band saw vertical used for sale

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 130 mm feed stepless: 0 - 1.000 mm/min rapid return speed: 1.550 mm/min manual operated rotary table: +/- 90 ° capacity 90 degrees: flat: 300 x 40 mm capacity 90 degrees: round: 130 mm material feed: L41NC programmable length: max. 9999,9 mm traversing speed: max. 50 m/min total power requirement: 3,50 kW weight of the machine ca.: 1,00 t dimensions of the machine ca.: 3,50 x 2,00 x H2,00 m Miter cut of +/-90, L41 NC electronic length stop, infeed and outfeed conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 x 2,5 x 32 mm cutting diameter: 100 mm cutting speed: 33/66 m/min height of material-table: 900 mm total power requirement: 1,8 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,05 x 0,50 x 1,80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 10000x2500x1600 mm Weight: 3300 kg Total power requirement: 16,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement:2,2 kW dimensions of the machine ca.:2,15 x 1,47 x 2,24 m JAESPA V 380 DG /DGHS Vertical Mitre Band Saw This machine is a vertical double-mitre band saw designed for professional use in the metal, steel and mechanical engineering industries. In addition to straight 90° cuts, this band saw also enables mitre cuts to the left and right. The mitre range is up to 60° on one side and up to 45° on the other. This makes the machine particularly suitable for cutting profiles, tubes and solid material. The cutting speed and hydraulic saw feed can be adjusted to suit the material being cut. The machine is equipped with a coolant system. Technical specifications: ·Saw motor: 2.2 kW ·Hydraulic pump: 0.37 kW ·Coolant pump: 0.18 kW ·Belt speed: 17?100 m/min ·Saw blade dimensions: 4,250 × 34 × 1.1 mm ·Workpiece support height: 1,000 mm ·Coolant tank: 50 litres Robust ...

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

Offer 26343 Technical data: - Saw blade dimensions - vertical 650 x 4.4 x 50 mm positive - Horizontal 500 x 4.4 x 40 mm positive - Notching range 90° at approx. H 260 x D 190 x W 140 mm - 4 axis – NC control for cutting angle, notching height, notching depth - Vertical saw blade can be swivelled 45° outwards + 60° inwards - Horizontal saw blade can be swivelled 60° upwards and 55° downwards - Mitre stop of the profile support adjustable 60° to the left + right - Movable material support table - Pneumatic material clamping - Pneumatic coolant spraying device - 2 saw blades - Pneumatic connection 6 bar - Drive 400 V / 2 x 3 kW / 2800 rpm - Space requirement approx. W 1600 x H 1500 x D 1100 mm - Weight approx. 1300 kg

Serial No.: .432.05.266.15

Baljer & Zembrod Asterix AS/28H-R.D log sorting crane with saw. Year 1994. Approx. 9,500 operating hours. Used industrial machine. Last overhaul in 2023 and last service in 2026. Suitable for log handling and sorting operations in sawmills. Immediately available in Lugendorf, Austria.

EWD frame saw supports: four HDN 600 units, overhauled, and one GDZGE 600 unit, new. Heavy industrial components for sawmill applications. Overhaul completed in 2026. In stock and immediately available in Lugendorf, Austria.

Three VOLLMER circular saw blade sharpening machines available. 1) CANA/E, year 1988, serial 9179: semi-automatic sharpening of carbide or HSS circular saw blades, automatic mechanical tooth feed, adjustable pitch and swivelling grinding head; AEG 0.75 kW motor, 2,800 rpm, 220/380 V. 2) VOLLMER CNHV: mechanical semi-automatic machine for carbide-tipped blades, AEG 0.55 kW motor, 2,750 rpm, suitable for approx. 80–600 mm blade diameter. 3) VOLLMER 55/2 H2: robust mechanical machine for HSS and carbide blades, 0.4 kW, 2,830 rpm, blade range approx. 80–500 mm. Solid cast-iron construction. Last service 2024.

EWD GDZ GE 71 high-performance sash gang saw, year 2006, 600 mm stroke. Swing-frame design. Passage width 710 mm, passage height 710 mm, maximum 300 rpm, drive motor approx. 130 kW. Continuous feed through infinitely variable hydraulic transmission with reverse gear and automatic hydraulic overhang adjustment. Hydraulic upper infeed rollers with adjustable pressure, spherical roller bearings, automatic central lubrication, electrical push-button control and shaker chute for sawdust separation. Overhauled and serviced in 2023.

REX HOMS-410-K two-side high-performance planer and saw combination, year 2004. Exchangeable planer heads, centre-cut guide saw, lower and upper working shafts and special lower multi-blade circular saw. Maximum planing width 410 mm, planing height 280 mm, saw cutting height 90 mm, self-feeding workpieces from 900 mm. Electronic feed 8–48 m/min. Drives: 5.5, 15, 22 and 55 kW plus 7.5 kW feed. Machine dimensions approx. 4,500 x 1,700 x 2,215 mm; weight approx. 7,800 kg. 400 V, 50 Hz, three phase. Overhauled and serviced in 2024.

LINCK V30 chipper-canter line with integrated VS pre-cut saw for continuous operation, year 2000. Suitable for processing side boards and changing log dimensions. Circular-operation clamping technology, PLC control, frequency-controlled feed and synchronised clamping/sawing units. Example data: feed speed up to 150 m/min, log lengths 3.0–5.2 m, top diameter approx. 8–62 cm, resaw cutting height up to 350 mm. Modular system prepared for additional milling and sawing units. Overhauled and serviced in 2025.

MÜLLER Olympia Universal 571 sash gang saw, year 1994. Frame width 710 mm and passage height 710 mm. High-precision, energy-efficient saw designed for stability, durability and easy maintenance. Forged high-strength steel saw frame and stress-relieved welded side frame for low vibration. Patented frame guide without continuous adhesive-oil lubrication. Split quick-change feed rollers with pressure control, synchronised lifting system, overload-protected drive clutches, machined steel flywheels and shaker chute. Overhauled 2022; last service 2024.

General Description Universal vertical tool milling machine manufactured by the Kirov Machine Tool Plant, Odessa (USSR) . Designed for precision milling, drilling, slotting and general toolroom machining. The machine is equipped with a geared vertical spindle, T-slot work table and heavy-duty machine vise. Technical Details Manufacturer: Kirov Machine Tool Plant, Odessa (USSR) Machine type: Universal vertical tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle head T-slot machine table Heavy-duty machine vise included Longitudinal power feed Separate electrical cabinet Machine work light Condition Fair to good used condition. The machine appears mechanically complete with spindle gearbox, T-slot table, heavy-duty vise and electrical cabinet installed. Cosmetic paint wear, industrial staining and light surf ...

The Thimonnier M3200 is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag volume: 70 - 1. ...

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

I am offering them a complete vertical packaging plant. Multihead weigher by Ishida Vertical flow of Hassia Redatron and Bosch Bosch cartoning machine If you are interested, please contact me.

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

Vertical pallet transport

Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Tractive effort: to 25 Length: 2000 mm Room set: 3 piece

Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

P57 - used appr. 3 m³ / 3,000 litres polyester tank / GRP tank, Staffelstein tank, aboveground, vertically standing, good condition. capacity: appr. 3 m³ / 3,000 litres material: polyester / GRP height: 2.40 m width: 1.04 m length: approximately 1.60 m (with lid 1.80 m) Aboveground, vertically standing tank, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rain collection tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write ...

Table size: 410 x 900 Traverse path x/y/z: 560/410/380 mm spindle retainer: SK 40 spindle speeds: 22-6000 rpm feeds: x & z to 10000, y up to 240 mm / min space: 2600 x 2000 x 2300 mm weight: 3500 kg

P63 - used appr.4 m³ / 4,000 litres polyester tank / GRP tank, aboveground, standing vertically, in good condition. volume: appr. 4 m³ / 4,000 litres material: polyester / GRP height: appr. 2, 30 m (tank) / 2, 60 m (total) width: appr. 1, 35 m length: appr. 1, 86 m Aboveground, vertically standing tank on a steel frame. Dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL / ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give  ...

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

FZ15KS HIGH SPEED 4 axis vertical machining center X: 550mm Y: 400mm Z: 360mm 4th axis original Peiseler CNC Siemens 840D Table surface 1050 x 450mm Toolchanger 48 posts ISO 40 Spindle speeds up to 12000 1/min with 4th axis Renishaw broken tool detector Coolant through spindle swarf conveyor Can be inspected under power in our warehouse. Mimu machine tools (Italy)

vertical belt coil mixer for the food industry in stainless steel Usable volume: 600 litres Cylindrical mixing container with conical transition to the outlet Mixing unit, vertical belt coil circulating in the mixing container Drive mixing unit Geared motor make-up North 7.5 kW, at 61 min-1 as a plug-in gearbox with hollow shaft Engine efficiency class IE3 Shaft sealing due to high-quality shaft sealing rings Feeding with sack hook and support grid Outlet with flat slider in stainless steel hand-operated with knife head 4 kW at 1500 min-1 with liquid addition lance with basic frame On request with control for additional price

Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T

Table size: 1000 x 490 mm traverse path x/y/z: 800/510/500 mm spindle retainer: ISO 40 ISA kl. / gr. Table/spindle distance: 120/620 mm spindle speeds: 40-6000 rpm number of tool stations: 22 pieces feeds: x/y 1-3200 / z 1-2000 mm / min rapid traverse: x/y 1-3.2, z 1-2 m / min. Supply: 380 V, 19 kW space: 2850 x 2150 x 2600 mm weight: 3800 kg

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...

X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...