We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,303 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Two cutting speeds - Vice with counter-clamping device - Infinitely variable mitre adjustment (-45° to +60°) - Coolant device - Material support roller - Pin chip remover and chip drawer
used
Used automatic tape saw Brand: DOALL Model: C-520-NC Round cutting capacity: 520mm Cutting capacity: 520x520mm Saw speed: 0 - 100 m / min Dimensions of the saw blade: 6400x54x1.3mm Motor power: 8.2KW
used
Power: 1.8/1.5 kW Power supply: 400v/3/50hz Weight: 600 kg Size: 970 X 2000 X 2000 Cutting Capacity: 260 (Round) | 250 (Square) | 320 X 200 (Rectangular) Blade size: 3150 x 25.4 x 0.9 mm Year 2002
used
Behringer HBP 430a Rect-Cap (H) 431.8 mm Rect-Cap (W) 431.8 mm Rounds-Cap 431.8 mm Square-Cap 431.8 mm Power 5.5 kW Type (Auto, Manual, Semi) Auto Blade Width 50.8 mm Blade Thickness 1.6002 mm Blade Length 5,791.2 mm
used
Capacities: 90 degrees 260 (round) 300 x 180 (block) Bundle: 200w x 140h Blade size: 2660 x 34mm Dimensions: 21000w x 2000d x 1500h mm
used
used
PINHEIRO SFD11 2 sawing machine with 2 saws facing each other Year 1988
used
Capacity ø300mm Double-sided miter 45gr left 60gr right Equipped with mist lubrication
used
Capacity: 240 x 280mm Double sided miter Semi-automatic Mist lubrication system
used
The saw is in good technical condition. Machine weight 780 kg By prior arrangement, the possibility of a tour in progress.
used
The machine is in good technical condition. Round material 260mm. Maintained regularly. Can be shown in operation.
used
Capacity: 200 x 250 mm good condition video available
used
Capacity 350 x 270 mm Material probe Two sided miter
used
Semi-automatic, 90 degrees Quick-release system Cooling pump Including short roller conveyors
used
Semi-automatic Double-sided miter inpsection possible video available
new
Thickness of sanding paper: 1,1 mm Width of sanding paper: 34 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Thickness of sanding paper: 1,6 mm Width of sanding paper: 54, 60 und 80 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity 263 x 400 mm Double column Single-sided miter Cooling pump
used
Capacity: 330 x 510 mm Single sided miter Variator speed setting Semi-automatic (self-lowering and rising)
used
Capacity 275 x 230 mm Manually operated, with bag cylinder Cooling pump Quick-release clamp
used
Capacity 300 x 180 mm / ø 255 mm / square 230 x 230 mm Semi-automatic Double-sided miter 0-60 left / 0-45 right
used
Capacity: 280 x 220 mm Double sided miter Mist lubrication
used
Capacity 410 x 260 mm Double-sided miter Semi-automatic Mist lubrication system Digital angle readout
used
material dimensions max. round: Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg
used
There are three identical machines available, connected load: 0.25/0.37kW, weight: 250kg.
used
With documentation, without accessories or documentation, has been regularly serviced, an on-site inspection is possible, video is available.
used
Connected load: 2kVA, an inspection is possible.
used
Cutting range: 90° round: 210mm, 90° square: 200x200mm, 90° flat: 270x200mm,45° round: 180mm, 45° square: 180x180mm, 45° flat: 180x190mm.
used
Cutting range round/ rectangular: 180/ 180x300mm, saw blade speed: 22-65m/min, saw blade dimensions: 2362x20x0.9mm.
used
Max. cutting diameter: 250mm.
used
There are three metal band saws available, connected load: 1.1kW, weight: 170kg.
used
Cutting range round/ square: 400mm, cutting speed: 12-100m/min.
used
Cutting speed: 10-1200m/min, power: 2.3kW.
used
Band dimensions: 2625x20mm.
used
Length: 2200mm, width: 1200mm, height: 535mm, weight: 385kg.
used
Cutting dimensions: 500x320mm, connected load: 2.2kW, length: 3550mm, width: 2000mm, height: 2110mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
used
Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Band length: 3505 mm Band width: 25 mm Sheet thickness: 0.95 mm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 2000 mm Width: 1900 mm Height: 1400 mm
used
Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible.
used
Cutting diameter: 290mm, cutting width 320mm, saw blade length: 3100mm, saw blade dimensions X/Y/Z: 3100mm/27mm/0.9mm, miter cuts min./max.: -60°/+60°, cutting speed: 20m/min - 100m/min. Weight: approx. 570kg, dimensions X/Y/Z: approx. 1800mm/950mm/2100mm. An on-site inspection is possible.
used
Saw blade length/width: 8400mm/50mm. Documentation available. On-site inspection is possible.
used
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
used
total power requirement:380V 50 HZ,1,67 kW dimensions of the machine ca.:1,4 x 1,8 x 1,4 m
used
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
used
Technical data Cut range: round up to: 100 mm Band length: 1730 mm Voltage 50 Hz 3x: 220 Volt Power: 0.2 kW
used
Including conveyor
used
Cutting speed adjustment - archer swivels 45°
used
220/380 V; 5.4/3.2 A; Cutting height: 430 mm; ATTENTION: without lattice boxes and without pallets (pallet exchange is possible)
used
Equipped with material clamp, pneumatic lifting + lowering, including various spare saw belts