129,239 used machines on RESALE, but how to find them? Machine Search
Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.
Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)
Bone band saw BIZERBA FK22, manufacturer = Bizerba type FK22, 220/ 380 V, 1,080 KW, untested! Auction-ID: A7-45675-30
Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230
Key data: 530 mm
Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual
with 2 pcs. roller conveyor Auction-ID: A7-45452-19
Metal Band Saw Saw blade welding machine, grinder Swivel table 380 V 16 A Electrics must be checked. Saw Blade Compressor for air blowing.
MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg
Key data: 220 mm
MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg
ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor
total power requirement:380V 50 HZ,1,67 kW dimensions of the machine ca.:1,4 x 1,8 x 1,4 m
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
Horizontal metal band sawing machine, often used for cutting metal profiles and pipes to size. Serial number: 2010 Date: Speed: 20 - 29 - 51 m/min Max. cutting capacity 90°: 128 mm Saw blade specifications: 1640 x 13 x 0.6 mm Voltage: 1/N/PE AC 230 V 50 Hz Power: 550 W Degree of protection: IP 54 Weight: 95 kg
machine ready for transport and to be assessed on viewing day
Key data: 150 mm
ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28
Dimensions: Optimum feed roller conveyor 401x45x90 cm. Discharge roller conveyor Optimum 305x45x90 cm
Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5)
cutting width: 250 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...
Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 V Baujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm
dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm output: 1,5 / 1,8 kW Weight: 440 kg dimensions: 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350
Technical Parameters Maximum cutting performance Round: 650mm Square 650×800mm Saw blade Speed 20~80 m/min Size 54X1.6 Guidances Tungsten carbide and bearing blade guides Cleaning Wire Brush & Flood Coolant Voltage Hydraulic Power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW
AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronou ...
cutting diameter: 420 mm saw band length: 0 mm cutting width: 0 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 260 mm saw band length: . mm cutting width: . mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1986 Forte SBA 401.S 1. designation of the machine Forte band saw 400x400 mm 2. manufacturer of the machine: Forte 3. year of construction: 1986 4. intended use of the machine Sawing of metallic materials 5. current condition: Used, ready for operation on inspection TECHNCAL DATA Working range Rods and tubes up to 0 400 resp. Maximum cut-off length 600 mm Double feed 1. 200 mm Power requirement ca. 9,5 KW Sage drive motor power 4, 7 / 6 K I Gearbox for Sage drive Stober R 65VI•/ 4 Cutting speed I 12 - 50 m/min. Cutting speed Il 24 - 100 m/min. Sage belt dimension 6.200 x 38 x 1,2 mm Hydraulic oil ca. 46 Liter Viscositat 68 est bei 4□0c ca. 50 Liter (empfohlen "Curtis S 6") ca. 3.000 kg Coolant 800 mm Weight of the machine Material support height Find more here - / Contact us at -
- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l
Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm
Metal band saw OPTIMUM OPTIsaw S275N - Exhibition machine - feed infinitely adjustable, swivelling ---------- Technical data ---------- Swivel range: 0 - 60 Â, cutting height: 150 mm, cutting depth: 230 mm, saw blade speed: 45 / 90 m/min., saw blade length: 2,480 mm, motor 400 V: 1.1 kW, dimensions (LxWxH): 1,400 x 530 x 1,360 mm, weight: 185 kg - new exhibition machine -
Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via controller: 25 - 235 m/min Conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours For more technical data, see photo or on request Machine weight: approx. 3 t
cutting diameter: 500 mm saw band length: 6990x41x1,3 mm cutting width: 860x500 mm cutting speed: 15-90 m/min Feed: 400 mm/min Rapid movement: 2500 mm/min main drive motor: 5,5 kW cutting length min.: 8 mm total power requirement: 8,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,3x1,2x2,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25078 Specifications: - Cutting range at 90° around 550 mm - flat 570 x 550 mm - Cutting speed infinitely variable 20 to 100 m/min - Hydr. Raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 to 10 m/min - Material replenishment machine - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW -Attack - 2 x roller conveyor 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg
Behringer HBP 320 Depth of throat: 320 mm Sawspeed: 16 > 100 m/min Length of band saw: 4860 x 32 x 1,1 mm Power needed: 3 kW Length : 2500 mm Depth : 2400 mm Height: 1600 mm Weight: 2400 kg
maximum number of results exceeded
please refine your search
10 € 
