dimensions X/Y/Z: 4860mm/32mm/1.1mm, machine dimensions X/Y/Z: approx. 3250mm/2600mm/1650mm, weight: approx. 2500kg. An on-site inspection is possible.
Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.
Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs
Behringer HBM 540 A Automatic Band Saw Year of manufacture 2005 Flat working area 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min Feed roller conveyor driven 8750mm Width 1100mm Discharge roller conveyor not driven 5020mm width 910 Conveyor The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals
Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg
Key data: 400 mm
What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.
in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed 27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m
cutting diameter: 650 mm saw band length: . mm cutting width: 1000 mm Cutting height: 650 mm weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Cutting speeds: 16–170 m/min Working area: approximately 670 mm Material support height: 700 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution ...
Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.
Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod
cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine parameters with additional soft keys + backlit disp ...
Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades
Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible.
cutting diameter: 225 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 160 x 140 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 140 x 140 mm capacity 60 degrees: flat: 110 x 80 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90 mm vice: 245 mm turning speed range:: 46/92 m/min saw band length: 2450 x 27 x 0,9 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 265 kg dimensions of the machine ca.: mm Equipment: - compact / robust manual band saw - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band ten ...
cutting diameter: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 150 x 150 mm capacity 45 degrees: flat: 150 x 210 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 100 mm dimensions of saw-band: 2455 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: ca. 900 mm total power requirement: 1,2 kW weight: 240 kg range L-W-H: 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating i ...
cutting diameter: 225 mm saw band length: 2480 mm table height: 910 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 160 x 160 mm capacity 60 degrees: round: 100 mm capacity 60 degrees: square: 100 x 100 mm turning speed range:: 45/90 m/min dimensions of saw-band: 2480x27x0,9 mm total power requirement: 1,5 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3650 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW Control: weight: 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including dig ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950 x 27 x 0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - ...
cutting diameter: 280 mm capacity 90 degrees: flat: 380 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 300 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 200 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3440 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW dimensions of the machine ca.: 1647 x 2157 mm Control: weight: 720 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - saw band guide made of hard met ...
cutting diameter: 330 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: flat: 350 x 320 mm capacity 45 degrees: round: 320 mm capacity 45 degrees: square: 300 x 300 mm capacity 60 degrees: flat: 230 x 310 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: round: 200 mm turning speed range:: 15 - 100 m/min dimensions of saw-band: 4640 x 34 x 1,1 mm engine output: 4,0 kW Control: weight: 1190 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mm Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving ...
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min saw band length: 3650 x 27 x 0,9 mm weight of the machine ca.: 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension ...
cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 90 degrees: square: 260 mm capacity 45 degrees: flat: 230 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 230 mm capacity 60 degrees: flat: 170 x 100 mm capacity 60 degrees: square: 155 mm capacity 60 degrees: round: 175 mm turning speed range:: 18 – 110 m/min dimensions of saw-band: 3.375 x 27 x 0,90 mm work height max.: 880 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 840 kg dimensions of the machine ca.: 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic cont ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 x 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 x 110 mm capacity 60 degrees: flat: 110 x 110 mm vice: 285 mm turning speed range:: 36 + 72 m/min dimensions of saw-band: 2950 x 27 x 0.9 mm Control: MEP NC coolant tank: 95.0 l total power requirement: 1.5 / 1.8 kW weight of the machine ca.: 435 kg dimensions of the machine ca.: 1000 x 2000 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions Front right, rotatable - Optional manual or automatic saw bow lowering Continuously adjustable saw bow lowering - Saw blade guide made of carbide ...
cutting diameter: 225 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 160 x 140 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 140 x 140 mm capacity 60 degrees: flat: 110 x 80 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90 mm vice: 245 mm turning speed range:: 46/92 m/min saw band length: 2450 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1.530 x 900 x 1.720 mm Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base with - coolant device - manual saw band tension (star gri ...
cutting diameter: 180 mm capacity 90 degrees: square: 180 x 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 125 x 110 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 x 70 mm capacity 60 degrees: round: 70 mm turning speed range:: 40 / 80 m/min saw band length: 2.130 x 20 x 0,9 mm total power requirement: 0,75 kW weight of the machine ca.: 190 kg Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructi ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow loweri ...
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3650 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW Control: weight: 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - inclu ...
cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine parameters with additional soft keys + backlit disp ...
cutting diameter: 250 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 290 x 210 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 210 x 200 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 130 x 130 mm capacity 60 degrees: flat: 140 x 130 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: 940 mm total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1250 x 1500 x 1700 mm Equipment: - compact / robust manual band saw (INDUSTRY) for sawing solid material and profiles - ball bearing support table for miter cuts left 60° to right 45° durable + easy miter adjustment - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manually adjustable qu ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 x 180 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 x 110 mm capacity 60 degrees: round: 120 mm vice: 285 mm turning speed range:: 36 / 72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 370 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - co ...
roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - movi ...
Band Saw Machine Metallkraft BMBS 300x 320 CNC BJ 2022
Key data: 280 mm
Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...
Key data: 670 mm
Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg
Bernardo Specifications Cutting range around 90° 125 mm Cutting area flat 90° 100 x 150 mm Cutting range around 45° 95 mm Cutting area flat 45° 95 x 76 mm Cutting range around 60° 50 mm Cutting area flat 60° 50 x 56 mm Working height 730 mm Saw blade dimensions 1638 x 13 x 0.65 mm Cutting speeds 23 / 34 / 54 m/min Engine output S1 100% 0.55 kW Motor input power S6 40% 0.75 kW Voltage 230 V Machine dimensions (L x W x H) 1000 x 550 x 1100 mm Weight approx. 68 kg
Manufacturer: KASTO Model: Twin A 4 AU CNC Year of Manufacture: 2004 Cutting Capacity: 400 mm x 400 mm (Ø 400 mm) Technical Specifications - Cutting Range Round: 400 mm - Cutting Range Square: 400 x 400 mm - Material Feed per Stroke (automatic): 600 mm - Multiple Feed Length: 99,999 mm - Cutting Speed: Stepless, 20–130 m/min - Total Drive Power: 7 kW - Saw Motor Power: 4 kW - Speed Reduction: Stepless adjustable - Material Height: 100 mm - Saw Blade Dimensions: 5700 x 41 x 1.3 mm - Shortest Cutting Length (automatic): 6 mm - Shortest Remnant Length (automatic): 80 mm - Voltage: 380V / 50Hz - Machine Dimensions (LxWxH): 2415 x 2400 x 1720 mm - Weight: 2200 kg Special Accessories - Coolant system - CNC control - Idle run monitoring - Machine roller table - Band tension control - Height measurement system - Light barrier - End stop Optional Roller Conveyors: - Roller Conveyor 30 ...
Material feed in any length (max. stroke 400 mm) Cutting diameter: around 360 mm, square steel 90°: 360 x 360 mm Cutting speed infinitely adjustable: 17 - 110 m / min. Conveyor Instruction manuals and additional saw blades available Further technical data on request Machine weight: approx. 2,400 kg
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm sawband length: 5334 mm sawband width: 41 mm max. bar feed (single stroke): 600 mm cutting speed min.: 14 m/min cutting speed max.: 102 m/min power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS total power consumption: 10 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2840 mm space requirements -front/back-: 2800 mm total height: 2130 mm total weight approx.: 2540 kg
Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.
Saw band dimensions X/Y/Z: 2450mm/27mm/0.9mm, max. cutting capacity at 90°: 220mm/220mm, max. cutting capacity at 45°: 150mm/150mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 1300mm/800mm/1500mm, weight: approx. 250kg. An on-site inspection is possible.
Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW
Opus 550 TF Table dimensions: 600 x 760 mm Depth of throat: 550 mm Max height of workpiece: 430 mm Sawspeed: 120x1200 m/min Length of band saw: 4700 x 27 mm Power needed: 4.2 kW Weight: 900 kg
Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm
Key data: 360 mm
SPECIFICATIONS Max. cutting height: 360 mm Saw blade length: 5334 mm Saw band width: 41 mm Max. bar feed (single stroke): 600 mm Cutting speed of: 14 m/min Cutting speed up to: 102 m/min Saw blade drive power: 5.5 kW Power consumption 10 kW Space requirement -left/right-: 2840 mm Space requirement -front/rear-: 2800 mm Total height: 2130 mm Total weight approx.: 2540 kg from warehouse 95643 Tirschenreuth, loading free Shipping possible, transport costs are borne by the buyer The price includes 19% VAT! This will be shown separately in the invoice. This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. No returns for used goods! No warranty. A viewing of the goods is possible by arrangement. If you have any questions, please send us a message, we will answer as soon as possible. Thank you very much! Changes / errors in the techni ...
maximum number of results exceeded
please refine your search
